GENNEL 2-Pack GT-1 Silver CPU Thermal Paste (1g*2)
Bottom line: The GENNEL 2-Pack GT-1 Silver CPU Thermal Paste ($4.99 on Amazon as of 2026-10-06): Non-conductive and flame retardant, so spills near SMD components won't short; main trade-off: no published W/mK conductivity figure to compare against Arctic MX-6 or Kryonaut.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Non-conductive and flame retardant, so spills near SMD components won't short
- ✓ Wide -50C to 240C working range holds under sustained gaming load
- ✓ Kit includes cleaning wipes, finger cots, and spatulas - no separate prep supplies
Cons
- ✗ No published W/mK conductivity figure to compare against Arctic MX-6 or Kryonaut
- ✗ 1g per syringe is tight for large GPU dies or delidded HEDT spreaders
- ✗ Silicone-based grease, not liquid metal - won't match LM on delidded chips
- ✗ Small syringes dry out faster once opened than a sealed 4g tube
Manufacturer description
The carbon- and silicon-compound formula holds its rated working range from -50C to 240C, so it stays put under sustained gaming load and survives cold storage between builds. What makes GT-1 easy to recommend for first-time re-pasters is the kit: each order includes cleaning wipes, finger cots, and spatulas, so you can strip the old dried compound and spread the new layer without hunting down isopropyl swabs separately. The balanced viscosity spreads thin rather than clumping, and cleanup off a heat spreader takes one wipe. The paste is non-conductive, non-volatile, and flame retardant, so…
SpecPicks Verdict
SpecPicks scored GENNEL 2-Pack GT-1 Silver CPU Thermal Paste using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. GENNEL's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How many times can I use one 1g syringe?
A standard pea-sized dot on a mainstream CPU heat spreader uses roughly 0.2-0.3g, so a 1g syringe covers two to four applications. With two syringes in the pack you have enough for several rebuilds or a GPU plus a console.
Is this thermal paste safe to use on a PS5?
Yes. GENNEL lists PS4 and PS5 coolers as supported applications, and the compound is non-conductive, non-volatile, and flame retardant, which eliminates short-circuit risk if a small amount contacts nearby board components.
Does it come with everything I need to re-paste?
The pack includes cleaning wipes, finger cots, and spatulas alongside the two 1g syringes, so you can remove old compound and spread the new layer without buying separate applicators.
Will it handle a heavy overclock or a hot GPU?
GT-1 is rated for a -50C to 240C working range, well beyond the 90-100C ceiling of consumer CPUs and GPUs under load. GENNEL does not publish a W/mK figure, so check the listing if you need a specific conductivity number.
Key Features
- High Thermal Conductivity thermal compound for optimal heat-transfer from the CPU/GPU to the heatsink, Perfect consistency can improve the thermal conductivity of contact surface.
- Wide Working Temperature Range -50℃ to 240℃, GT-1 thermal paste is mainly made of carbon compounds and silicon compounds. Provides excellent thermal conductivity.
- Easy to clean and use: Viscously balanced formula allow for easy application and clean up. Comes with cleaning wipes, finger cots and spatulas. Easy to handle even for beginners.
- Long-lasting and Stable Performance: the thermal paste uses highly stable and reliable compound materials, perfectly extending the service life.
- Safety Application: non-conductive, non-volatile, flame retardant, which eliminates the risk of short circuit and discharges and corrosion damage to the chip and the radiator. Excellent for PC CPU GPU PS4 PS5 Coolers Heatsink etc.
Full Specifications
| Brand | GENNEL |
|---|---|
| Weight | 1g |
| Compatibility | PC, PS5, PS4 |
| Long-lasting and Stable Performance | the thermal paste uses highly stable and reliable compound materials, perfectly extending the service life. |
| Full listing title | 2-Pack GT-1 Silver CPU Thermal Paste (1g*2), GPU Heat Sink Paste | Thermal Compound Paste, Heat Sink Compound, Ultra-Low Thermal Impedance Thermal Grease for CPU/PS4/PS5/Chipset/GPU Coolers |
Ready to buy?
2-Pack GT-1 Silver CPU Thermal Paste (1g*2), GPU Heat Sink Paste | Thermal Compound Paste, Heat Sink Compound, Ultra-Low Thermal Impedance Thermal Grease for CPU/PS4/PS5/Chipset/GPU Coolers is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- Best SSD for PS4 Pro in 2026: SATA Upgrades That Cut Load Times
- Ryzen 7 5800X vs Ryzen 9 3900X: Mistral Small 24B Offload (2026)
- Best Storage for a Raspberry Pi Homelab: SATA SSD over USB vs microSD
- AMD EXPO Ultra-Low Latency BIOS Updates: 600-Series Guide
- Play Retro Games in Your Browser: Best Emulators 2025
- How Creative's Sound Blaster Ruled PC Audio for 20 Years
- Best Wireless Gaming Controllers for PC and Console in 2026
- GLM-5.2 on an RTX 3060 12GB: Can the New Open-Weights Leader Run Local?
- Ryzen 5 2600 vs Ryzen 5 5600G for CPU-Only Llama 3.2 3B in 2026
- Intel's Bartlett Lake Core 9 273PQE Reportedly Loses to a Four-Year-Old CPU
- VibeThinker-3B: A 3B Reasoning Model That Fits Any 12GB GPU
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for New Streamers
- Intel Arc B60 Stable Diffusion: Setup & Benchmarks 2025
- Aider vs Cline vs Cursor for Local Coding on a 12GB GPU (2026)
- Modern Retro Console Mods: 2026 Upgrade Guide
- llama.cpp vs vLLM for Single-User Local Chat in 2026: Which Wins on a 12GB GPU?
- Which GPU for Which Model: A Per-LLM VRAM Picker for Local Rigs (2026)
- Strix Halo LLM Benchmarks 2026: What AMD's Ryzen AI Max+ Delivers
- Best AIO Liquid CPU Coolers for High-TDP Builds in 2026
- Best Budget Gaming CPU Under $250 in 2026
- Best Game Streaming Starter Kit in 2026: Mic, Light, and Capture
- Build a Self-Updating 24/7 FM Radio Station on a Raspberry Pi Zero W
- Sony Trinitron FW900 Setup for Retro Gaming: Resolution Sweet Spots, Calibration, and Refresh-Rate Math
- Free Retro Game Emulators: Best Picks for 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090