Skip to main content
Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit, Male to Female, Female to Male, Compatible for Arduino and Raspberry Pi
Aypzuke

Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit

Bottom line: The Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit ($11.99 on Amazon as of 2026-10-21 22:16 UTC): 240 wires total: 80 each of male-female, male-male and female-female; main trade-off: no longer lengths for wiring across a big project enclosure.

$11.99

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $11.99 Compare to similar single-board computers

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 240 wires total: 80 each of male-female, male-male and female-female
  • ✓ 10cm and 20cm lengths cover both short breadboard hops and longer reaches
  • ✓ 10 wire colors make power, ground and signal lines easy to trace
  • ✓ 40-pin ribbons peel apart into single wires or stay bundled for GPIO headers
  • ✓ Solderless Dupont ends plug onto standard Arduino and Raspberry Pi headers

Cons

  • ✗ No longer lengths for wiring across a big project enclosure
  • ✗ Ribbon strips can fray at the split point if you peel them carelessly
  • ✗ No storage case or organizer listed for keeping lengths sorted
  • ✗ Wire gauge and current rating are not listed in the product details

Manufacturer description

The Aypzuke 240pcs breadboard jumper wire kit gives you every connector type you need to wire up an Arduino or Raspberry Pi project without picking up a soldering iron. The kit includes six 40-pin ribbon cables: two male-to-female, two male-to-male and two female-to-female. That covers breadboard-to-board, breadboard-to-breadboard and header-to-module connections. Wires come in 10cm and 20cm lengths, so you can keep short runs tidy on the breadboard and still reach sensors or displays mounted further away. Each ribbon is color-coded across 10 colors, which makes it easier to trace signal…

SpecPicks Verdict

SpecPicks scored Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Aypzuke's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many of each jumper wire type are in the Aypzuke kit?

The kit has six 40-pin ribbons: two male-to-female, two male-to-male and two female-to-female. That makes 80 wires of each type and 240 in total.

What lengths do the wires come in?

The kit includes 10cm and 20cm wires. Short wires keep breadboard layouts tidy, and the 20cm wires reach modules or sensors placed further from the board.

Will these jumper wires work with Raspberry Pi GPIO pins?

Yes. The kit is listed as compatible with Raspberry Pi and Arduino. Female-ended wires fit onto the GPIO header pins, and male ends push into a breadboard.

Do I need to solder anything to use these wires?

No. Both ends have small pins or sockets that plug straight in, so you can build and change test circuits without soldering.

What is the wire insulation made of?

The insulation is PVC, which the manufacturer describes as flame retardant and heat resistant. Gauge and current rating aren't listed, so check the product listing before using the wires for higher-current loads.

Key Features

  • Package included 2X 40pin male to female breadboard jumper wires, 2X 40pin male to male breadboard jumper wires, 2x40pin female to female breadboard jumper wires
  • The breadboard jumper wires 40 PIN ribbon cable, easy to identify each wires in your DIY or prototype;Fast circuit tests without soldering. Comes with 10 colors to easily distinguish chart connections.
  • The Jumper wire PVC material; insulated and flame retardant, high temperature resistant wire; safe and durable; small pins and sockets at both ends of the wire, no need to solder, plug and play, easy to connect when conducting circuit experiments
  • The Jumper cable can be used for connection during circuit experiments and also for pin extensions of the experimental board for additional experimental projects. Very secure connection to the pins, no soldering required, also for fast circuit testing
  • If you have any questions, please feel free to contact us

Full Specifications

UPC757611972249
ASINB0BTT48V7P
BrandAypzuke
ColorMulticolored
Strands10
MaterialCopper
Brand NameAypzuke
ManufacturerAypzuke
Material TypeCopper
Included ComponentsCD
Warranty Description3
Number of Cable Strands10
Full listing titleAypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit, Male to Female, Female to Male, Compatible for Arduino and Raspberry Pi

Ready to buy?

Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit, Male to Female, Female to Male, Compatible for Arduino and Raspberry Pi is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $11.99

*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.

Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires… head-to-head

Side-by-side specs, prices, and a pick for each matchup — no tab-switching.

Build your own comparison →

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Aypzuke 10cm+20cm 240pcs Breadboard Jumper Wires Cable Kit, Male to Female, Female to Male, Compatible for Arduino and Raspberry Pi
$11.99
View on Amazon →