APEXINNO Facial Interface Face Pad Cover Compatible with Meta Quest 3S Accessories
Bottom line: Per its Amazon listing, the APEXINNO Facial Interface Face Pad Cover: 6.Glasses-Friendly:Fits glasses with length ≤ 4.96 inches and width ≤ 1.73 inches.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 6.Glasses-Friendly:Fits glasses with length ≤ 4.96 inches and width ≤ 1.73 inches
- ✓ Backed by APEXINNO's warranty and support channels
Cons
- ✗ Check the listed dimensions, connectors and platform compatibility against your setup before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for APEXINNO Facial Interface Face Pad Cover, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the vr headsets & accessories category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 1.Provides Two Different Material Cushions:Ice-silk pad for cooling and breathability,and PU leather pad for soft,sweat-resistant comfort,interchangeable according to different needs
- 2. Ventilation Design:Features a special airflow structure to improve circulation,reduce lens fog,and minimize heat buildup during VR gameplay
- 3.Relieves Facial Pressure:Face pads use memory foam for a soft,skin-friendly fit that reduces facial fatigue during extended Quest 3S gaming
- 4.Easy to Clean:The PU leather pad resists sweat and stains for easy wiping,while the ice-silk pad dries quickly after use,helping keep your Quest 3s clean and fresh
- 5.Simple Installation:Easily install and adjust the facial interface for a secure fit,suitable for most face shapes during VR gameplay
- 6.Glasses-Friendly:Fits glasses with length ≤ 4.96 inches and width ≤ 1.73 inches,suitable for VR players who wear eyewear
Full Specifications
| Brand | APEXINNO |
|---|---|
| Color | Black |
| Platform | Meta Quest |
| Resolution | 1832 x 1920 per eye |
| Model Number | Meta Quest 3S |
| Built-In Media | Facial Interface |
| 4.Easy to Clean | The PU leather pad resists sweat and stains for easy wiping,while the ice-silk pad dries quickly after use,helping keep your Quest 3s clean and fresh |
| Controller Type | Motion-sensing controller |
| Mfr Part Number | YL03 |
| Special Feature | Easy to Clean, Premium Silicone Anti-Leakage Nose Pad, Skin-friendly, Two Easily Replaceable Pads in Different Materials, Ventilation Design |
| Sensor Technology | Inside-out tracking Accelerometer Gyroscope Magnetometer |
| 6.Glasses-Friendly | Fits glasses with length ≤ 4.96 inches and width ≤ 1.73 inches,suitable for VR players who wear eyewear |
| Compatible Devices | Meta Quest 3S |
| 10.Package contains | Includes 1× facial interface frame,1× PU pad,1× ice-silk pad,1× silicone nose pad,1× lens protector |
| Additional Features | Easy to Clean, Premium Silicone Anti-Leakage Nose Pad, Skin-friendly, Two Easily Replaceable Pads in Different Materials, Ventilation Design |
| Included Components | Facial Interface |
| 9.Enhanced Immersion | Cushions and nose pad create a secure,comfortable fit during VR sessions |
| 2. Ventilation Design | Features a special airflow structure to improve circulation,reduce lens fog,and minimize heat buildup during VR gameplay |
| 5.Simple Installation | Easily install and adjust the facial interface for a secure fit,suitable for most face shapes during VR gameplay |
| 7.Detachable Nose Pad | Silicone nose pad blocks external light for enhanced immersion and comfort on Meta Quest 3S |
| Full listing title | APEXINNO Facial Interface Face Pad Cover Compatible with Meta Quest 3S Accessories,Including 2 Pcs Face Pad Replacement,Light Pad and Lens Cover Only for Meta Quest 3S |
Ready to buy?
APEXINNO Facial Interface Face Pad Cover Compatible with Meta Quest 3S Accessories,Including 2 Pcs Face Pad Replacement,Light Pad and Lens Cover Only for Meta Quest 3S is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related VR Headsets & Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Kimi K3 Just Launched: What You Can (and Can't) Run Locally Instead
- AMD Ryzen 7 5800X3D Re-Review Shows DDR4 Still Has Gaming Legs in 2026
- Llama 3.3 70B: Dual RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- Windows XP Gaming Laptops in 2026: A Realistic Buying Guide
- Grok Imagine 1.5 Shipped 720p Video — Run Local Image/Video Gen Instead
- Why That Game Boy Clone Runs Too Fast — and the Crystal Fix
- RTX 3060 12GB vs RTX 4070 Super for Local LLMs (2026): Same VRAM, 40% More Bandwidth
- Open-Source NVIDIA NVK Vulkan Driver Now Supports DLSS
- llama.cpp MTP support landed - Qwen3.6 27B at 2.44× on a Strix Halo, 2.17× on a RTX 3090 rig
- Ryzen 7 5700X vs Intel Core i7-9700K: Best Budget Gaming CPU in 2026
- 3dfx Voodoo5 5500 AGP tuning guide — 2026 edition
- Stable Diffusion vs Flux — which open image model wins in 2026?
- Raspberry Pi Zero 2 W Powers a Privacy-First Ring-Camera Alternative
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- CompactFlash Boot Drive for a Win98 / XP Retro PC (2026 Guide)
- Building a 2001 LAN Party Rig in 2026: GeForce 3, Pentium III, and Period-Correct Peripherals
- SATA SSD vs NVMe for a Ryzen 5 5600G Budget Build in 2026
- Sega's TMSS Explained: The Lock-Out Chip Behind the Genesis, and Why It Still Trips Up Reissues
- GameSir G7 SE vs DualSense for PC Gaming in 2026
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- Best SATA SSD for a PS4 Slim and Emulation Box in 2026
- Raspberry Pi Projects on GitHub: 2025 Guide
- Retro Games With 1:1 Remakes: The Faithful Rebuild List
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 With Free Cooler
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090