MOOKEERF BNC Cable 5ft
Bottom line: The MOOKEERF BNC Cable 5ft ($16.99 on Amazon as of 2026-10-10): Solid copper inner conductor, not copper-clad aluminum, for lower resistive loss; main trade-off: 5 ft only, too short for antenna mast or rooftop runs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-10. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Solid copper inner conductor, not copper-clad aluminum, for lower resistive loss
- ✓ Under 0.36 dB loss at 900 MHz with SWR below 1.15
- ✓ 95%+ shielding from aluminum foil plus tinned copper braid against EMI and RFI
- ✓ 2.2-inch heat shrink at each connector guards against strain and pull-off
- ✓ Weatherproof flexible black PVC jacket rated for outdoor runs
Cons
- ✗ 5 ft only, too short for antenna mast or rooftop runs
- ✗ 50 ohm impedance, wrong match for 75 ohm video and CCTV gear
- ✗ KMR240 is an LMR240 equivalent, not genuine Times Microwave cable
- ✗ BNC male on both ends, so adapters are needed for SMA or N-type ports
SpecPicks Verdict
SpecPicks scored MOOKEERF BNC Cable 5ft using a rating × review-volume × price-fit model applied to published specs and reviews across the display & crt accessories category. MOOKEERF's display & crt accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for display & crt accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- ⭐Applications -- This bnc coax cable is widly used for bnc antennas,ham radio,two-way radio,network analyzer,modems,oscilloscopes,spectrum,surveillance,signal generators,attenuator and ect.
- ⭐Low Loss & Low SWR -- The signal loss of this (lmr240 equivalent) kmr240 50 ohm bnc cable 5ft is less than 0.36db on 900MHz.Swr is less than 1.15.It could support better signal transfer with minimum signal loss over large distances and higher frequency use.
- ⭐Well Built Construction -- The inner conductor of this bnc male to bnc male cable is made of solid copper but not copper clad aluminium,and the outer conductor is made of Aluminum foil and tinned copper braid which could maximum protect the signal over large distance.More than 95% shield performance,95% resistance to EMI and RFI.Weatherproof and flexible black PVC jacket allows the cable exposure in outdoor harsh environments.
- ⭐Stronger Connection -- High quality connectors will not pull off,break and lose signal.The length of heat shrink tube that connect the (lmr240 equivalent) kmr240 coaxial cable and bnc connector is upgraded to 2.2",which can better protect the connector from falling off.
- ⭐Professional Produce -- MOOKEERF is a professional manufacturer of RF cable,all our cables are made to the highest standards.If you are not satisfied with any product, please don’t hesitate to contact us,we will serve you our best.
Full Specifications
| Brand | MOOKEERF |
|---|---|
| Color | Black |
| Model | 240-BNC-JJ-5FT |
| Frequency | 900 MHz |
| Cable Type | KMR240 |
| Item Shape | Round |
| Unit Count | 1.0 Count |
| Item Length | 5 Feet |
| Part Number | 240-BNC-JJ-5FT |
| Connector Type | RF Connector |
| Number of Pins | 2 |
| Outer Material | Aluminum and copper |
| Number of Items | 1 |
| Special Feature | gps |
| Connector Gender | Male-to-Male |
| Compatible Devices | Router |
| Data Transfer Rate | 5 Gigabits Per Second |
| Indoor Outdoor Usage | Outdoor |
| Compatible Phone Models | No Compatible Phone Models |
| Recommended Uses For Product | bnc antennas, ham radio, two-way radio, network analyzer, modems, oscilloscopes, spectrum, surveillance, signal generators, attenuator, GPS |
| Full listing title | MOOKEERF BNC Cable 5ft,Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, Signal Generator, etc |
Ready to buy?
MOOKEERF BNC Cable 5ft,Low Loss KMR240 BNC Male to Male Coax Cable 50 Ohm for Antennas, RF Radios, Modems, Oscilloscopes, Spectrum, Signal Generator, etc is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-10. Price and availability subject to change.
Related Display & CRT Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- Best 4K Monitor for PS5 and Xbox Series X Console Gaming in 2026
- Local LLM on Mac: The 2026 Setup Guide
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
- Best SSD for Steam Deck and Handheld PCs in 2026
- MicroPython Now Runs on the Super Nintendo — Here's What That Means
- Best SSD to Upgrade a PS4 in 2026
- Sound Blaster AWE32/AWE64 to Audigy: The Right Sound Card for Every Retro Era
- IBM Granite 4.1 8B vs Qwen 3.6 27B: Which Small Local Model Wins on a 16GB GPU?
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- Self-Host Jellyfin on the Raspberry Pi 4 8GB: Transcoding Limits
- How to Image and Preserve a Vintage IDE Hard Drive in 2026 (CompactFlash + USB Adapter Workflow)
- Ultrawide vs 27-Inch 4K for Sim Racing on a G29 and RTX 3060
- Building a 1998 Voodoo2 SLI Gaming PC With CF Storage in 2026
- Best Streaming Setup for PC Gamers in 2026: 5 Picks Under $500
- RTX 3060 12GB vs RTX 5060: Best Value for 1080p Gaming + Local AI
- Imaging Big-Box CD-ROMs to CompactFlash for a Windows 98 Retro PC
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
- OpenAI Now Uses AI to Red-Team Its Own Models: What It Means for Local Setups
- First Homelab Setup: Hardware, Security & Networking Guide
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- Best 4K Monitor for an RTX 3060 12GB: KOORUI vs Samsung Odyssey
- Best CPU for Streaming and Gaming Under $300: Ryzen 7 5800X vs 5700X vs 5600G
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090