RCGEEK HiBloks Facial Interface with Cooling Fan for Meta Quest 3S Accessories
Bottom line: The RCGEEK HiBloks Facial Interface: Two-speed fan actively clears lens fogging instead of just venting passively; main trade-off: battery life caps long sessions at under 3 hours on high speed.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Two-speed fan actively clears lens fogging instead of just venting passively
- ✓ 700mAh battery runs 3h30m on speed I, 2h40m on speed II
- ✓ Full recharge in about one hour
- ✓ Ships with both ice silk cotton and PU leather pads, swappable via Velcro
- ✓ Removable silicone nose guard blocks bottom light leak
Cons
- ✗ Battery life caps long sessions at under 3 hours on high speed
- ✗ Fan adds weight to the front of an already front-heavy Quest 3S
- ✗ Speed II is described as strong wind, so expect audible fan noise
- ✗ Fits Quest 3S only, not the standard Quest 3 or older Quest 2
Manufacturer description
The HiBloks Facial Interface with Cooling Fan replaces the stock Meta Quest 3S face pad with a ventilated frame that pushes air across the lenses to stop fogging mid-session. A top-mounted two-speed fan runs off a built-in 700mAh battery: speed I is a quiet, natural-wind setting that clears condensation in cold or air-conditioned rooms for about 3 hours 30 minutes, while speed II delivers stronger airflow for roughly 2 hours 40 minutes. Either mode recharges fully in about an hour. The kit ships with two swappable cushions so you can match the session. The 0.63-inch ice silk cotton pad wicks…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for RCGEEK HiBloks Facial Interface, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the vr headsets & accessories category before committing. On the listing's own facts, the case for it is "Two-speed fan actively clears lens fogging instead of just venting passively"; the main trade-off is "Battery life caps long sessions at under 3 hours on high speed". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this fit the Meta Quest 3 or just the Quest 3S?
It is listed as compatible with the Meta Quest 3S only. The fan aligns with two specific ports on the 3S frame, so check the listing before buying for a different headset.
How long does the fan run on a charge?
About 3 hours 30 minutes on speed I (natural wind) and about 2 hours 40 minutes on speed II (strong wind), from the built-in 700mAh battery. A full recharge takes roughly one hour.
Will it actually stop my lenses from fogging?
That is the design intent: speed I is specified for preventing fogging in winter or air-conditioned rooms, while speed II moves more air for heat and sweat during active play.
What comes in the box?
One breathable facial interface, one 2-speed cooling fan, one ice silk cotton pad, one PU leather pad, and one removable silicone light-blocking nose guard.
Is it hard to install or swap the pads?
No tools needed. Remove the stock Quest 3S interface, seat this one, then align the fan with the two top holes and plug it in. The pads attach with Velcro, so swapping between the cotton and leather takes seconds.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【Professional Upgraded Ventilation Structure】This facial interface is compatible with Oculus Quest 3S, conforms to the air circulation principle and ergonomic structure, not only can it perfectly fit different face shapes, but also has a fan on the top to effectively keep the face cool and reduce lens fogging in VR games.
- 【2 Different Styles of Face Pads】Breathable lce Silk Cotton Pad: The Meta Quest 3S facial interface made of soft, breathable and skin-friendly ice silk cotton material, cool fiber can effectively remove excess heat from the body surface, reduced sweating. And 0.63'' thickened ice silk cotton cover can well reduce the pressure on the face, better for intense VR games or sports experiences.
- 【2 Different Styles of Face Pads】PU Leather Pad: This Meta Quest 3S face cover is made of high-quality PU leather, which is more comfortable and soft like a pillow, sweat-proof and easy to clean, making it convenient to use alternately with friends and family. The 0.63'' thickened sponge foam can well relieve facial pressure, making longer VR experiences more comfortable.
- 【2 Speeds & High-power Battery】The Meta Quest 3S cooling fan has two speeds: Ⅰ speed simulates natural wind, no noise, and can effectively prevent lens fogging in winter or air-conditioned environment, the Ⅱ speed is strong wind, bringing a cool feeling. And it has a built-in 700mah battery that lasts from 2 hours 40 minutes (in mode II) to 3 hours 30 minutes (in mode I) and can be fully recharged in one hour, so that your lens can always remain clear whether indoors or outdoors.
- 【Quick to Install and Replace】All you need to do is take off the original meta quest 3S face pad, put on ours, and finally align the Oculus Quest 3S fan with the two holes on the top and plug it in to start using. The Velcro design of the Quest 3S face cover allows you to easily remove the ice silk cotton or PU leather, so you can replace it at any time and freely choose which cushion you want to use.
- 【What you'll get】Breathable facial interface *1, 2-speeds cooling fan *1, breathable ice silk cotton *1, PU leather pad *1, removable silicone light-blocking nose guard*1 and HiBloks 24 hours after-sales service, if you are not Satisfied with the meta quest 3S silicone facial interface for Any Reason, please feel free to contact us, we will do our best to answer you!
Full Specifications
| Brand | RCGEEK |
|---|---|
| Color | Quest 3S fan |
| Platform | Meta Quest |
| Resolution | 1832 x 1920 per eye |
| Unit Count | 3 Count |
| Display Type | LCD |
| Model Number | Quest 3S |
| Built-In Media | Face Cover, cooling fan |
| Connector Type | HDMI |
| Controller Type | Button Control |
| Battery Capacity | 700 milliamp_hours |
| Sensor Technology | Inside-out tracking |
| Compatible Devices | Meta Quest 3S |
| Additional Features | Cooling Fan, Breathable Face Pads, Dual Speed Fan, Long-lasting Battery |
| Battery Average Life | 3.17 hours |
| Warranty Description | 12 month |
| Age Range Description | Adult |
| Connectivity Technology | HDMI |
| Specific Uses For Product | Gaming, Entertainment |
| Display Maximum Resolution | 1832 x 1920 per eye |
| Full listing title | HiBloks Facial Interface with Cooling Fan for Meta Quest 3S Accessories | 2Pcs Face Cover Pad with Fan Cooler for Meta/Oculus Quest 3S, Replacement Facial Interface Relieve Lens Fogging (2 Speeds) |
Ready to buy?
HiBloks Facial Interface with Cooling Fan for Meta Quest 3S Accessories | 2Pcs Face Cover Pad with Fan Cooler for Meta/Oculus Quest 3S, Replacement Facial Interface Relieve Lens Fogging (2 Speeds) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Qwen-Image-3.0 on an RTX 3060 12GB: Local Text-in-Image Gen
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Aider vs Cline vs Continue on a Local Coding Rig (RTX 3060, 2026)
- How to run Qwen 3 32B on Apple M4 (2026)
- Best Gaming Mouse Pad for Esports and Productivity (2026)
- Ryzen AI Max Mini-ITX: Framework Desktop Specs Explained
- How to run Llama 3.1 8B on Apple M4
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- Watercooled Gaming/Networking Rack: 2025 Build Guide
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- Cactus Hybrid Router: Gemma4-2B Local + Gemini Fallback
- CompactFlash to IDE Adapter Won't Boot on Windows 98: Troubleshooting Guide 2026
- Blue Yeti vs HyperX QuadCast 2 S: Best USB Mic for New Streamers
- Skytech Prism 4 vs MSI Codex Z2: Which Prebuilt Wins at 1440p?
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- Best Cooling Solutions for Modern Gaming PCs (2026)
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
- Train Your Own LLM From Scratch: 2026 Hardware Guide
- Sound BlasterX G6 on a Retro Windows XP Rig: USB Audio for Period-Correct Builds
- OpenAI Launches ChatGPT Work: An Agent for Whole Workflows
- GameSir G7 SE vs DualSense vs 8BitDo Pro 2 for PC Gaming in 2026
- The Truth About Sega's TradeMark Security System (TMSS)
- Logitech G29 vs HORI Force Feedback Wheel — Which First Wheel Is Right?
- RTX 3060 Driver Crashes and Stuttering: Troubleshooting Guide (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090