Alinan 4pcs 8010 80mm x 10mm 5V Dual Ball Bearings Brushless Fan 2Pin DC Cooling Exhaust Fan for Radiator DIY Air Exhaust Vent Cooling
Bottom line: The Alinan 4pcs 8010 80mm x 10mm 5V Dual Ball Bearings Brushless Fan 2Pin is a specs-and-price decision rather than a crowd-consensus one in the retro cpu coolers & fans category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Before you buy
- Confirm socket / form-factor / power-rating compatibility against your build before ordering
- Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Features:Bearing Type: Dual ball bearingsDimensions: 80x80x10mm/3.0 x 3.0 x 0.4inchVoltage: DC 5VCurrent: 0.1AmpPower: 1.5WattSpeed: 2200RPMAirflow: 15CFMNoise: 22dBAConnector: XH2.54-2 pinRated Speed: 2800 RPMAir Flow: 20.06CFMWire Length: 15cm/5.9inchSuitable for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirements
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Alinan 4pcs 8010 80mm x 10mm 5V Dual Ball Bearings Brushless Fan…, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Dimensions: 80x80x10mm/3.0 x 3.0 x 0.4inch; Voltage: DC 5V; Current: 0.1Amp; Power: 1.5Watt; Speed: 2800RPM; Air Flow: 20.06CFM; Noise: 22dBA, wire length is 15cm.
- High quality dual ball bearings, more stable and Long life, suitable for continuous work. 5V 8010 fan is best for cooling the hottest and narrow spaces, circulating and exhausting stuffy air.
- Computer and peripherals, graphics card peripheral cooling, cooling base fan, designed for projects that requires cooling or ventilation or as an replacement fan for various products , allows the fans to be laid flat or stand upright.
- Blow warm air out of the case , draw cool air into your case, push the hot air out of your computer when mounted on the back or draw in fresh air if you mount it at the front of the case .
- Widlly suit for hot end cooling, 3D printers hotend, computer, humidifier or other cooling requirements.
Full Specifications
| Brand | Alinan |
|---|---|
| Model | others |
| Voltage | 5 volts_of_direct_current |
| Wattage | 1.5 watts |
| Dimensions | 80x80x10mm |
| Unit Count | 4 Count |
| Noise Level | 1 sones |
| Part Number | others |
| Cooling Method | others |
| Number of Items | 4 |
| Number of Packs | 4 |
| Air Flow Capacity | 20.06 cfm |
| Compatible Devices | others |
| Included Components | others |
| Power Connector Type | 2-Pin |
| Maximum Rotational Speed | 1 rpm |
| Item Dimensions L x W x H | 3.15"L x 3.15"W x 0.39"H |
Benchmark data for other processors
Ready to buy?
Alinan 4pcs 8010 80mm x 10mm 5V Dual Ball Bearings Brushless Fan 2Pin DC Cooling Exhaust Fan for Radiator DIY Air Exhaust Vent Cooling is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best Single-Board Computers for AI and Robotics Projects in 2026
- RE Requiem and the AAA Games That Prove Steam Deck
- Open-Weight Models Caught Up on Cyber Benchmarks in Four Months — What That Means for Your Rig
- Steam Deck Sleep Mode: Should You Leave It Plugged In?
- Best Game Controllers for PC and Console (2026)
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Best Local LLM Parts to Buy Before the 2026 Memory Spike
- FLUX.2 Klein 4B for Halloween Art: RTX 3060 12GB vs RTX 5060 8GB
- EU GPU Price Tracking: Why RTX 5090 Won't Get Cheaper
- Intelligence Index v4.1 Goes Agentic: Can a 12GB RTX 3060 Keep Up Locally?
- Jetson Orin Nano Super vs Raspberry Pi 5: Real Edge-AI Benchmarks (2026)
- Best Gaming CPU for 1080p and 1440p Builds in 2026
- The $500M Claude Bill: What Local LLM Inference Actually Costs
- Best Parts for an Always-On Local LLM Server in 2026
- Gemini Intelligence Hardware Requirements Explained
- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- $1,000 Gaming PC Build 2026: Parts, Cost, 1080p FPS
- Bigme Color E-Ink Monitor: 60 FPS and 4096 Colors Explained
- Best Way to Stream a PS4 Pro to PC: Elgato Cam Link 4K Capture Setup
- Best GPU for Stable Diffusion and Local Image Generation in 2026
- Dual RTX 3090 Ti in 2026: Worth It vs. the Alternatives?
- Best Retro Gaming Gifts in 2026: 5 Picks for Console and PC Collectors
- Did Anyone Actually Ditch iCloud or Google One for Self-Hosting?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090