Skip to main content
StarTech.com M.2 SATA SSD to 2.5" SATA Adapter [NOT NVMe], Open-Frame Bracket, 7mm High, M2 Hard Drive Adapter - TAA
StarTech.com

StarTech.com M.2 SATA SSD to 2.5" SATA Adapter

Bottom line: The StarTech.com M.2 SATA SSD to 2.5" SATA Adapter ($24.17 on Amazon as of 2026-11-20 17:29 UTC): Open-frame PCB vents heat off the SSD instead of trapping it in a sealed enclosure; main trade-off: will not work with M.2 NVMe or AHCI PCI-Express SSDs at all.

$24.17 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ Open-frame PCB vents heat off the SSD instead of trapping it in a sealed enclosure
  • ✓ Mounting holes fit 2230, 2242, 2260, and 2280 M.2 drive lengths
  • ✓ 7mm height clears standard 2.5-inch laptop and enclosure drive bays
  • ✓ Passes SATA III signaling at up to 6Gbps with no drivers to install
  • ✓ TAA-compliant, which clears government and defense contractor procurement rules

Cons

  • ✗ Will not work with M.2 NVMe or AHCI PCI-Express SSDs at all
  • ✗ Only B key and B+M key drives fit; M key NVMe sticks are excluded
  • ✗ Exposed PCB leaves the SSD unprotected against dust and handling damage
  • ✗ Adds no speed of its own; throughput is capped by the host SATA controller

Manufacturer description

The StarTech.com M.2 SATA SSD to 2.5" SATA Adapter solves a specific problem: you have a spare M.2 SATA SSD and a machine that only takes 2.5-inch drives. Drop the SSD into this open-frame bracket and it presents itself to your SATA III controller as a standard 7mm 2.5" drive, with transfer speeds up to 6Gbps and no drivers to install. Mounting hardware is included. The open-frame design is deliberate rather than cost-cutting. Leaving the PCB exposed lets heat dissipate off the SSD instead of trapping it inside a sealed shell, which matters during sustained writes. Mounting holes cover 2230…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for StarTech.com M.2 SATA SSD to 2.5" SATA Adapter, so this read rests on the manufacturer's listed specs and the current price in the storage adapters category (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Open-frame PCB vents heat off the SSD instead of trapping it in a sealed enclosure"; the main trade-off is "Will not work with M.2 NVMe or AHCI PCI-Express SSDs at all". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this work with my NVMe M.2 SSD?

No. StarTech.com states explicitly that the adapter supports M.2 SATA SSDs only, and is not compatible with M.2 NVMe or AHCI PCI-Express drives. Check your SSD's spec sheet for the words SATA and B key or B+M key before ordering.

What M.2 drive sizes does the bracket fit?

It has mounting positions for 2230, 2242, 2260, and 2280 lengths, which covers effectively every consumer M.2 SATA form factor from the shortest module to the full-length 80mm stick.

Do I need to install any drivers or software?

No. The adapter passes SATA signaling straight through, so the drive appears to your system as an ordinary 2.5-inch SATA disk. Mounting hardware is included in the box.

Will it fit in a slim laptop drive bay?

The adapter is 7mm high, which is the standard slim 2.5-inch drive height accepted by most laptop bays, external enclosures, and drive caddies. Bays built for 9.5mm drives will also accept it.

Is the exposed circuit board a problem for heat or reliability?

StarTech.com designed the open frame specifically to maximize heat dissipation off the SSD. Rated operating temperature runs from -40F to 185F. The tradeoff is no physical shell, so handle it by the edges and keep it out of dusty installations.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • NOTE: NOT compatible with M.2 NVMe or AHCI PCI-Express SSDs [Support only M.2 SATA]
  • BOOST SYSTEM PERFORMANCE: Increase system performance by adding the speed of an M2 SSD in any 2.5" SATA application with the M2 SSD to 2.5in SATA Adapter; Open design maximizes heat dissipation to protect the health of your drive
  • BROAD COMPATIBILITY: The M2 to SATA converter supports full length M2 SDD solid state drives and can mount multiple drive heights including: 2230, 2242, 2260, and 2280; NOTE: Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
  • INCREASED TRANSFER SPEEDS: Utilize the full potential of your SATA III controller with an M2 SSD, reducing your data transfer bottleneck with file transfer speeds up to 6Gbps; Operating Temperature: -40F to 185F; Supports B Key/M plusB Key M2 SATA SSDs

Full Specifications

NOTENOT compatible with M.2 NVMe or AHCI PCI-Express SSDs [Support only M.2 SATA]
BrandStarTech.com
ColorBlack
Unit Count1 Count
Model NumberSAT32M225
Warranty TypeLimited
Built-In Media1xMounting Screw Kit,1xInstallation Manual
Connector TypeAuxiliary
Item Type NameDrive Bay Adapter
Item Dimensions3.9 x 2.8 x 0.3 inches
Mfr Part NumberSAT32M225
Number of Items1
Number of Ports1
Power Plug TypeNo Plug
Compatible DevicesSupports 7mm or larger 2.5" SATA bays, Supports full length M.2 SSD Solid State Drives (2230, 2242, 2260, 2280)
Warranty Description2 Years
Item dimensions L x W x H3.9 x 2.8 x 0.3 inches
Specific Uses For Productpersonal
External Testing CertificationCE, FCC
Global Trade Identification Number00065030855600
Full listing titleStarTech.com M.2 SATA SSD to 2.5" SATA Adapter [NOT NVMe], Open-Frame Bracket, 7mm High, M2 Hard Drive Adapter - TAA

Ready to buy?

StarTech.com M.2 SATA SSD to 2.5" SATA Adapter [NOT NVMe], Open-Frame Bracket, 7mm High, M2 Hard Drive Adapter - TAA is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $24.17

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →