Surpass Hobby USA Surpass Hobby 40mm RC Motor Cooling Fan 16000RPM RC Car Fan
Bottom line: The Surpass Hobby 40mm RC Motor Cooling Fan 16000RPM RC Car Fan: 40x40x10mm frame clears most 1/8 and 1/10 chassis without spacers; main trade-off: listing contradicts itself on bracket spacing: 32mm in features, 24mm in description.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 40x40x10mm frame clears most 1/8 and 1/10 chassis without spacers
- ✓ 16000 RPM airflow aimed at 540/550 motor cans and ESC heat sinks
- ✓ CNC-machined 6061-T6 aluminum body, anodized rather than molded plastic
- ✓ JST plug drops onto standard receiver/ESC power without splicing
Cons
- ✗ Listing contradicts itself on bracket spacing: 32mm in features, 24mm in description
- ✗ Reversed JST polarity leaves the fan dead with no on-board protection
- ✗ No dBA figure published, and 16000 RPM 40mm fans are audible at idle
- ✗ No airflow (CFM) rating, so cooling gains are hard to compare to rivals
Manufacturer description
Surpass Hobby 40mm RC Cooling Fan Aluminum 16000RPM Motor Cooling Fan for for RC model car 1/8scale 1/10scale 540 550 motorFeartures:Designed for RC model car 1/8scale, 1/10scale, 540 550 motor.Easy to install, Small size and lightweight, convenient for you to install and remove.Compatible with all brackets with 24mm mounting holes.The speed can reach up to 16000 RPM, excellent heat dissipation effect to protect the motor.This motor cooling fan adopts JST connector, easy to install and use, and the wiring has positive and negative poles, and the wrong connection will not work, safe and…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Surpass Hobby 40mm RC Motor Cooling Fan 16000RPM RC Car Fan, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. On the listing's own facts, the case for it is "40x40x10mm frame clears most 1/8 and 1/10 chassis without spacers"; the main trade-off is "Listing contradicts itself on bracket spacing: 32mm in features, 24mm in description". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【40mm Motor Cooling Fan】Size: 40x 40x 10mm, Motor ESC Cooling Fan is designed for 1/8 1/10 scale RC model car truck.
- 【Protect Motor From Overheating】The speed can reach up to 16000 RPM, excellent heat dissipation effect to protect the motor. Small and light size, convenient for you to install.
- 【Premium Material】The motor cooling fan is made of high quality material 6061-T6 aluminum, CNC machined for precision, Anodized, for lightweight and durable performance ,workmanship exquisite.
- 【Cool Model Design】Heat sink is black body with cool orange patterns and lines, simple and cool. Esc cooling fan compatible with all brackets with 32mm mounting holes.
- 【Easy to Install】For JST connector is convenient, easy to install and use, and the wiring has positive and negative poles, and the wrong connection will not work.
Full Specifications
| Brand | Surpass Hobby USA |
|---|---|
| Model | SH4 |
| Voltage | 8.45 volts |
| Wattage | 18 watts |
| Material | Aluminum |
| Dimensions | 40x 40x 10mm |
| Unit Count | 1 Count |
| Noise Level | 50 db |
| Part Number | SH4 |
| Material Type | Aluminum |
| Cooling Method | Air |
| Compatible Devices | RC model cars and trucks |
| Power Connector Type | 4-Pin |
| Maximum Rotational Speed | 16000 rpm |
| Item Dimensions L x W x H | 1.57"L x 0.39"W x 1.57"H |
| 【40mm Motor Cooling Fan】Size | 40x 40x 10mm, Motor ESC Cooling Fan is designed for 1/8 1/10 scale RC model car truck. |
| Full listing title | Surpass Hobby 40mm RC Motor Cooling Fan 16000RPM RC Car Fan for ESC and Motor Fit for 1/10 1/8 RC Car Truck(Orange Black) |
Benchmark data for other processors
Ready to buy?
Surpass Hobby 40mm RC Motor Cooling Fan 16000RPM RC Car Fan for ESC and Motor Fit for 1/10 1/8 RC Car Truck(Orange Black) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- ASRock Phantom Gaming 360 LCD Cooler Debuts With Strong Numbers
- Open-Weight Models Caught Up on Cyber Benchmarks in Four Months — What That Means for Your Rig
- On-Device AI Keyboards: What a Sub-2GB LLM Needs to Run Local
- Qwen 3.6 27B Quantization Showdown: BF16 vs Q8_0 vs Q4_K_M on Consumer GPUs
- Best Streaming and Podcasting Gear for 2026: 5 Picks for Mic, Light, and Monitoring
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Old RAM Identification: Decode Part Numbers & Specs
- Mouse Wheel Scrolling Wrong Direction? Here's the Fix
- 50+ Raspberry Pi Project Ideas for 2025 (By Skill Level)
- Is My GPU Dying? 5 Warning Signs to Check Now
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- Kimi K3 Sold Out the Cloud — Can You Run It Locally?
- ROCm in 2026: Is AMD Finally a Real Local-LLM Option?
- USB-to-IDE Adapter vs CF-to-IDE for Imaging Retro PC Drives
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Can a Modern Sound Blaster G6 Replace an AWE64 for Retro PC Audio?
- Intel Arc LLM Inference: A770 & B580 Qwen3 tok/s Guide
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- Solar-Powered Bird Identifier: Raspberry Pi Zero 2W + AI Camera
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Building a New Gaming PC in 2026: The Complete Guide
- 8BitDo Pro 2 vs GameSir G7 SE vs DualSense: the best PC controller for retro emulation in 2026
- Renting AI Compute vs Running It Home: The RTX 3060 Math
- HyperX QuadCast 2 vs Blue Yeti for Streaming & Podcasting (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090