Skip to main content
PCIe SATA Card 6 Ports With 6 Cables and Low Profile Bracket, 6 Gbps PCIe Card, Support 6 SATA 3.0 Devices (ASM1166 Chip)
MZHOU

MZHOU PCIe SATA Card 6 Ports With 6 Cables and Low Profile Bracket

Bottom line: The MZHOU PCIe SATA Card 6 Ports With 6 Cables and Low Profile Bracket: Adds six SATA 3.0 ports, each rated up to 6 Gbps; main trade-off: windows 11 and macOS are not on the listed support list.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Adds six SATA 3.0 ports, each rated up to 6 Gbps
  • ✓ ASM1166 controller chip
  • ✓ No drivers needed on Windows XP/7/8/10 or Linux
  • ✓ Includes six SATA cables plus a low-profile bracket
  • ✓ Fits PCIe x1, x4, x8 and x16 slots; supports hot swap

Cons

  • ✗ Windows 11 and macOS are not on the listed support list
  • ✗ Booting from attached drives is not stated in the listing
  • ✗ Drives still need SATA power leads from your PSU
  • ✗ All six drives share one card's PCIe link, so heavy use can cap throughput

Manufacturer description

Out of SATA ports? The MZHOU PCIe SATA card adds six SATA 3.0 ports to your desktop through a single expansion slot. It runs on the ASM1166 controller chip, and each port is rated at up to 6 Gbps, so you can connect hard drives, SSDs or optical drives without giving up the ports already on your motherboard. Setup is simple. The card needs no drivers on Windows XP, 7, 8 and 10 or on Linux. It also supports hot swap, so you can change drives in a compatible bay without shutting down. The card fits PCIe x1, x4, x8 and x16 slots, so even a spare x1 slot on an older board will take it. Six SATA…

SpecPicks Verdict

SpecPicks scored MZHOU PCIe SATA Card 6 Ports With 6 Cables and Low Profile Bracket using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. MZHOU's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many drives can I connect to the MZHOU PCIe SATA card?

Up to six SATA 3.0 devices at the same time, one per port. Six SATA cables are included, so you can fill every port without buying extra cables.

Do I need to install drivers for this ASM1166 SATA card?

No. The listing says no drivers are required on supported systems: Windows XP, 7, 8, 10 and Linux.

Will it fit in a PCIe x1 slot or a small-form-factor case?

Yes. It works in PCIe x1, x4, x8 and x16 slots. A low-profile bracket is included for slim and small-form-factor cases.

Does the card support hot swapping drives?

Yes. The listing says it supports hot swap, so you can add or remove SATA drives without powering down, as long as your drive bay or enclosure also supports hot swap.

Will it work in an older Windows XP retro PC build?

Windows XP is on the supported list, and the card fits any PCIe x1 or wider slot. Your motherboard needs a PCIe slot, though; boards that only have PCI or AGP slots can't use it.

Key Features

  • The PCIe SATA card allows you to add six 6 Gbps SATA 3.0 devices to your computer (no drivers required).Support hot swap.
  • The transmission speed can reach up to 6.0 Gbps/sThis PCIe SATA card contains six SATA cables to simplify the connection!
  • Connect 6 mass storage devices simultaneously. Use ASM1166 chip to improve the stability and compatibility of the card.
  • Support system: Windows XP / 7/8/10 / Linux. Support interface: PCI-E 1X 4X 8X 16X.
  • MZHOU is committed to providing high-quality product quality and sales services, please feel free to contact us if you have any questions, we will reply to you within 12 hours.

Full Specifications

BrandMZHOU
StyleClassic
Style NameClassic
Model NumberMZHOU Tarjeta PCIe SATA de 6 Puertos
CompatibilityLinux
Support systemWindows XP / 7/8/10 / Linux. Support interface: PCI-E 1X 4X 8X 16X.
Mfr Part NumberMZHOU Tarjeta PCIe SATA de 6 Puertos
Compatible DevicesDesktop
Hardware InterfacePCIE x 1
Warranty Description1 year warranty
Full listing titlePCIe SATA Card 6 Ports With 6 Cables and Low Profile Bracket, 6 Gbps PCIe Card, Support 6 SATA 3.0 Devices (ASM1166 Chip)

Ready to buy?

PCIe SATA Card 6 Ports With 6 Cables and Low Profile Bracket, 6 Gbps PCIe Card, Support 6 SATA 3.0 Devices (ASM1166 Chip) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Expansion Cards

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →