EZDIY-FAB
EZDIY-FAB ATX 24-pin 90 Degree Power Connector Adapter 5V 3 Pin ARGB Rainbow Female to Male Power Adapter for Computer Motherboard ATX Power Supply- White-1 Pack
Bottom line: The EZDIY-FAB ATX 24-pin 90 Degree Power Connector Adapter 5V 3 Pin ARGB ($17.99 on Amazon as of 2026-10-20 22:23 UTC): 90 degree turn routes the 24-pin cable horizontally in limited-height chassis; main trade-off: adds roughly an adapter's depth of clearance beside the board edge.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 90 degree turn routes the 24-pin cable horizontally in limited-height chassis
- ✓ Takes lateral cable strain off the motherboard 24-pin connector
- ✓ Female-to-male passthrough, plug and play on any standard ATX board and PSU
- ✓ Built-in 5V 3-pin ARGB rainbow lighting at the 24-pin entry point
Cons
- ✗ Adds roughly an adapter's depth of clearance beside the board edge
- ✗ ARGB needs a free 5V 3-pin header, which budget boards often lack
- ✗ White housing stands out against black boards and cables
- ✗ Sold as 1 pack, so multi-system builders pay per machine
Manufacturer description
The EZDIY-FAB ATX 24-pin 90 degree power connector adapter solves a problem every small-form-factor builder knows: a stiff 24-pin PSU cable fighting the side panel. This white adapter sits between your power supply cable and the motherboard header, turning the run from vertical to horizontal so the cable clears limited-height chassis instead of bowing against the glass. The right-angle design also takes lateral strain off the motherboard connector itself, which matters for a port you rarely reseat and cannot easily replace. It is a female-to-male passthrough, so installation is plug and play…
SpecPicks Verdict
SpecPicks scored EZDIY-FAB ATX 24-pin 90 Degree Power Connector Adapter 5V 3 Pin ARGB… using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. EZDIY-FAB's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit my motherboard and power supply?
It works with any ATX motherboard and PSU that uses a standard 24-pin main power connection. It is a female-to-male passthrough, so your existing PSU cable plugs into the adapter and the adapter plugs into the board.
Does it actually help in a small case?
That is its main purpose. The 90 degree right-angle design lets you run the 24-pin power cable from vertical to horizontal, which is what makes it work in limited-height chassis where a straight cable would press against the panel.
What do I need to plug the lighting into?
The ARGB lighting uses a 5V 3-pin addressable header. Your motherboard needs a free 5V 3-pin ARGB header for the rainbow effect to run; the power passthrough itself works regardless.
Does it reduce stress on the motherboard connector?
Yes. EZDIY-FAB states the right-angle design avoids putting pressure on the motherboard connector from the PSU cable, which is intended to support long-term stable use rather than a cable constantly pulling sideways on the header.
Is installation complicated?
No. It is plug and play: disconnect the 24-pin from the board, connect it to the adapter, then seat the adapter in the motherboard header. The only extra step is routing the ARGB lead to a 5V 3-pin header.
Key Features
- The ATX 24 Pin 90° Adapter is compatible with all ATX motherboards and power supply units that support a standard 24 pin main power connection.
- Built with the advanced ARGB lighting system , it features ARGB Rainbow color that glows attractively without straining your eyes .
- 90 Degrees right angle design, connecting between PSU 24 Pin Cable and motherboard connector, does not cause pressure on the motherboard connector for long-term stable use.
- ATX 24-pin female to male connector 90 degrees suitable for motherboard .Plug and play installation.
- This design will solve the PSU installation for the limited height chassis You can install the 24PIN power cable from vertical to horizontal direction with this adapter.
Full Specifications
| Brand | EZDIY-FAB |
|---|---|
| Color | White |
| Unit Count | 1 Count |
| Model Number | EZDPI161-4 |
| Input Voltage | 5 volts |
| Connector Type | atx |
| Mfr Part Number | CA-white-24Pin ARGB Adapter |
| Number of Items | 1 |
| Number of Ports | 24 |
| Compatible Devices | Computer Motherboard |
Ready to buy?
EZDIY-FAB ATX 24-pin 90 Degree Power Connector Adapter 5V 3 Pin ARGB Rainbow Female to Male Power Adapter for Computer Motherboard ATX Power Supply- White-1 Pack is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- vLLM on an RTX 3060 12GB: Is It Worth It for Single-User Chat?
- Ryzen 7 5700X vs 5800X for 1080p & 1440p Gaming in 2026
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Best First Upgrades for a Prebuilt Gaming PC in 2026
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- How to run Llama 3.1 70B on Apple M4 Max
- VibeThinker-3B: A 3B Reasoning Model That Fits Any 12GB GPU
- Ryzen 5600G vs 5700X vs 5800X: Best CPU for a 1080p Gaming Build (2026)
- How to run Qwen 3 32B on Apple M4 Pro
- Microsoft MAI-Image-2.5 Lands #2 on the Image Arena — The Local Angle
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Anker's Thus Chip Claims 150x AI Boost: No Benchmarks Yet
- Forza Horizon 6 PC Benchmarks: What GPU Hits 60 FPS at 1440p?
- Period-Correct 2002 LAN Party Build Around an Athlon XP and GeForce 4 Ti
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- NVFP4 on RTX 50-Series: What llama.cpp's Native FP4 Support Means for Local Inference
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- AMD Ryzen 7 5800X3D Re-Review: Maxing Out DDR4 Gaming in 2026
- How to run Qwen 3 32B on Apple M3 Ultra
- Intel Arc Pro B70 vs RTX 3060 12GB for Local LLMs
- Best 27-inch 1440p Monitor for Ryzen 7 5800X Esports Builds (2026)
- Best CPU Cooler for Ryzen 7 5800X Overclocking (2026)
- Run Local LLMs on a Ryzen 5 5600G With No GPU (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090