Creality
Creality 3D Printer Thermal Paste High Thermal Conductivity 250℃ Resistant Theramal Paste
Bottom line: The Creality 3D Printer Thermal Paste High Thermal Conductivity 250℃ ($7.64 on Amazon as of 2026-10-06): Two-pack covers multiple hotend rebuilds before reordering; main trade-off: rated 250C, below the 300C peak some high-temp hotends reach.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Two-pack covers multiple hotend rebuilds before reordering
- ✓ Rated to 250C, above typical 300C-class nozzle service temps for routine swaps
- ✓ Fits Creality K1, K1C, K1 Max, K2, K2 Pro, K2 Plus, K2 SE, Ender 3 V3 SE, i7
- ✓ Non-conductive formula, so stray smears near wiring stay insulating
Cons
- ✗ Rated 250C, below the 300C peak some high-temp hotends reach
- ✗ Creality-oriented compatibility list; other brands are untested by the maker
- ✗ No stated thermal conductivity figure in W/mK to compare against CPU pastes
- ✗ Pack size and syringe volume are not published on the listing
SpecPicks Verdict
SpecPicks scored Creality 3D Printer Thermal Paste High Thermal Conductivity 250℃… using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. Creality's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- 【3D Printer Thermal Paste】 Specifically designed for 3D printers, this thermal paste helps fill gaps between heating blocks, hotends, and nozzles, improving heat transfer efficiency and maintaining stable temperatures for consistent printing performance
- 【Excellent Thermal Conductivity】 Engineered for efficient thermal management, this thermal grease enhances heat dissipation and helps optimize heat transfer between components, making it ideal for hot end maintenance, nozzle replacement, and routine printer servicing
- 【High Temperature & Long-Lasting Performance】 Designed to withstand high-temperature operating environments, this thermal paste provides reliable performance and durability during continuous printing, reducing the need for frequent reapplication and helping extend component lifespan
- 【Safe & Reliable Protection】 Made with a non-toxic, non-corrosive, and electrically insulating formula, this thermal paste helps protect 3D printer components while ensuring safe and reliable operation during maintenance
- 【Essential for 3D Printer Maintenance】 A must-have accessory for replacing hot end components or performing regular maintenance. It helps maintain optimal thermal performance and keeps your 3D printer operating efficiently. Compliant with RoHS, HF, and REACH environmental standards
Full Specifications
| Brand | Creality |
|---|---|
| Unit Count | 2 Count |
| Part Number | AMUS-LD-AC-Grease |
| Number of Items | 2 |
| Included Components | creality grease |
| Global Trade Identification Number | 00198549010649 |
| Full listing title | Creality 3D Printer Thermal Paste High Thermal Conductivity 250℃ Resistant Theramal Paste for 3D Printer Nozzles Compatible with K1/K1C/K1 Max/Ender 3 V3 SE/i7/K2/K2 Pro/K2 Plus/K2 SE (Pack of 2) |
Ready to buy?
Creality 3D Printer Thermal Paste High Thermal Conductivity 250℃ Resistant Theramal Paste for 3D Printer Nozzles Compatible with K1/K1C/K1 Max/Ender 3 V3 SE/i7/K2/K2 Pro/K2 Plus/K2 SE (Pack of 2) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi Pico W Becomes a Driverless USB WiFi Adapter
- Intel Arc vs NVIDIA 2026: Local LLM Tokens per Dollar
- 256GB Samsung microSD Drops to $32 — Storage Prices Slide
- AMD Ryzen AI Halo vs NVIDIA DGX Spark: Local-AI Mini-Box Showdown
- Period-Correct 2001 Pentium III Build: Sound Blaster Audigy Era Synthesis
- Best GPU for ComfyUI & Stable Diffusion Under $300 in 2026
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLM
- RTX 5090 Prebuilt vs a $700 RTX 3060 Local-LLM Box: What Extra VRAM Actually Buys
- Irtysh 32-Core CPU: Is the 30+ FPS Witcher 3 Claim Real?
- Best Budget Streaming Setup for Beginners in 2026
- Voodoo 5 6000 Lab Method: Two Motherboards, One Dead BIOS
- Sega Genesis Mini vs SNES Classic Edition: Which Mini Console Wins in 2026?
- Best Wireless Productivity Keyboards Under $50 in 2026
- Qwen 3.6 35B-A3B vs Qwen 3.6 27B Dense: Which Local LLM Wins on a Single 24GB GPU?
- Raspberry Pi 5 16GB Ships — Is the Pi 4 8GB Still Worth It?
- GeForce FX 5900 Won't POST or Crashes in WinXP: Troubleshooting Guide
- Running Mistral's New OCR Model Locally on a 12GB GPU
- Best GPU for 1080p 240Hz Esports: RTX 3060 12GB Build (2026)
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Best CPU for Gaming in 2026: Intel vs AMD Showdown
- Sega Saved Nvidia in 1996: The NV1 Gamble That Shaped Every GPU
- Why Cheap Monitors Use HDMI Instead of DisplayPort
- Best Raspberry Pi 5 Alternatives in 2025
- Ryzen AI Max 385 Mini PC: Specs and What It's Really For
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090