QuliMetal
Genesis ii Flavorizer Bars Heat Deflector Replacement Parts, 66795 66685
Bottom line: The QuliMetal Genesis ii Flavorizer Bars Heat Deflector Replacement Parts: Solid SUS304 stainless steel with no porcelain coating to chip or peel; main trade-off: only fits 2017+ Genesis II 300 series; not for 200 or 400 series grills.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Solid SUS304 stainless steel with no porcelain coating to chip or peel
- ✓ Complete kit: 5 flavorizer bars plus 3 heat deflectors in one set
- ✓ Replaces Weber part numbers 66795, 66032, 66685 and 66040
- ✓ Fits more than 20 Genesis II and Genesis II LX 300-series models, 2017 and newer
Cons
- ✗ Only fits 2017+ Genesis II 300 series; not for 200 or 400 series grills
- ✗ Third-party part, not made by Weber
- ✗ Warranty terms are not stated on the listing
- ✗ You must measure your old parts first to confirm size and model
Manufacturer description
Worn-out flavorizer bars cause flare-ups and uneven heat. The QuliMetal Genesis II Flavorizer Bars and Heat Deflector set replaces them in 2017-and-newer Weber Genesis II 300-series grills with solid SUS304 stainless steel instead of porcelain coating. Because there is no coating, there is nothing to chip or peel. You get 5 flavorizer bars, each 17 1/8 x 3 x 2 1/8 inches, and 3 heat deflectors, each 12 1/2 x 4 1/4 inches. The set replaces Weber part numbers 66795, 66032, 66685 and 66040. It fits a long list of Genesis II models, including the E-310, S-310, SE-310, E-315, E-325, E-330, S-335…
SpecPicks Verdict
SpecPicks scored QuliMetal Genesis ii Flavorizer Bars Heat Deflector Replacement Parts using a rating × review-volume × price-fit model applied to published specs and reviews across the retro consoles category. QuliMetal's retro consoles lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro consoles of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will these flavorizer bars fit my Weber Genesis II E-310?
Yes. The listing names the Genesis II E-310, along with the S-310, SE-310, E-315, E-325, E-330, E-335, S-345 and other 300-series models made in 2017 or later.
What size are the flavorizer bars and heat deflectors?
Each flavorizer bar is 17 1/8 x 3 x 2 1/8 inches (L x W x H). Each heat deflector is 12 1/2 x 4 1/4 inches. Compare these sizes with your original parts before you order.
Which Weber part numbers does this set replace?
It replaces Weber part numbers 66795, 66032, 66685 and 66040, which are Genesis II (GS4) 300-series flavorizer bars and heat deflectors.
How many pieces come in the QuliMetal set?
8 pieces: 5 SUS304 stainless steel flavorizer bars and 3 SUS304 stainless steel heat deflectors.
Are stainless steel flavorizer bars better than Weber's porcelain bars?
These are solid 304 stainless steel with no coating, so nothing can chip or peel off the way porcelain coating can. For warranty details, check the current product listing.
Key Features
- 🔥【Premium Non-Magnetic SUS304 Stainless Steel】Crafted from heavy-duty 304 stainless steel, these flavorizer bars and heat deflectors are non-magnetic and designed for excellent resistance to corrosion and heat. A dependable upgrade for your Weber Genesis II Flavorizer Bars and Genesis II Heat Deflector
- 🔥【Dimensions】Each bar measures 17 1/8" x 3" x 2 1/8”(L x W x H). Each heat deflector measures 12.5 X 4.25 inches / 12-1/2" x 4-1/4" (L x W). 🔥【Package】Set of 5 304 stainless steel heat plates and 3 Pcs 304 stainless steel heat deflectors. Please kindly compare with the SIZE and MODEL of your original parts before you order
- 🔥【Fits Weber Genesis II 300 Series Grills】These genesis ii Flavorizer Bars and genesis ii heat deflectors for Weber Genesis ii E-310, Genesis ii S-310, Genesis ii SE-310, Genesis ii E-315, Genesis ii E-325, Genesis ii E-330, Genesis ii SE-330, Genesis ii CE-330, Genesis ii S-335, Genesis ii SE-335, Genesis ii E-335, Genesis ii S-345(2017 and newer). Replace for weber part #66032, 66795 Flavorizer Bars
- 🔥【Fits Weber Genesis II LX 300 Series Grills】The genesis ii e-310 parts for Weber Genesis ii LX S-340, Weber Genesis ii LX E-340, Weber Genesis ii CSE-315, Weber Genesis ii CSS-315, Weber Genesis ii CSS-335, Weber Genesis ii CSE-335, Weber Genesis ii LX CSS-340, Weber Genesis ii LX CSE-340(2017 and newer). Replace for Weber grill accessories GS4 Parts 66795 66032 66685 66040
- 🔥【A Reliable Alternative to Porcelain Bars】Unlike porcelain-coated bars that may chip and corrode over time, these solid SUS304 stainless steel flavorizer bars offer long-lasting performance without the worry of coatings peeling off. A smart choice for enhancing the durability of your grill and replacing worn-out Weber Genesis 2 Grill Parts
Full Specifications
| Size | H4 17.1" 304 |
|---|---|
| Brand | QuliMetal |
| Color | 304 Stainless Steel |
| Model | 66032SUS+66040SUS |
| UnitCount | 30 |
| Manufacturer | QuliMetal |
| ItemPartNumber | 66032SUS+66040SUS |
Ready to buy?
Genesis ii Flavorizer Bars Heat Deflector Replacement Parts, 66795 66685 is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Consoles
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Gaming CPUs for 1080p in 2026
- Ideogram 4.0 Open Weights on an RTX 3060 12GB: Local Text-to-Image in 2026
- Razer Soma Chroma Gaming Chair Review: RGB vs. Adjustability
- Ryzen 7 5800X3D vs 5800X: Does 3D V-Cache Beat Raw Clocks for Gaming?
- Build a Home Assistant Smart-Home Hub on a Raspberry Pi 4 8GB in 2026
- What Fits in 12GB VRAM? RTX 3060 Local LLM Model Guide (2026)
- Intel Arc LLM Performance: A770, B580 & Pro B60 Guide 2025
- Build a Raspberry Pi 4 8GB NAS with SATA SSDs in 2026
- Noctua NH-U12S vs CoolerMaster ML240L: Air or AIO for 5800X
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- Period-Correct Sound for a Modern Retro PC: The Sound Blaster G6 and the EAX Legacy
- Best SATA SSDs for Older PCs and Retro Builds in 2026
- Run Home Assistant on a Raspberry Pi 4 8GB in 2026 (SSD Boot)
- Why Preassembled PCs Beat DIY Builds in 2026
- LiteLLM as a Fallback Router: Keep Working When Limits Hit
- Best SATA SSD to Upgrade Your PS4 Pro Storage in 2026
- MSI Raider 16 Max HX Review: Elite Gaming and Creator Power
- 48GB DDR5 or 12GB VRAM? What Actually Speeds Up Local LLMs
- Raspberry Pi Projects for Beginners: 6 No-Solder Builds
- Best Budget Gaming PC Build 2026: AMD Parts Guide
- Ling 2.6 1T on Local Hardware: Can You Actually Run a Trillion-Parameter Model at Home in 2026?
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090