ARCTIC Liquid Freezer III Pro 360 A-RGB
Bottom line: The ARCTIC Liquid Freezer III Pro 360 A-RGB ($76.99 on Amazon as of 2026-10-06): Thick 38 mm radiator adds cooling capacity over thinner 360 mm AIOs; main trade-off: 38 mm radiator plus fans needs extra case clearance; measure before buying.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Thick 38 mm radiator adds cooling capacity over thinner 360 mm AIOs
- ✓ Three P12 Pro fans, rated quieter than P12 at low RPM with higher top speed
- ✓ Contact frame for Intel LGA1851/1700 evens out CPU mounting pressure
- ✓ Offset cold plate sits over the CPU hotspot on both AMD and Intel
Cons
- ✗ 38 mm radiator plus fans needs extra case clearance; measure before buying
- ✗ Needs a 360 mm (3 x 120 mm) radiator mount, which rules out many compact cases
- ✗ Fan cables are built into the tube sleeve, so swapping fans is harder
- ✗ VRM fan is an extra small moving part on the pump block
Manufacturer description
The ARCTIC Liquid Freezer III Pro 360 A-RGB is a 360 mm AIO CPU cooler for high-core-count AMD and Intel builds that run hot under sustained load. It uses three 120 mm P12 Pro fans on a thick 38 mm radiator. ARCTIC says the P12 Pro runs quieter than the standard P12 at low speeds and reaches a higher top speed when your CPU is under heavy load. The cooler supports AMD AM5/AM4 and Intel LGA1851/LGA1700. Intel builds get a contact frame that spreads mounting pressure more evenly than the stock retention mechanism. On both platforms, native offset mounting shifts the cold plate toward the CPU…
SpecPicks Verdict
SpecPicks scored ARCTIC Liquid Freezer III Pro 360 A-RGB using a rating × review-volume × price-fit model applied to published specs and reviews across the cooling & fans category. ARCTIC's cooling & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for cooling & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Which CPU sockets does the ARCTIC Liquid Freezer III Pro 360 support?
The listing covers AMD AM5 and AM4 plus Intel LGA1851 and LGA1700. Intel installs include a contact frame. Other sockets are not listed, so check ARCTIC's compatibility page before buying for an older platform.
Will a 38 mm thick radiator fit in my case?
Only if your case has a 360 mm (3 x 120 mm) radiator mount with room for the 38 mm radiator plus the fans. Standard radiators are about 27 mm thick, so check your case's rated radiator clearance, especially for top mounting near RAM and VRM heatsinks.
What does the VRM fan on the pump do?
It is a PWM-controlled fan built into the pump block that blows air over the motherboard's voltage regulators around the CPU socket. A standard AIO removes the airflow a tower cooler would give that area, and this fan puts it back.
Is the Liquid Freezer III Pro 360 loud?
It uses three ARCTIC P12 Pro fans, which ARCTIC describes as quieter than the standard P12 at low speeds and faster at the top end. The fans are PWM-controlled, so you can set a quieter fan curve in your BIOS.
Key Features
- CONTACT FRAME FOR INTEL LGA1851 | LGA1700: Optimized contact pressure distribution for a longer CPU lifespan and better heat dissipation
- ARCTICS P12 PRO FAN: More performance at every speed – especially more powerful and quieter than the P12 at low speeds. Higher maximum speed for optimal cooling performance under high loads
- NATIVE OFFSET MOUNTING FOR INTEL AND AMD: Shifting the cold plate center toward the CPU hotspot ensures more efficient heat transfer
- INTEGRATED VRM FAN: PWM-controlled fan that lowers the temperature of the voltage regulators, ensuring reliable performance
- INTEGRATED CABLE MANAGEMENT: The PWM cables of the radiator fans are integrated into the sleeve of the tubes, so only a single visible cable connects to the motherboard
Full Specifications
| Brand | ARCTIC |
|---|---|
| Color | Black |
| Model | LFIII Pro 360 A-RGB nero |
| Voltage | 12 Volts |
| Wattage | 3.96 watts |
| Material | Copper, Metal, Plastic, Rubber |
| Unit Count | 1.0 Count |
| Part Number | ACFRE00184A |
| Material Type | Copper, Metal, Plastic, Rubber |
| Cooling Method | Liquid |
| Number of Items | 1 |
| Air Flow Capacity | 77 Cubic Feet Per Minute |
| Compatible Devices | Cpu |
| INTEGRATED VRM FAN | PWM-controlled fan that lowers the temperature of the voltage regulators, ensuring reliable performance |
| Included Components | Item |
| Power Connector Type | 4-Pin |
| Warranty Description | 6 years |
| Maximum Rotational Speed | 3000 RPM |
| Item Dimensions L x W x H | 15.7"L x 4.7"W x 2.9"H |
| INTEGRATED CABLE MANAGEMENT | The PWM cables of the radiator fans are integrated into the sleeve of the tubes, so only a single visible cable connects to the motherboard |
| Full listing title | ARCTIC Liquid Freezer III Pro 360 A-RGB - AIO CPU Cooler, 3 x 120 mm Water Cooling, 38 mm Radiator, PWM Pump, VRM Fan, AMD AM5/AM4, Intel LGA1851/1700 Contact Frame - Black |
Ready to buy?
ARCTIC Liquid Freezer III Pro 360 A-RGB - AIO CPU Cooler, 3 x 120 mm Water Cooling, 38 mm Radiator, PWM Pump, VRM Fan, AMD AM5/AM4, Intel LGA1851/1700 Contact Frame - Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Cooling & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Best Budget Upgrades to Revive an Old Gaming PC in 2026
- AMD Ryzen AI Max+ 395 Box (Strix Halo) for Local LLMs: What 128GB Unified Memory Actually Buys You
- Best Plug-and-Play Retro Console and Handheld to Buy in 2026: 5 Ranked Picks
- Best Budget Streaming & Content-Creation Gear in 2026: 5 Picks That Punch Above Their Price
- US Forces Anthropic to Disable Claude Fable 5: Local Fallbacks
- Two GTX 1050 Ti 4GB vs One RTX 3060 12GB for 8B Local LLMs
- CUDA 13.3 Landed: What Local LLM Operators Need to Know for RTX 3060 / 4090 Rigs
- Second Streaming PC vs NVENC: What an Old i7-9700K Is Still Good For
- Best Budget Gaming Setup Essentials for 2026: Mouse, Keyboard, Headset, Mic & Mousepad
- Ryzen 7 5800X vs 5700X for 1080p High-Refresh Gaming
- Best Raspberry Pi for a Touchscreen Home Dashboard in 2026
- Why Preassembled PCs Beat DIY Builds in 2026
- Mini-ITX Gaming PC in a 3D Printed Case: 2026 Builder's Guide
- What Does DPS Mean in Gaming? Damage Per Second Explained
- Microsoft's SkillOpt Boosts Models With Just a Markdown File — What It Means for Your Local RTX 3060 Rig
- KOORUI 27" 4K vs Samsung Odyssey 27" 4K for PS5 and PC Gaming
- Qwen3.6 35B A3B on RTX 3060 12GB: 80 tok/s with llama.cpp MTP
- Best Mechanical Keyboard for Office and Hybrid Coding in 2026
- Running a Local LLM on a Raspberry Pi 5 With llama.cpp: Real tok/s on 1B-8B Models
- DeepSeek V4 Flash on a 12GB RTX 3060: The Cheapest Agentic Model, Run Local
- Inside the Creative Katana V2X Soundbar Teardown — and What It Says About Sound Blaster
- Turning a Broken Steam Deck Into a 2.5GbE NAS
- Ryzen 5 5600G vs Ryzen 7 5700X: Which for a Budget 1080p Build?
- Intel Core Ultra 7 270K Plus: Dual-Channel Memory Scaling Tested
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090