Hosyond 7 Inch Touchscreen IPS DSI Display Compatible with Raspberry Pi 5/4/3
Bottom line: The Hosyond 7 Inch Touchscreen IPS DSI Display ($38.99 on Amazon as of 2026-10-20 16:16 UTC): Connects through the Pi's MIPI DSI port with no extra cables needed; main trade-off: 800x480 resolution is low for desktop browsing or small text.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Connects through the Pi's MIPI DSI port with no extra cables needed
- ✓ 7-inch 800x480 IPS panel with wide viewing angles for angled mounts
- ✓ Capacitive touch with two-finger zoom on older Raspbian versions
- ✓ Fits Pi 5, 4B, 3B+, 3B, 3A+ and 2B boards
- ✓ Plug and play with no drivers on fresh Pi systems; adjustable backlight
Cons
- ✗ 800x480 resolution is low for desktop browsing or small text
- ✗ No HDMI input, so it can't work as a monitor for PCs or other boards
- ✗ Only one touch point at a time on Ubuntu, Kali and Windows 10 IoT
- ✗ Two-finger zoom is limited to older Raspbian versions
Manufacturer description
The Hosyond 7 inch touchscreen display gives your Raspberry Pi its own compact screen that connects straight to the board's MIPI DSI interface. You don't need an HDMI cable or any other connection. That keeps builds like wall-mounted dashboards, smart-home control panels and portable project consoles tidy. The 7-inch IPS panel runs at 800x480 pixels and has wide viewing angles, so you can still read it when it lies flat on a desk or sits at an angle inside an enclosure. The capacitive touch layer responds to a light finger tap. You can also turn the backlight up or down for a dim workshop or…
SpecPicks Verdict
SpecPicks scored Hosyond 7 Inch Touchscreen IPS DSI Display using a rating × review-volume × price-fit model applied to published specs and reviews across the accessories category. Hosyond's accessories lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for accessories of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does the Hosyond 7 inch display work with the Raspberry Pi 5?
Yes. Hosyond lists it as compatible with the Raspberry Pi 5, 4B, 3B+, 3B, 3A+ and 2B. It connects through the board's MIPI DSI interface. Check the product listing to see which ribbon cables come in the box for your board.
Can I use this screen with HDMI or with a laptop or PC?
No. The display has no HDMI port and works only with the Raspberry Pi models listed. It won't work with any other device.
Do I need to install drivers or edit config files?
No drivers are needed. On a new Raspberry Pi system, or one whose settings haven't been changed, the screen is plug and play. If you have changed your display settings, follow the included instructions.
Does the touchscreen support multi-touch?
On older versions of Raspbian you can zoom pages with two fingers. On Ubuntu, Kali and Windows 10 IoT the screen supports only one touch point at a time.
What is the resolution, and can I adjust the brightness?
It is a 7-inch IPS panel at 800x480 pixels with wide viewing angles, and you can adjust the backlight brightness.
Key Features
- 7 inches, 800x480 pixels, IPS type, wide viewing angle, capacitive touchscreen, enjoy smooth touch response and excellent clarity for all your Raspberry Pi projects.
- Specially designed, simply connect to your raspberry pi's MIPI DSI interface. (No additional connections required.)
- Fully Compatible with Raspberry Pi 5/ 4B / 3B+ / 3B / 3A+ / 2B. (No HDMI port, not compatible with any other device.)
- Supports for Raspbian OS 2 points to zoom the page(old version), for Ubuntu/Kali/Win10 IoT (single-touch only). Support backlight brightness adjustment.
- Easy to use, no configuration required, plug and play (for new and configuration unchanged raspberry pi systems). Instructions was provided.
Full Specifications
| Size | 7 inches |
|---|---|
| Brand | Hosyond |
| Color | black |
| Model | 7 Inch Touchscreen IPS DSI Display |
| Warranty | One Month |
| UnitCount | 1 |
| Manufacturer | Hosyond |
| Full listing title | Hosyond 7 Inch Touchscreen IPS DSI Display Compatible with Raspberry Pi 5/4/3, 800x480 Pixel Capacitive Screen MIPI Driver-Free Interface |
Ready to buy?
Hosyond 7 Inch Touchscreen IPS DSI Display Compatible with Raspberry Pi 5/4/3, 800x480 Pixel Capacitive Screen MIPI Driver-Free Interface is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-20. Price and availability subject to change.
Read our analysis
SpecPicks coverage that features this Accessorie.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc A770 LLM Performance: Local Inference Guide
- Best Budget Gaming SSDs Under $100 in 2026
- AMD Ryzen 9 9950X Hitting 98°C While Streaming?
- Adding Modern Audio to a Retro PC: Sound BlasterX G6 on XP
- Best Plug-and-Play Retro Game Console in 2026
- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- Adafruit's Cyberdeck Raspberry Pi Music Workstation Guide Lands
- GPT-5.6 Sol Nearly Matches Fable 5 at a Third the Cost: The Local-Rig Angle
- Microsoft's Copilot Super App vs a Local RTX 3060 Ollama Box in 2026
- Build a Private Security Camera on a Raspberry Pi (Ring Alternative) in 2026
- Ryzen 7 5800X3D vs 5800X for 1080p Competitive Gaming: Which Wins?
- Build a Self-Hosted AI Home Lab on a Raspberry Pi 4 8GB in 2026
- Best Raspberry Pi 4 8GB Retro Emulation Setup in 2026
- KDE Plasma 6.7 X11 vs. Wayland NVIDIA Gaming on CachyOS
- RTX 3060 Drop-In vs AM4 Rebuild for an i7-9700K in 2026
- Building a Period-Correct 2001 Win98 Rig With Parts You Can Still Buy
- Ryzen AI Developer Platform: AMD's Debian Linux for AI Devs
- NVFP4 on RTX 50-Series: What llama.cpp's Native FP4 Support Means for Local Inference
- Local-LLM PC Build on a 16GB Card: What r/LocalLLaMA and r/buildapc Concluded (2026)
- Why Direct3D Killed Glide: How the 3dfx Voodoo Empire Lost the API Wars
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
- Best Streaming & Content-Creation Starter Kit in 2026
- RTX 3060 12GB vs Ryzen 5 5600G iGPU: Do You Need a GPU for 1080p Esports?
- Best PC Gaming Peripherals in 2026: 5 Picks for Keyboard, Audio, and Control
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090