Skip to main content
ELUTENG NVME to USB Adapter USB 3.1 Gen 2 to M.2 NVMe SSD Converter Adapter 10Gbps PCIe Based M Key Hard Drive Reader Max 4TB Support UASP for 2280 2260 2242 2230 SSD (Only for M.2 NVME)
ELUTENG

ELUTENG NVME to USB Adapter USB 3.1 Gen 2 to M.2 NVMe SSD Converter Adapter 10Gbps PCIe Based M Key Hard Drive Reader Max 4TB Support UASP for 2280 2260 2242 2230 SSD (Only for M.2 NVME)

Bottom line: The ELUTENG NVME to USB Adapter USB 3.1 Gen 2 to M.2 NVMe SSD Converter: JMS583 chip hits USB 3.1 Gen 2 10Gbps, ~1000MB/s read; main trade-off: M-Key NVMe only, no B-Key, B&M, SATA, or AHCI drives.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar storage adapters

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ JMS583 chip hits USB 3.1 Gen 2 10Gbps, ~1000MB/s read
  • ✓ UASP + TRIM support cuts CPU load, boosts durability
  • ✓ Fits every M.2 NVMe length: 2230/2242/2260/2280
  • ✓ Copper heat-spreader PCB plus included silicone thermal pad
  • ✓ Tool-free portable kit ships with screws and screwdriver

Cons

  • ✗ M-Key NVMe only, no B-Key, B&M, SATA, or AHCI drives
  • ✗ USB Type-A output, no USB-C cable or Thunderbolt
  • ✗ 10Gbps and 1000MB/s are theoretical, vary by SSD
  • ✗ Cannot read BitLocker or hardware-encrypted drives

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored ELUTENG NVME to USB Adapter USB 3.1 Gen 2 to M.2 NVMe SSD Converter… using a rating × review-volume × price-fit model applied to published specs and reviews across the storage adapters category. ELUTENG's storage adapters lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for storage adapters of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • 【Compatible with M.2 NVME】Eluteng m.2 to usb adapter, it supports M.2 NVME in 2230/2242/2260/2280mm sizes SSD, this nvme usb adapter compatible with M-key(Not for B-Key and B&M-Key). Note: M.2 NGFF, PCI-E AHCI protocol is not supported.
  • 【High Speed & Stability】The m.2 ssd usb adapter external output port is USB3.1 GEN2 USB Type-A. The theoretical transfer speed is 10 Gbps for NVME protocol, with a substantial increase in read speed and a rise in transfer speed for large files; using JMS583 chip with UASP and TRIM functions. Reduced CPU load, lower consumption, faster speed and higher durability.
  • 【4TB large Capacity】This nvme ssd to usb adapter up to 4TB SSD can be installed. backward compatible with USB3.0/USB2.0 interface, read speed: 1000MB/s (This data is for reference only). Compatible with Windows 7/8/10 / Mac OS / Linux systems.
  • 【Heat Dissipation Design】 PCBA board surface is processed with copper rod to prevent abnormal heat generation of the SSD. Heat dissipating silicon based chip design is used. In addition, a heat dissipation silicone patch is included to effectively prevent excessive temperature.
  • 【Simple and portable】 M.2 NVME SSD compatible. The usb nvme adapter comes with screws and screwdriver, easy to install and portable.
  • 【Plug and Play】This nvme usb adapter uses the cooling pad and aluminum alloy heatsink included in the package to help the SSD transfer heat better,Plug and play, no need for any drivers, very convenient to use.

Full Specifications

BrandELUTENG
ColorBlack
FinishSilicone
Unit Count1 Count
ConnectivityUSB
Model NumberM.2 NVME to USB
CompatibilityPC, Mac, Linux
Built-In MediaCD
Connector TypeUSB Type A
Mfr Part NumberELT_NVME_TYPEA_USB_BK
Number of Items1
Number of Ports1
Power Plug TypeNo Plug
Compatible DevicesM.2, NVME, SSD
Warranty Description12 months
Specific Uses For ProductLaptop

Ready to buy?

ELUTENG NVME to USB Adapter USB 3.1 Gen 2 to M.2 NVMe SSD Converter Adapter 10Gbps PCIe Based M Key Hard Drive Reader Max 4TB Support UASP for 2280 2260 2242 2230 SSD (Only for M.2 NVME) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Storage Adapters

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
ELUTENG NVME to USB Adapter USB 3.1 Gen 2 to M.2 NVMe SSD Converter Adapter 10Gbps PCIe Based M Key Hard Drive Reader Max 4TB Support UASP for 2280 2260 2242 2230 SSD (Only for M.2 NVME)
View on Amazon →