Pixio PS1D Wave Mint Green Dual Monitor Arm Stand Desk Mount
Bottom line: The Pixio PS1D Wave Mint Green Dual Monitor Arm Stand Desk Mount ($99.99 on Amazon as of 2026-10-07): Holds two monitors up to 32 inches each, 19.8 lbs per arm; main trade-off: 19.8 lb per-arm limit rules out heavier 32-inch ultrawides.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Holds two monitors up to 32 inches each, 19.8 lbs per arm
- ✓ Fits both 75x75mm and 100x100mm VESA plates
- ✓ Full height, tilt, swivel, and pivot adjustment on each arm
- ✓ Screwless cable management channels slide in and out
Cons
- ✗ 19.8 lb per-arm limit rules out heavier 32-inch ultrawides
- ✗ Only 75x75 and 100x100 VESA supported, no 200x100 panels
- ✗ Mint green finish clashes with all-black desk setups
- ✗ Dual-arm design needs deep clamp space at the desk edge
SpecPicks Verdict
SpecPicks scored Pixio PS1D Wave Mint Green Dual Monitor Arm Stand Desk Mount using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Pixio's home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Dual Monitor Setup - Accommodates two monitors up to 32 inches each and supports up to 19.8 lbs per arm. Each arm has a plate that can support 75x75mm and 100x100mm VESA mounting patterns.
- Ergonomic Viewing Position - Offers smooth height adjustment, tilt, swivel, and pivot functions, allowing you to find the perfect viewing angles for both monitors.
- Streamlined Organization - Keeps your desk clutter-free and organized with the integrated cable management system. No screws are necessary, just slide these pieces in and out of position to manage your monitor's cables!
- Universal Compatibility - Ensures compatibility with most monitors using the industry-standard VESA mounting holes. The VESA plates accommodate 75x75mm and 100x100mm mounting patterns.
- Sophisticated Design - Provides both durability and style, enhancing both functionality and aesthetics in your workspace. Choose among many available colors to match your vibe.
Full Specifications
| Brand | Pixio |
|---|---|
| Color | Mint Green |
| Material | Metal |
| Model Number | PSW1DMT |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating |
| Mfr Part Number | PSW1DMT |
| Compatible Devices | Monitor |
| Enclosure Material | Metal |
| Maximum Tilt Angle | 45 Degrees |
| Warranty Description | 3 Year Limited Warranty |
| Maximum-Supported Screen Size | 32 Inches |
| Minimum-Supported Screen Size | 17 Inches |
| Full listing title | Pixio PS1D Wave Mint Green Dual Monitor Arm Stand Desk Mount - Fits up to 32 inches Monitors and up to 19.8lbs. VESA Compatibility and Integrated Cable Management |
Ready to buy?
Pixio PS1D Wave Mint Green Dual Monitor Arm Stand Desk Mount - Fits up to 32 inches Monitors and up to 19.8lbs. VESA Compatibility and Integrated Cable Management is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
More reviews from the SpecPicks archive
Browse all reviews →- RTX 5090 vs RTX 4080: Specs, Gaming & AI Compared
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090
- Raspberry Pi 5 8GB Review (2026): Still the SBC to Beat
- Best GPU for 1080p Esports in 2026: Why the RTX 3060 12GB Still Delivers
- Ollama on a 12GB RTX 3060: Best Models and tok/s in 2026
- Best Storage Upgrades for Retro and Budget PC Builds in 2026
- CompactFlash as Your IDE Hard Drive: A Silent, Reliable Retro PC Boot Disk
- Stable Diffusion vs Flux — which open image model wins in 2026?
- 2026 Homelab Stack: OPNsense + Proxmox + TrueNAS + 10GbE
- Intel Arc Pro B60 24GB vs RTX 3060 12GB: the VRAM math
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Intel Arc vs NVIDIA 2026: Local LLM Tokens per Dollar
- Best USB Microphone for Game Streaming on Twitch (2026)
- Jellyfin NVENC Transcodes + a Local LLM on One RTX 3060 12GB
- AI-Driven Driver Install on WinXP: Vision LLM Walks the Audigy FX Setup
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- RTX 5090 vs RTX 4090 at 1080p Competitive: Does the New Flagship Help Esports FPS?
- Raspberry Pi OS Moves to Linux 6.18 LTS: What the Kernel Jump Means for Pi 4 Owners
- Best Controller for Retro Emulation and Indie Gaming in 2026
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Network-Wide Ad Blocking with Pi-hole on a Raspberry Pi 4 8GB (2026 Setup)
- Is the RTX 3060 12GB Still a Good 1080p Gaming GPU in 2026?
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090