FIFINE
FIFINE Dynamic Microphone and Low Profile Arm Stand Set
Bottom line: The FIFINE Dynamic Microphone and Low Profile Arm Stand Set ($90.98 on Amazon as of 2026-10-06): XLR and USB outputs in one mic: plug into a PC now, move to a mixer or interface later; main trade-off: XLR cable not included; buy one separately to use the XLR output.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ XLR and USB outputs in one mic: plug into a PC now, move to a mixer or interface later
- ✓ Cardioid dynamic capsule helps reject PC fan and hard-drive noise
- ✓ Low-profile all-metal arm holds up to 1.5kg/3.3lbs and extends to 29 inches
- ✓ Tap-to-mute panel and gain knob on the mic body for quick level changes
- ✓ 3.5mm headphone jack with volume control for real-time monitoring over USB
Cons
- ✗ XLR cable not included; buy one separately to use the XLR output
- ✗ Mute, gain knob, and headphone monitoring work only over USB, not XLR
- ✗ XLR use requires a separate audio interface or mixer
- ✗ Cardioid pickup favors one speaker; not ideal for multi-person table podcasts
SpecPicks Verdict
SpecPicks scored FIFINE Dynamic Microphone and Low Profile Arm Stand Set using a rating × review-volume × price-fit model applied to published specs and reviews across the streaming gear category. FIFINE's streaming gear lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for streaming gear of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- XLR/USB Dual Output-Provided with both USB and XLR connections, the USB dynamic microphone pack for PC is a significant benefit for you to podcast in various ways. XLR interface enhances the sense of audio space for immersive podcast audio. Use the vocal microphone with sound card or mixer equipment accessories in your studio to present more natural and high-end audio. (XLR Cable NOT Included)
- Sound Quality Upgraded-XLR dynamic microphone boom arm kit for podcast will not distort the audio from vocal, video or music recording, to keep its originality. Quite directional cardioid pattern deals with background noise, like hard drives or computer fans. The studio recording microphone arm stand set delivers originally detail voice without much additional noise processing.
- Low Profile and Sturdy Metal-The arm stand can extend from the bottom of your computer screen. The mic stand saves more space in a unobstructing view. The support capacity of the all metal microphone arm stand can reach 1.5kg/3.3lbs, providing stability for your podcast microphone.
- Versatile Function Keys-Tap-to-mute on the USB mic front panel is handy to mute instead of pushing a button. Control the recording audio volume by gain knob on the studio mic for PC, to output more vivid broadcast audio.The podcast mic ability to 3.5mm jack real-time monitoring along with headphone volume control are added bonuses to record. (Only available for USB connection)
- Cable Management and Fully Adjustment-The boom stand is equipped with cable managements in hiddenness to organize your microphone cables. Neat arrangement of cable will not cause excessive pulling or resulting in unexpected use. Suspension arm stand can be extended to 29 inches, suitable for your long large office desktop.
Full Specifications
| Brand | FIFINE |
|---|---|
| Color | matte black |
| Weight | 1.5kg |
| Model Name | K688+BM88 |
| Connectivity | USB |
| Power Source | Corded Electric |
| Audible Noise | 75 Decibels |
| Compatibility | PC |
| Polar Pattern | Unidirectional |
| Built-In Media | usb cable |
| Connector Type | USB, XLR |
| Special Feature | Stand |
| Antenna Location | Gaming, Streaming, Podcasting, Voice Recording, Video Recording |
| Audio Sensitivity | 75 Decibels |
| Hardware Platform | Camera, Laptop, PC |
| Compatible Devices | Personal Computer |
| Enclosure Material | Metal |
| Frequency Response | 20 KHz |
| Number of Channels | 1 |
| Included Components | usb cable |
| Full listing title | FIFINE Dynamic Microphone and Low Profile Arm Stand Set, XLR/USB Podcast Recording PC Mic for Vocal Streaming Bundle with Metal Boom Arm, Mute Button, Headphones Jack for Gaming Studio (K688+BM88) |
Ready to buy?
FIFINE Dynamic Microphone and Low Profile Arm Stand Set, XLR/USB Podcast Recording PC Mic for Vocal Streaming Bundle with Metal Boom Arm, Mute Button, Headphones Jack for Gaming Studio (K688+BM88) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Streaming Gear
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi AI HAT+ (26 TOPS): What It Actually Runs in 2026
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 With Free Cooler
- CRT PC Monitors for Retro Gaming: 2026 Buying Guide
- Best Raspberry Pi Setup for Home Assistant in 2026
- Qwen 3.6-27B in Full VRAM on a 5070 Ti: 50K Context at 4.256bpw, Real Numbers
- RTX 5090 AI Cores: What the Specs Actually Mean in 2026
- Sound BlasterX G6 on a Retro PC: Bringing Modern DAC Quality to Pentium III and Athlon XP Builds
- Run Qwen Locally: Apple Silicon vs a 12GB RTX 3060 Rig in 2026
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
- Can a 12GB RTX 3060 Run Gemma 4 31B? Quantization & Tok/s Reality Check
- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- Self-Host Immich on a Ryzen 5 5600G Mini-PC: Power, Storage, Real Throughput
- Aider vs Cline vs Continue.dev on a Local RTX 3060 (2026)
- A LEGO Castle Case for the Raspberry Pi 5 Is Going Viral — Here's the Build
- Building a CompactFlash + IDE Storage Stack for Win98 and WinXP Retro Rigs
- Playing Pokémon on Steam Deck: The Real 2026 Guide
- vLLM vs llama.cpp for Single-User Chat on a 12GB GPU (2026)
- Steam Deck OLED vs ROG Ally Z1 Extreme: 2025 Comparison
- Dual GPU Llama.cpp Speedup: What Actually Helps
- Best Way to Stream a PS4 Pro to PC: Elgato Cam Link 4K Capture Setup
- Open WebUI on a Raspberry Pi 4: A Self-Hosted LLM Front-End That Sips Power
- Crucial BX500 vs Samsung 870 EVO for an Emulation Box
- Best CPU Cooler for AMD Ryzen 7 5800X High-TDP Builds (2026)
- AI-Assisted Driver Hunting on Voodoo3 + GeForce 4 Ti: A 2026 Win98 Workflow
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090