GeeekPi Metal Case
Status: GeeekPi Metal Case with N07 PCIe M.2 M-Key NVMe…: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.
Bottom line: The GeeekPi Metal Case is a specs-and-price decision rather than a crowd-consensus one in the single-board computers category. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:
Similar: Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 — $9.95 on Amazon as of 2026-10-25 22:16 UTC (price may vary).
Similar: GeeekPi N04 M.2 NVMe to PCIe Adapter for… — $12.90 on Amazon as of 2026-10-25 10:13 UTC (price may vary).
Similar: GeeekPi DeskPi Lite Pi5 Case with Power Button — $35.99 on Amazon as of 2026-10-25 16:14 UTC (price may vary).
Pros & Cons
Pros
- ✓ Backed by GeeekPi's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
About this item This kit includes N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board, metal case and active cooler for Raspberry Pi 5. N07 PCIe M.2 M-key NVMe SSD PIP Peripheral Board is only compatible with Raspberry Pi 5 8GB 4GB board. Note: Raspberry Pi 5 board is not included. N07 PCIe Hat is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280. Metal case case access to most ports of Raspberry Pi and protect Pi board from dust and damage. Ventilation hole design of metal case provides excellent ventilation airflow for cooling…
SpecPicks Verdict
SpecPicks scored GeeekPi Metal Case using a rating × review-volume × price-fit model applied to published specs and reviews across the single-board computers category. GeeekPi's single-board computers lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for single-board computers of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- This kit includes N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board, metal case and active cooler for Raspberry Pi 5.
- N07 PCIe M.2 M-key NVMe SSD PIP Peripheral Board is only compatible with Raspberry Pi 5 8GB 4GB board. Note Raspberry Pi 5 board is not included.
- N07 PCIe Hat is a bottom-mounted adapter and it supports the installation of M.2 M-key NVMe SSD 2230/2242/2260/2280.
- Metal case case access to most ports of Raspberry Pi and protect Pi board from dust and damage.
- Ventilation hole design of metal case provides excellent ventilation airflow for cooling. Official active cooler for better cooling effect.
Full Specifications
| ASIN | B0DL2DFZQ7 |
|---|---|
| Brand | GeeekPi |
| Color | Black |
| Material | Metal |
| Case Type | Raspberry Pi |
| Model Name | N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board |
| Manufacturer | GeeekPi |
| Model Number | N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board |
| Built-In Media | N07 Kit |
| Cooling Method | Air |
| Number of Fans | 1 |
| Special Feature | Active Cooler and M.2 NVMe SSD Support |
| Antenna Location | General Purpose |
| Compatible Devices | Single-board computers (Raspberry Pi 5), M.2 NVMe SSD (2230, 2242, 2260, 2280) |
| Enclosure Material | Metal |
| Warranty Description | 6 months |
| Hard Disk Form Factor | 22 Millimeters |
| Supported Motherboard | Mini ITX |
| Motherboard Compatability | Mini ITX |
| Power Supply Mounting Type | Bottom Mount |
| Full listing title | GeeekPi Metal Case with N07 PCIe M.2 M-Key NVMe SSD PCIe Peripheral Bottom Board for Raspberry Pi 5, Support M.2 Key-M NVMe SSD 2230/2242/2260/2280 (with Active Cooler) |
Hardware benchmark data
Ready to buy?
Amazon shows no buyable offer for GeeekPi Metal Case with N07 PCIe M.2 M-Key NVMe… at the last check. A similar in-stock product is Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Single-Board Computers
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget 4K Gaming Monitor Under $400 in 2026: SANSUI vs KOORUI Mini-LED
- Sound Blaster X G6 on a Windows XP Retro Gaming PC: Worth It?
- Samsung 870 EVO vs Crucial BX500: Best Budget SATA SSD for a 2026 Build
- Voodoo5 5500 PCI Boots on Modern ASUS P8Z77-V Pro — A Look at Retro GPUs in 2026 Boards
- Best Streaming Gear for PC Gamers in 2026
- Adafruit Reverse-Engineers the Creative Katana V2X Soundbar
- Mount a 90s Big-Box CD-ROM ISO on Win98 Without a CD Drive
- Best Gaming Mouse Pad for Competitive FPS in 2026: 5 Picks Ranked by Glide, Tracking, and Sweat Resistance
- AI-Driven Driver Install on WinXP: Vision LLM Walks the Audigy FX Setup
- Building a period-correct Windows 98 gaming rig in 2026
- Qwen 3.6 35B-A3B on a 16GB GPU: RTX 5060 Ti vs RX 9060 XT Quant Table
- llama.cpp on Snapdragon Hexagon NPU: First Real Benchmarks and What Actually Works
- 8BitDo Pro 2 on Win98 SE and WinXP: Mapping a Modern Bluetooth Pad to DOSBox, Glide Games, and…
- Radeon Pro W7900 48GB vs RTX A6000 48GB for Local 70B Inference (2026)
- Best GPU for AI Workstations in 2026
- Ryzen 5 5600G vs Ryzen 7 5700X: Which for a Budget 1080p Build?
- AMD Ryzen AI Max+ 395 vs Mac Studio M4 Max for Local LLM Inference
- Raspberry Pi 4 8GB as a Local LLM Box: What Models Actually Run?
- M3 Ultra vs RTX 4090 for local LLMs
- RTX 3060 12GB vs RTX 4070 12GB for Qwen2.5 14B (2026)
- Leanstral 1.5 on the RTX 3060 12GB: Open Math and Code on a Budget GPU
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Gaming
- Ryzen 7 5800X vs Ryzen 5 5600G for 1080p Gaming and Light Local LLM Work
- Best GPU for ComfyUI and SDXL Under $400 in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090