Skip to main content
FNIRSI DPS-150 DC Power Supply Variable 30V 5A, 4-Digit IPS Flip Display
FNIRSI

FNIRSI DPS-150 DC Power Supply Variable 30V 5A, 4-Digit IPS Flip Display

Bottom line: The FNIRSI DPS-150 DC Power Supply Variable 30V 5A ($69.99 on Amazon as of 2026-11-20 15:16 UTC): 30V / 5A / 150W output with switchable CC/CV modes; main trade-off: battery charging needs an added reverse-current diode at the output.

$69.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Pros & Cons

Pros

  • ✓ 30V / 5A / 150W output with switchable CC/CV modes
  • ✓ 0.01 V and 0.001 A display resolution for precise limits
  • ✓ Under 20 mV output ripple to protect sensitive electronics
  • ✓ 6 preset output groups plus PC programmable control
  • ✓ 2.8-inch IPS screen flips 90 degrees, shows values or curves

Cons

  • ✗ Battery charging needs an added reverse-current diode at the output
  • ✗ Needs an external PD, QC or DC input source to operate
  • ✗ Switching design may not suit ultra-low-noise analog or RF work
  • ✗ Only 6 preset slots for saved voltage/current combinations

Manufacturer description

The FNIRSI DPS-150 DC power supply puts a programmable 30 V, 5 A, 150 W bench source in a compact switching design. You can switch between constant current and constant voltage, and the display reads to 0.01 V and 0.001 A, so you can set exact limits before powering a prototype. Output ripple stays under 20 mV, which helps protect sensitive boards from voltage swings. You can power the DPS-150 from a PD, QC or DC input. Six preset groups store your common voltage and current settings, and PC programmable output lets you control it from a computer. The 2.8-inch IPS color screen flips up 90…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for FNIRSI DPS-150 DC Power Supply Variable 30V 5A, so this read rests on the manufacturer's listed specs and the current price in the power supplies category (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "30V / 5A / 150W output with switchable CC/CV modes"; the main trade-off is "Battery charging needs an added reverse-current diode at the output". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

What is the maximum output of the FNIRSI DPS-150?

It outputs up to 30 V and 5 A, with a 150 W power rating. You can switch between constant voltage (CV) and constant current (CC) modes.

How does the FNIRSI DPS-150 get its input power?

It supports PD, QC and DC input modes, so you power it from a compatible external source. Check the product listing for the input voltage and wattage you need to get full 150 W output.

Can I use the DPS-150 to charge batteries?

Yes, but FNIRSI strongly recommends adding a reverse-current protection module, such as a Schottky diode, at the output. Without one, current flowing back from the battery can damage the supply.

How precise are the voltage and current settings?

The display reads to 0.01 V and 0.001 A, and output ripple is rated under 20 mV. You can save 6 groups of output settings for quick recall, and control the output from a PC.

What connectors and protections does the DPS-150 have?

The outputs accept 4mm banana plugs, U-shaped spade terminals and bare copper wire. It has 8 safety protections, including overvoltage, overcurrent, short-circuit and overheating protection. Check the product listing for current warranty terms.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • Stable output: 30 V, 5 A, 150 W DC power supply variable, 0.01 V, 0.001 A display, CC/CV switchable, <20 mV low power ripple, effectively protecting precision electronic equipment from voltage fluctuations
  • New upgrade: FNIRSI DPS-150 DC power supply supports PC, QC and DC input modes. This switching power supply is equipped with a PC programmable output function, 6 groups of output parameters can be preset to quickly adjust the output voltage and current
  • Diverse connections: The variable power supply integrates a variety of connection methods such as 4mm banana heads, U -shaped terminals and fine copper wires to meet the connection needs of different electronic equipment and power cords
  • Multiple security protection: Adjustable power supply built in 8 advanced safety protection mechanisms, including overvoltage protection, current protection, short circuit protection, overheating protection, etc., to protect your equipment safety
  • HD interactive display: Equipped with a 2.8 -inch IPS color screen and supports 90 ° flip, which is convenient for multi -angle observation. The UI interface supports numerical display and curve display, and visually display the power status
  • Note: When charging batteries, it is strongly recommended to add a reverse current protection module (such as a Schottky diode) to the output end to protect the device from damage

Full Specifications

BrandFNIRSI
Amperage5 A
Form FactorFlex ATX
Model NumberFNIRSI-DPS-150
CompatibilityPC
Maximum Power150 watts
Built-In Media1*DPS-150; 2*Alligator Clip Wire; 1*USB data cable; 1*User manual; 1*Packing box
Connector TypeATX
Output Current5 A
Output Voltage30 volts_of_direct_current
Output Wattage150 watts
Item Dimensions4.06 x 3.07 x 1.18 inches
Mfr Part NumberFNIRSI-DPS-150
Connector Type Used on CableATX

Ready to buy?

FNIRSI DPS-150 DC Power Supply Variable 30V 5A, 4-Digit IPS Flip Display is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $69.99

*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.

Related Power Supplies

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →