BAKON BK8586MX 2-in-1 Hot Air Rework Station and Soldering Station
Bottom line: Per its Amazon listing, the BAKON BK8586MX 2-in-1 Hot Air Rework Station and Soldering Station: the hot air soldering station uses 940W; the total output power is 1000W.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ The hot air soldering station uses 940W
- ✓ The total output power is 1000W
- ✓ Backed by BAKON's warranty and support channels
Cons
- ✗ Check battery runtime and RPM/CFM specs match your case size and cleaning frequency
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for BAKON BK8586MX 2-in-1 Hot Air Rework Station and Soldering Station, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 【2-IN-1】 BAKON 2-in-1 rework station integrates two functions of soldering station and hot air rework station, 1000W high power output, rapid temperature rise, 1000W high power output, rapid temperature rise, this machine features LED temperature dual display, dual power switch, temperature, air volume adjustment buttons, ℃ / ℉ switching, precise temperature, temperature compensation.
- 【Practical features]】ultra fine tip soldering station, and the use of plug-in heating core (BC210), easy to replace the heating core; hot air rework station using a large gas flow, brushless blower air supply, low noise and no noise. hot air station is not in use, the handle is placed on the air gun bracket, the hot air soldering station automatically dormant cooling.solder station built-in microcomputer, accurate temperature calibration, temperature control without error.
- 【Temperature Adjustable】 Our desoldering station uses 60W of power and has an adjustable temperature range of 365℉-896℉ (180℃-480℃). The hot air soldering station uses 940W, with an adjustable temperature range of 212℉-932℉ (100℃-500℃). The total output power is 1000W,high power and fast heating to provide your working efficiency.
- 【Precision Soldering Station】2 in 1 soldering station is suitable for manufacturing, scientific research, education and other fields to solder all kinds of precision electronic components, hardware high soldering projects, repair circuit boards, metal, DIY and so on. Our soldering station kit can be set up with a password to effectively prevent unauthorized operation and reduce security risks, this soldering station meets the needs of all industries.
- Choose BAKON, the soldering iron station kit enjoys our exclusive 1 year technical support, our professional team provides you 24/7 team service on Amazon, please feel free to use and upgrade your tools. The working voltage is 110V standard voltage in the United States.
Full Specifications
| Brand | BAKON |
|---|---|
| Display | LED |
| Voltage | 110 Volts (AC) |
| Wattage | 1000 watts |
| Display Type | LED |
| Model Number | BK8586MX |
| Compatibility | Switch |
| Number of Channels | 2 |
| Included Components | Soldering Station |
| Temperature Stability | 180 to 500 degrees_celsius |
| Manufacturer Part Number | WF-OFWZ-67TY |
| Full listing title | BK8586MX 2-in-1 Hot Air Rework Station and Soldering Station, Portable High Power SMD Rework Station, Fast heat up, Precise temperature control, Noise reduction design, ºC/ºF conversion |
Ready to buy?
BK8586MX 2-in-1 Hot Air Rework Station and Soldering Station, Portable High Power SMD Rework Station, Fast heat up, Precise temperature control, Noise reduction design, ºC/ºF conversion is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Building a Period-Correct 1998 Voodoo2 SLI Win98 Gaming PC in 2026: Parts, Boot Media, and Glide Setup
- ComfyUI on an RTX 3060 12GB: Local Image Generation Setup
- 1080p Gaming PC Build 2026: Cost, Parts, FPS
- 1440p High-Refresh vs 4K for Gaming in 2026: ASUS TUF 27" QHD vs SANSUI/KOORUI 4K
- Best Gaming GPUs for 1080p High-Refresh Rate (2026)
- GeForce FX 5900 Ultra Period-Correct WinXP Build Guide: Driver Hunt, Half-Life 2 Mixed-Mode, and Doom 3…
- RX 9060 XT 16GB vs 8GB: Which One to Buy (Benchmarks)
- N100 Mini PC vs Raspberry Pi 4 for Home Assistant in 2026
- Building a CompactFlash + IDE Storage Stack for Win98 and WinXP Retro Rigs
- Ternary Text-to-Image: Running Bonsai 4B on a 12GB RTX 3060
- Building a 2003-Era LAN Party Rig: Pentium 4, GeForce FX 5900, Audigy 2 ZS
- 2026 Homelab Stack: OPNsense + Proxmox + TrueNAS + 10GbE
- GTX 1050 Ti vs Ryzen 5 2600 for Gemma 3 1B and Llama 3.2 1B
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Best Budget Gaming CPU Under $250 in 2026
- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
- Kimi K3 Lands #5 on Coding Agents: What You Can Actually Run Local
- ExLlamaV2 vs llama.cpp for Single-User Chat on an RTX 3060 12GB in 2026
- OpenAI Says 'Chat Is Dead': Building a Local Agent Rig in 2026
- Noctua NH-U12S vs ML240L RGB on a Ryzen 7 5800X
- Retro Game Emulator for TV: 2025 Setup & GPU Guide
- The Sound Blaster Monopoly: How Creative Still Shapes Retro PC Audio in 2026
- CompactFlash as a Boot Drive: Silent Storage for a Period-Correct Retro PC (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090