airgoo Addressable RGB ATX Strimer
Bottom line: The airgoo Addressable RGB ATX Strimer: 126 individually addressable LEDs across the 24-pin run, denser than typical 60-LED strimers; main trade-off: 126 LEDs exceed the 120-LED cap on most 3-pin motherboard headers.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 126 individually addressable LEDs across the 24-pin run, denser than typical 60-LED strimers
- ✓ High-diffusion white silicone tube softens hotspots into an even glow
- ✓ 18AWG double-layer wire construction, electrically tested for stable PSU delivery
- ✓ Standard +5V 3-pin ARGB connector works with motherboard headers and SignalRGB
Cons
- ✗ 126 LEDs exceed the 120-LED cap on most 3-pin motherboard headers
- ✗ AG-DRGB16 or Corsair Commander Core XT controller sold separately for full per-LED control
- ✗ Silicone tube attracts dust easily and shows it against the white finish
- ✗ Strictly +5V only, so no 12V RGB header compatibility
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for airgoo Addressable RGB ATX Strimer, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the rgb & lighting category before committing. On the listing's own facts, the case for it is "126 individually addressable LEDs across the 24-pin run, denser than typical 60-LED strimers"; the main trade-off is "126 LEDs exceed the 120-LED cap on most 3-pin motherboard headers". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- ✅ IMPORTANT: This Strimer has 126 LEDs total. Currently, the 3-pin argb header on most motherboards can only support up to 120 LEDs. For a better uer experience, it is recommended to use it with Corsair Commander Core XT or Airgoo 16-port SignalRGB controller AG-DRGB16, controller needs to be purchased separately.
- ✅ One Addressable RGB Power Extension Cable: Each cable come with white silicon rubber tube, overall dimension is 8.07 x 1.97 x 0.32 inches. Using environmentally friendly silicon rubber, no smell, soft, flexible, light diffusing helpful, but easily coated with dust, please note it.
- ✅ Using built-in ic led lamp beads: Total 126 leds, control with argb 3-pin connector (+5V, DATA, GND), each led lamp bead can be individually controlled via specialized Airgoo AG-DRGB16 Signal RGB controller or motherboard's argb 3-pin header. Working voltage is +5V, cannot use other voltages for power supply, please note it.
- ✅ Perfectly works with AG-DRGB16 Controller: Recommend to purchase our AG-DRGB16 Controller (Not Included) separately, compatible with SignalRGB, 16-Port independent channel for complex layered lighting setups, eliminating motherboard header limits and unifying multi-brand lighting setups effortlessly.
- ✅ Certified Safety: The Power Cable has Double-layer design with 18AWG wire, pass electrical test, maintain the stability of the power supply.
- ✅ PACKAGE INCLUDES: 1 x Addressable RGB ATX 24-Pin Power Extension Cable.
Full Specifications
| Brand | airgoo |
|---|---|
| Color | ARGB ATX 24Pin |
| Gauge | 18 |
| Model | AG-PSUL-120-01 |
| Wattage | 300 watts |
| Cable Type | 24 Pin ATX Extension Cable |
| Dimensions | 8.07 x 1.97 x 0.32 inch |
| Item Shape | Round |
| Model Name | argb |
| Unit Count | 1 Count |
| Item Length | 20 inches |
| Part Number | AG-PSUL-120-01 |
| Connector Type | 24 Pin |
| Number of Pins | 24 |
| Outer Material | Silicone |
| Maximum Current | 10 A |
| Maximum Voltage | 24 volts |
| Number of Items | 1 |
| Special Feature | Addressable RGB Power Extension Cable with LED Diffused Soft Silicone Tube |
| Connector Gender | Male-to-Female |
| Full listing title | airgoo Addressable RGB ATX Strimer, ARGB PSU Extension Cable | 126 High-Density LEDs with High-Diffusion Silicone Tube, 18AWG Wires and ATX 24-pin Connectors for Motherboards |
Ready to buy?
airgoo Addressable RGB ATX Strimer, ARGB PSU Extension Cable | 126 High-Density LEDs with High-Diffusion Silicone Tube, 18AWG Wires and ATX 24-pin Connectors for Motherboards is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related RGB & Lighting
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best Plug-and-Play Retro Game Console in 2026
- Build a Raspberry Pi 4 Pi-hole + Unbound Ad-Blocker in 2026
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- Build a Silent Pi 4 NVMe Homelab: Cooling, VESA, SSD Boot
- Coreboot + AMD openSIL: Windows 11 Works on MSI Ryzen
- Budget Ollama Build Under $500: What Actually Runs in 2026
- Bilingual Voice Agents: Frontier ASR on Code-Switched Speech
- Best Standing Desk for a Dual-Monitor AI Workstation in 2026
- Best Parts for a Local Speech and Vision AI Box in 2026
- Ryzen 7 5800X3D vs 5800X for 1080p Competitive Gaming: Which Wins?
- Best SSD and Controller Pairing for a Living-Room Gaming PC
- Best USB Microphone for Streaming in 2026: HyperX QuadCast 2 vs Blue Yeti
- Build a Self-Hosted Security Camera on a Raspberry Pi 4 8GB in 2026
- Open WebUI on a Raspberry Pi 4, Inference on an RTX 3060: The Split-Brain Home LLM Stack
- Best Budget SSDs for Homelab and Proxmox Boot Drives in 2026
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- Which GPU Runs Which LLM in 2026: The RTX 3060 12GB Model-Fit Matrix
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5080
- VRAM calculator: what can you actually run on your GPU?
- Build a Jellyfin Media Server on a Raspberry Pi 4 8GB in 2026
- Best Budget 4K Monitor for an RTX 3060 Build in 2026: SANSUI vs KOORUI vs ASUS TUF
- Is the RTX 3060 12GB Still a Good 1080p Gaming GPU in 2026?
- Best CPU Cooler for a Ryzen 5800X Under PBO + Manual Overclock in 2026
- Best Controller for Raspberry Pi Retro Emulation in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090