Skip to main content
LINKUP – AVA PCIe 4.0 Gen 4 x16 Riser Cable – RTX 4090 RX7900 Ready – Boost Your Gaming Performance – 90 Degree White (30cm)
LINKUP

LINKUP AVA PCIe 4.0 Gen 4 x16 Riser Cable

Status: LINKUP: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The LINKUP AVA PCIe 4.0 Gen 4 x16 Riser Cable: Specified at -4.0dB at 8GHz and -8.5dB at 16GHz insertion loss, within PCIe Gen 4 limits; main trade-off: does not fit Cooler Master V1 or some Lian Li vertical GPU brackets.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Specified at -4.0dB at 8GHz and -8.5dB at 16GHz insertion loss, within PCIe Gen 4 limits
  • ✓ 90-degree exit on a 30cm run keeps vertical GPU routing free of tight connector bends
  • ✓ Covers RTX 4090, 4080, 4070, 4060 and RX 7900 XT, 7800 XT, 7700 XT, 7600 cards
  • ✓ Still works with RTX 30 and RX 6000 GPUs on X570, B550, Z590 and Z690 boards
  • ✓ 24K gold-plated connectors, pure copper wiring and shielded anti-interference housing

Cons

  • ✗ Does not fit Cooler Master V1 or some Lian Li vertical GPU brackets
  • ✗ Misaligned case screw holes can skew the GPU unless you attach the riser first
  • ✗ Fixed 30cm length means string-measuring the slot-to-bracket path before buying
  • ✗ Uses PCIe 5.0 grade wire but is rated only to PCIe 4.0 speeds, not Gen 5

Manufacturer description

Resolve Gen 4 riser cable issues with our specially designed cable for high power RTX4000 series GPUs. Using next-gen (PCIE 5.0) wires, this PCIE 4.0 riser cable delivers exceptional performance. With -4.0dB@8Ghz and -8.5dB@16Ghz insertion loss, it meets PCIe Gen 4 (4.0) specs, ensuring lightning-fast data transfer rates. Upgrade your setup and enjoy seamless gaming. Next-Gen Compatibility: Designed for next-gen RTX 40 (4000) series GPUs (RTX 4090, 4080, 4070, 4060 & ti versions) and RX 7000 series RDNA 3 GPUs (RX 7900 XT, 7800 XT, 7700 XT, 7600, 7500). Backward compatible with RTX 3000…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for LINKUP AVA PCIe 4.0 Gen 4 x16 Riser Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "Specified at -4.0dB at 8GHz and -8.5dB at 16GHz insertion loss, within PCIe Gen 4 limits"; the main trade-off is "Does not fit Cooler Master V1 or some Lian Li vertical GPU brackets". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, confirm the board side: this card needs a free PCIe slot of the width the card uses. Your motherboard manual lists which slots share lanes with M.2 sockets or other slots. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this riser cable work with an RTX 4090?

Yes. LINKUP lists the AVA as designed for RTX 40 series cards including the 4090, 4080, 4070 and 4060 plus their Ti variants, and for RX 7000 RDNA 3 GPUs such as the 7900 XT, 7800 XT, 7700 XT and 7600.

Does it actually hold full PCIe 4.0 speed, or will my GPU drop to Gen 3?

LINKUP specifies -4.0dB insertion loss at 8GHz and -8.5dB at 16GHz, which the company states meets PCIe Gen 4 requirements, and the cable uses next-gen PCIe 5.0 grade wire to get there.

Will it fit my vertical GPU bracket?

Not universally. LINKUP notes it does not fit Cooler Master V1 brackets or some Lian Li vertical brackets. Check your bracket model, and measure the motherboard slot to mount distance before choosing the 30cm length.

Can I use it with an older RTX 3080 or RX 6800 XT?

Yes. It is backward compatible with RTX 3000 series cards such as the 3090, 3080, 3070 and 3060 and with RX 6000 RDNA 2 cards including the 6950 XT, 6900 XT and 6800 XT, on X570, B550, Z590 and Z690 chipsets.

How do I install it without misaligning the graphics card?

LINKUP recommends attaching the riser to the GPU before you screw the GPU to the I/O bracket mount, because some cases have misaligned screw holes. Use a string to trace the curve and confirm 30cm is the right length. For warranty terms, check the current product listing.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Resolve Gen 4 riser cable issues with our specially designed cable for high power RTX4000 series GPUs. Using next-gen (PCIE 5.0) wires, this PCIE 4.0 riser cable delivers exceptional performance. With -4.0dB@8Ghz and -8.5dB@16Ghz insertion loss, it meets PCIe Gen 4 (4.0) specs, ensuring lightning-fast data transfer rates. Upgrade your setup and enjoy seamless gaming.
  • Next-Gen Compatibility: Designed for next-gen RTX 40 (4000) series GPUs (RTX 4090, 4080, 4070, 4060 & ti versions) and RX 7000 series RDNA 3 GPUs (RX 7900 XT, 7800 XT, 7700 XT, 7600, 7500). Backward compatible with RTX 3000 series (RTX 3090, 3080, 3070, 3060 & ti versions) and 6000 series RDNA 2 GPUs (RX 6950 XT, 6900 XT, 6800 XT, 6700 XT, 6600 XT, 6500 XT) + Chipsets X570, B550, Z590, Z690 *Does not fit Coolermaster V1 and some Lianli vertical brackets
  • High-Quality Construction: Our cables are built with top-grade materials for optimal performance. Featuring 24K gold-plated connectors, heat-dissipating and anti-interference shielded housing, premium wire shielding, pure copper oxygen wiring, PVC sheathing, high-durability ABS plastics, glass-reinforced epoxy laminate, teflon, copper, aluminum, and iron components
  • Important Notes: Please be aware that certain cases may have misaligned screw holes, which can result in GPU misalignment when installed. To avoid this issue, we recommend installing the riser cable onto the GPU before securing the GPU to the I/O bracket mount. When determining the cable size, please measure the distance between the motherboard PCIe slot and the location where the GPU will be mounted. You can use a string to determine the required curve and length of the cable for reference.

Full Specifications

Size30cm
BrandLINKUP
ColorWhite
ModelAG-P4-SR030-WH
ManufacturerLINKUP Technology Inc.
ItemPartNumberAG-P4-SR030-WH
Full listing titleLINKUP – AVA PCIe 4.0 Gen 4 x16 Riser Cable – RTX 4090 RX7900 Ready – Boost Your Gaming Performance – 90 Degree White (30cm)

Ready to buy?

Amazon shows no buyable offer for LINKUP at the last check. An Amazon search for this model lists current offers. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Search Amazon for an in-stock match →

Read our analysis

SpecPicks coverage that features this Accessorie.

Related Accessories

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
LINKUP – AVA PCIe 4.0 Gen 4 x16 Riser Cable – RTX 4090 RX7900 Ready – Boost Your Gaming Performance – 90 Degree White (30cm)
Unavailable on Amazon. Current offers:
LINKUP
Search in-stock →