XRDS -RF 200W PL259 UHF Male RF Dummy Load for Ham Radio, 50 Ohm Dummy Load
Bottom line: The XRDS -RF 200W PL259 UHF Male RF Dummy Load for Ham Radio is a specs-and-price decision rather than a crowd-consensus one in the PC & gaming hardware category, priced around $62.99 on Amazon as of 2026-10-21 16:28 UTC. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 200W PL259 UHF Male Plug DC-520 MHz dummy load
- ✓ Backed by XRDS -RF's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored XRDS -RF 200W PL259 UHF Male RF Dummy Load for Ham Radio using a rating × review-volume × price-fit model applied to published specs and reviews across the PC & gaming hardware category. XRDS -RF's PC & gaming hardware lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for PC & gaming hardware of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 200W PL259 UHF Male Plug DC-520 MHz dummy load
- Connector Type: PL259 Male. Impedance: 50ohm
- Adapter Material: The outer shell is nickel plated copper, and the inner needle is silver plated copper
- Frequency Range: DC to 520MHz. VSWR:≤ 1.2
- The 200Watt PL259 Dummy Load is a self-contained air-cooled resistive unit that easily attaches to the male PL259 antenna connector on the back of the Amateur Radio rig.
Full Specifications
| Brand | XRDS -RF |
|---|---|
| Connector Type | PL259 Male. Impedance: 50ohm |
| Frequency Range | DC to 520MHz. VSWR:≤ 1.2 |
| Adapter Material | The outer shell is nickel plated copper, and the inner needle is silver plated copper |
| Package Dimensions | 10.47 x 5.91 x 3.5 inches |
Ready to buy?
XRDS -RF 200W PL259 UHF Male RF Dummy Load for Ham Radio, 50 Ohm Dummy Load is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Build a Pi Zero W Handheld Retro Emulator in 2026: Full Parts List and Setup
- Is the Logitech G502 Hero Still the Best FPS Mouse in 2026?
- Best Streaming Microphone for Twitch in 2026
- Best 4K Monitor for the PS4 Pro and PS5 in 2026 (Value Pick)
- Mistral AI Seeks €3 Billion to Fund Its European Push — The Local-vs-Cloud Angle
- Troubleshooting WinXP Audigy FX Install Failures in 2026
- Genesis Mini vs SNES Classic vs Raspberry Pi 4: Which Retro Setup Wins in 2026?
- AMD RX 9070 XT Hits All-Time Low $629 in Amazon Lightning Sale
- How to run DeepSeek-R1 32B on AMD Radeon RX 7900 XTX
- ASUS ROG Zephyrus G1 OLED RTX 5070 Drops $575 This Week — Is It the Right Buy?
- Best Game Controller for PC in 2026: 5 Picks Tested Against Real Use
- The Sound Blaster Monopoly: How Creative Labs Owned PC Audio
- Running Llama 3.1 70B Locally: Hardware Requirements & Performance Benchmarks
- Claude Fable 5 Tops the Intelligence Index: What Frontier Cloud AI Means for Local Rig Builders
- 1-Trillion-Param LLM on 768GB of Optane vs a 12GB RTX 3060: What's Practical
- Linux 7.3: 'Flatten the Pick' Scheduler Gains for Gaming
- Best Budget 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI Mini-LED
- Best Game Controller for PC and Console in 2026
- Best Single-Board Computer Kits for Beginners (2026)
- Running a Local Coding Agent on an RTX 3060 12GB: Qwen3-Coder in Practice
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 4090
- Build a Silent Win98 Retro PC with CompactFlash Storage (2026)
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- Best SATA SSD for a 2026 Game Library Drive
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090