Geekworm
Geekworm X1015 PCIe to M.2 HAT Key-M NVMe SSD Shield for Raspberry Pi 5 Support M.2 2230/2242/2260/2280 SSD
Bottom line: The Geekworm X1015 PCIe to M.2 HAT Key-M NVMe SSD Shield is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Backed by Geekworm's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
About this item Compatibility: Pi 5 PCIe M.2 HAT only compatible with Raspberry Pi 5 2GB/4GB/8GB SBC; Model: X1015; Matching metal case is P579 M2 Key-M NVMe SSD Supported: Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation; Comes with SSD copper pillar for short SSD installation User Manual and FAQ: Google Geekworm Wiki and search X1015 and its FAQ; Refer to the FAQ to do troubleshoot step by step if can't boot/recognize from NVMe SSD Raspberry Pi 5 AI Hat Extension: Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit How to Power…
SpecPicks Verdict
SpecPicks scored Geekworm X1015 PCIe to M.2 HAT Key-M NVMe SSD Shield using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. Geekworm's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Compatibility Pi 5 PCIe M.2 HAT only compatible with Raspberry Pi 5 2GB/4GB/8GB SBC; Model X1015; Matching metal case is P579
- M2 Key-M NVMe SSD Supported Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation; Comes with SSD copper pillar for short SSD installation
- User Manual and FAQ Google Geekworm Wiki and search X1015 and its FAQ; Refer to the FAQ to do troubleshoot step by step if can't boot/recognize from NVMe SSD
- Raspberry Pi 5 AI Hat Extension Supports Hailo AI acceleration module built around the Hailo-8L chip from Raspberry Pi AI Kit
- How to Power 5Vdc +/-5% power via GPIO pin header and FFC, converted to 3.3V max 3A to power the SSD; Use Geekworm PD 27W power adapter for Raspberry Pi 5
Full Specifications
| ASIN | B0D7B9CTYP |
|---|---|
| Brand | Geekworm |
| Model Name | X1015 |
| Item Weight | 17 Grams |
| Manufacturer | Geekworm |
| Model Number | X1015 |
| Built-In Media | 1 x X1015 PCIe Peripheral Board with Accessories |
| Mfr Part Number | TB-2024-29 |
| Processor Brand | ARM |
| Processor Count | 1 |
| Compatible Devices | Raspberry Pi 5 |
| Included Components | 1 x X1015 PCIe Peripheral Board with Accessories |
| Warranty Description | 3 months |
| RAM Memory Technology | LPDDR4 |
| Connectivity Technology | GPIO |
Hardware benchmark data
Ready to buy?
Geekworm X1015 PCIe to M.2 HAT Key-M NVMe SSD Shield for Raspberry Pi 5 Support M.2 2230/2242/2260/2280 SSD is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- Build a Budget Local-LLM Workstation Under $1,500: Ryzen 7 5800X + RTX 3060 12GB Benchmarks
- Best Hardware for Local OCR and Document AI in 2026
- Best Streaming Setup Gear for Beginners in 2026
- Qwen3.6-27B vs Coder-Next: Local Code Accuracy and VRAM on AMD Rigs
- Best AM4 CPU for Streaming While Gaming: 5600G vs 5700X vs 5800X
- NVIDIA Bankrolls AI Startups to Tighten Its Chip Grip
- Mystery N64 Cartridge Found in the Woods Boots Up
- How to run Llama 3.1 70B on Arc B580
- Local LLM Setup in 2026: AMD GPU Guide by Model Size
- Best Budget CPU for Gaming + Productivity in 2026: The Honest Buying Guide
- Running Qwen 3.6 27B on a Single RTX 3060 12GB: Quantization, Context, and Real Tok/s
- Local LLM vs Claude in 2026: When On-Device Beats the API
- Best GPU for Running Ollama on 12GB VRAM in 2026: RTX 3060 12GB Deep-Dive
- Ex-Sega Engineer Builds a 'Super-Realistic' CRT Emulator
- Troubleshooting Sound Blaster Audigy FX Crackling and Driver Failures on WinXP (2026)
- AMD Ryzen AI Max for Local LLMs: What the Specs Mean
- Best Controller for Retro Emulation on PC: 8BitDo, GameSir, DualSense
- Anthropic Keeps Supplying Claude to the NSA After Pentagon Supply-Chain Flag
- Best 1TB SATA SSD for Cloning Old Drives and OS Migrations 2026
- Count Anything Runs Locally on a 12GB GPU: Object-Counting AI on the RTX 3060
- Radeon Pro W7900 48GB vs RTX A6000 48GB for Local 70B Inference (2026)
- Grok Imagine Video 1.5 Is #2 — What GPU Runs Local Video Gen?
- Proprietary Models See Your Business: The Case for a Local Ryzen + RTX 3060 Rig
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090