XRDS -RF 100W PL259 UHF Male RF Dummy Load for Ham Radio, 50 Ohm Dummy Load
Bottom line: The XRDS -RF 100W PL259 UHF Male RF Dummy Load for Ham Radio: 100W rating covers bench testing for most amateur radio transceivers; main trade-off: 100W ceiling rules out testing linear amplifiers or higher-power output.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 100W rating covers bench testing for most amateur radio transceivers
- ✓ Wide DC-520 MHz range spans HF, VHF and the 70 cm UHF band
- ✓ VSWR of 1.2 or lower gives a close 50 ohm match
- ✓ PL259 male plug threads straight onto the rig's SO-239 jack, no adapter
- ✓ Nickel-plated copper shell with a silver-plated copper center pin
Cons
- ✗ 100W ceiling rules out testing linear amplifiers or higher-power output
- ✗ PL259 only, so N-type, BNC or SMA radios need a separate adapter
- ✗ Air-cooled design, and the listing gives no duty cycle or max key-down time
- ✗ Tops out at 520 MHz, so it can't test the 900 MHz or 1.2 GHz bands
Manufacturer description
XRDS -RF 100W PL259 UHF Male RF Dummy Load
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for XRDS -RF 100W PL259 UHF Male RF Dummy Load for Ham Radio, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "100W rating covers bench testing for most amateur radio transceivers"; the main trade-off is "100W ceiling rules out testing linear amplifiers or higher-power output". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 100W PL259 UHF Male Plug DC-520 MHz dummy load
- Connector Type: PL259 Male. Impedance: 50ohm
- Adapter Material: The outer shell is nickel plated copper, and the inner needle is silver plated copper
- Frequency Range: DC to 520MHz. VSWR:≤ 1.2
- The 100-Watt PL259 Dummy Load is a self-contained air-cooled resistive unit that easily attaches to the male PL259 antenna connector on the back of the Amateur Radio rig.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Model | 614164800071 |
| Frequency | 520 MHz |
| Cable Type | Coaxial |
| Unit Count | 1.0 Count |
| Connector Type | Pl259 |
| Number of Pins | 1 |
| Frequency Range | DC to 520MHz. VSWR:≤ 1.2 |
| Maximum Voltage | 50 Volts |
| Special Feature | Self-Contained Air-Cooled Resistive Unit |
| Adapter Material | The outer shell is nickel plated copper, and the inner needle is silver plated copper |
| Connector Gender | Male-to-Male |
| Compatible Devices | Amateur Radio Rig |
| Indoor Outdoor Usage | Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | Ham Radio Testing and Tuning |
| Other Special Features of the Product | Self-Contained Air-Cooled Resistive Unit |
Ready to buy?
XRDS -RF 100W PL259 UHF Male RF Dummy Load for Ham Radio, 50 Ohm Dummy Load is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- AMD Challenges Nvidia DGX Spark with $3,999 Ryzen AI Halo
- Build a Raspberry Pi 4 NAS With an SSD in 2026
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- Best PC Gaming Controller in 2026: GameSir G7 SE vs DualSense vs 8BitDo Pro 2
- HyperX QuadCast 2 S vs Blue Yeti for Streamers: Which USB Mic Wins in 2026?
- Best Raspberry Pi 5 Alternatives in 2025
- Asus ROG Harpe II Extreme: A 24K-Gold, 65K-Sensor Gaming Mouse
- BIOS Says Resize BAR Is On But Nvidia Disagrees
- Noctua NH-U12S vs DeepCool AK620 for the Ryzen 7 5800X
- Building a Period-Correct Windows 98 SE Gaming PC in 2026
- Anthropic Tightens Claude Fable 5 Limits — Why Builders Are Eyeing Local Rigs
- Crucial BX500 vs Samsung 870 EVO: Best SATA SSD for Game Loads
- Raspberry Pi OS Moves to Linux 6.18 LTS — Real Performance Gains
- RTX 4090 AIO Kit 2025: Pricing, Cooling & Buying Guide
- Best Capture Device for Recording Retro Consoles and Old PCs in 2026
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- Jetson Orin Nano Super vs Hailo-8 AI HAT+: Which Edge-AI Path Is Right for You?
- Strix Halo Gaming Benchmarks: What AMD's APU Can Really Do
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for Streaming in 2026
- NVIDIA GeForce GTX 10 Pascal GPUs: 10th Anniversary
- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Raspberry Pi 4 8GB vs Ryzen 5 5600G: Which Homelab Box Wins in 2026?
- Jan.ai vs LM Studio vs Ollama: Easiest Local-LLM App for a 12GB Card in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090