GLOTRENDS
GLOTRENDS 150mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs
Bottom line: The GLOTRENDS 150mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs: Full PCIe 3.0 x16 link with 16GB/s peak bandwidth; main trade-off: PCIe 4.0 GPUs need the slot set to Gen 3 in BIOS or may blue-screen.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Full PCIe 3.0 x16 link with 16GB/s peak bandwidth
- ✓ No driver install needed: plug in and boot
- ✓ Listed for RTX 20, GTX 16/10, RX 5000, Radeon VII, Vega and R9 Fury cards
- ✓ Ships in an anti-static bag to protect the contacts
- ✓ Lifetime tech support with a troubleshooting manual and help choosing a length
Cons
- ✗ PCIe 4.0 GPUs need the slot set to Gen 3 in BIOS or may blue-screen
- ✗ PCIe 3.0 only, so newer Gen 4/Gen 5 cards lose bandwidth
- ✗ 150mm length may not reach some vertical mounts; measure first
- ✗ No hot swapping; power down before connecting or removing
Manufacturer description
The GLOTRENDS 150mm PCIe 3.0 x16 riser cable lets you mount a graphics card away from the motherboard slot. That makes it useful for vertical GPU mounts, small-form-factor builds, and test benches where a card can't sit directly in the board. It runs at the full PCIe 3.0 x16 link, with a peak of 16GB/s. GLOTRENDS lists compatibility with PCIe 3.0 GPUs, including the GeForce RTX 20, GTX 16 and GTX 10 series and AMD's Radeon RX 5000, Radeon VII, RX Vega and R9 Fury series. You don't need to install a driver. Seat the cable, connect the card and boot. Hot swapping is not supported, so power the…
SpecPicks Verdict
SpecPicks scored GLOTRENDS 150mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. GLOTRENDS's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this riser cable work with my PCIe 4.0 graphics card?
It can, but GLOTRENDS warns that PCIe 4.0 GPUs may lose performance or blue-screen. To avoid this, set the PCIe slot to PCIe 3.0 manually in your motherboard BIOS before you use the cable.
Which graphics cards is the GLOTRENDS 150mm riser compatible with?
GLOTRENDS lists PCIe 3.0 GPUs such as the GeForce RTX 20, GTX 16 and GTX 10 series and AMD Radeon RX 5000, Radeon VII, RX Vega and R9 Fury series.
What bandwidth does this riser support?
It is a PCIe 3.0 x16 cable with a rated peak of 16GB/s, the full bandwidth of a PCIe 3.0 x16 slot.
Do I need to install drivers to use the riser cable?
No. The cable needs no driver. Hot swapping is not supported, so shut down and unplug your PC before you connect or disconnect it.
How do I know if 150mm is the right length for my build?
Measure the distance from your motherboard's x16 slot to where the GPU will be mounted. GLOTRENDS' lifetime tech support can also send guidance on choosing a riser length and on GPU and motherboard compatibility.
Key Features
- PCIE 3.0 x16 Riser Cable – Unleash 16GB/s Peak Speed. No driver installation required (hot swapping not supported).
- Fully compatible with low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc
- For PCIe 4.0 GPUs, the performance will be degraded or blue screen may occur, please manually set the PCIE slot in the BIOS to PCIE 3.0.
- Packaged in an anti-static bag, try not to touch the gold finger before use, as handprints or stains will affect signal performance.
- Get lifetime tech support - contact us for troubleshooting manual, including GPU, motherboard compatibility issues, how to choose PCIE riser cable length, and more.
Full Specifications
| Brand | GLOTRENDS |
|---|---|
| Model | PCIE30-X16-150MM-0090D |
| Cable Type | PCIE 3.0 X16 Riser Cable |
| Item Shape | Flat |
| Unit Count | 1 Count |
| Item Length | 15 centimeters |
| Part Number | PCIE30-X16-150MM-0090D |
| Connector Type | Female: 90 Degree Angle, Male: 0 Degree Angle |
| Number of Pins | 16 |
| Number of Items | 1 |
| Special Feature | 150mm Length, 90 Degree Right Angle |
| Connector Gender | Male-to-Female |
| Compatible Devices | AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, GeForce RTX 20/GTX 16/GTX 10 Series |
| Data Transfer Rate | 16 gigabytes_per_second |
| Included Components | PCIE 3.0 Riser Cable |
| Indoor Outdoor Usage | Indoor |
| Compatible Phone Models | No Compatible Phone Models |
| Ethernet Cable Category | Cat 6 |
| Recommended Uses For Product | PCIe 3.0 GPU |
| Other Special Features of the Product | 150mm Length, 90 Degree Right Angle |
| Full listing title | GLOTRENDS 150mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc |
Ready to buy?
GLOTRENDS 150mm PCIe 3.0 X16 Riser Cable for Low-end PCIe 3.0 GPUs, Such as GeForce RTX 20/GTX 16/GTX 10 Series and AMD Radeon RX5000/VII/RX Vega/R9 Fury Series, etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- SteamOS Boots on Intel Hardware: Enthusiast Hack Breaks AMD Lock-In
- Samsung 256GB microSD Drops to $47.99 — 40% Off Storage Deal
- Best Wireless Productivity Keyboards Under $50 in 2026
- 1440p 165Hz vs 4K 60Hz: ASUS TUF VG27 vs SANSUI 27" for Gaming
- Ryzen 7 5800X vs 5700X for 1080p High-Refresh Gaming
- Best Gaming Mouse Pad for FPS Esports (2026)
- Best AMD Ryzen CPU for Gaming in 2026: 5 Picks Compared
- Qwen 3.6 27B vs Mistral 3.5 Medium: Local Hardware Showdown for 24GB GPUs
- Free Retro Game Emulator Online: 2026 Browser Guide
- VibeThinker-3B: A 3B Reasoning Model That Fits Any 12GB GPU
- Best Gaming SSD for PC Builds in 2026: 5 Picks Tested
- One Desk, Two Sims: Swapping a G29 Wheel and an Extreme 3D Pro Stick
- Best SSDs and Adapters for Retro PC Builds in 2026
- ASUS ROG Crosshair 2006 X870E: A Retro-Styled AM5 Mobo for ROG's 20th Anniversary
- Grok 4.3 vs GPT-5 vs Claude 4.7: Local Hardware Implications of the Closed-Model Intelligence Index
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- Best 12GB GPU for Local LLMs in 2026
- Local Whisper for Stream VODs: What Mic and GPU You Actually Need
- Claude Opus 4.8 Tops the Intelligence Index: Cloud vs Local on a 3060
- Best Wired Controller for Fighting Games on PC (2026)
- Best Controllers for Retro Gaming and Emulation in 2026
- Best Wireless Controller for PC Gaming in 2026
- Best Storage and IDE Adapters for Retro PC Builds in 2026
- Best Controller for Steam Deck Docked Mode in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090