JRready ST6558 Molex Crimping Tool Kit
Bottom line: The JRready ST6558 Molex Crimping Tool Kit is a specs-and-price decision rather than a crowd-consensus one in the power supplies & cables category, priced around $123.50 on Amazon as of 2026-10-06. Check the specification table below against one or two close alternatives — on price and spec fit, not on star ratings.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Backed by JRready's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks scored JRready ST6558 Molex Crimping Tool Kit using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies & cables category. JRready's power supplies & cables lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- Professional Crimping Tool:ACT-LY-JRN001 is designed specifically for JRN001 (MLX 6.35 series) terminals. Made from high-strength steel for accurate crimping and a firm grip. Ideal for DIY electronics, automotive wiring, and electrical repairs.
- Upgraded Pin Removal Tool:JRconDRK-T280320-01 features a push-rod design for quick and safe terminal removal, especially from connectors with short or no wires, without damaging the housing.
- High-Quality JRN001 Connectors:JRN001 connectors (6.35mm pitch) are made from durable PA66, support 12–24 AWG wires with up to 13.5A current, operate at -40°C to +105°C, and meet UL94-V2 flame retardancy. Rated for 100+ mating cycles. Slight discoloration from air exposure won’t affect performance. Contact us anytime for help.
- Premium Terminals:The JRN001-TBM/TBF terminals (14–20 AWG) are made from tin-plated brass for superior conductivity and corrosion resistance. Includes 150 pairs—great for practice or spares, especially for beginners.
- Complete Kit:Includes crimping tool, pin removal tool, 2/3/6/9/12-pin connector housings, and full terminal sets—no need for separate purchases. Ideal for building or repairing wire harnesses efficiently and cost-effectively.
Full Specifications
| Brand | JRready |
|---|---|
| Color | Mlx 6.35 Series Electrical Connector |
| Set Name | Kit |
| Grip Type | Ergonomic |
| Unit Count | 350.0 Count |
| Handle Type | Standard Ergonomic Handle |
| Model Number | ST6558 |
| Handle Material | Metal |
| Manufacturer Part Number | ST6558 |
| Specific Uses For Product | DIY electronics, automotive wiring, electrical repairs |
| Full listing title | JRready ST6558 Molex Crimping Tool Kit with MLX Connector 2-12Pin Power Connectors Housing Receptacle Plug 42023 Series Contacts 02082004/02082002 2.13mm Diameter Crimp Terminal 14-20AWG 350PCS |
Ready to buy?
JRready ST6558 Molex Crimping Tool Kit with MLX Connector 2-12Pin Power Connectors Housing Receptacle Plug 42023 Series Contacts 02082004/02082002 2.13mm Diameter Crimp Terminal 14-20AWG 350PCS is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-06. Price and availability subject to change.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Logitech Extreme 3D Pro vs DualSense for Flight and Space Sims in 2026
- RetroArch PS3 Emulation: What Actually Works in 2026
- How to Archive Your Old IDE and CompactFlash Retro PC Drives in 2026
- How to Identify Your Motherboard: A Step-by-Step Guide
- G4-Meromero 31B: Running the Uncensored Gemma 4 Finetune on a 12GB RTX 3060
- Gemma 3 12B vs Qwen2.5 14B on a 12 GB RTX 3060: Which Fits, Which Is Faster
- Retro Console on a Modern TV: Fix the Blur (2026 Guide)
- ASUS ProArt PA27USD Lands: 27-Inch OLED Aims at Gaming
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
- Imaging a vintage IDE hard drive with a USB adapter in 2026
- Best GPU Upgrade From a GTX 1050 Ti for Local LLMs in 2026
- 3dfx Voodoo2 SLI in 2026: Building a Period-Correct Windows 98 Glide Rig
- Best Webcam for PC Game Streaming Under $100 (2026)
- Renting AI Compute vs Running It Home: The RTX 3060 Math
- Raspberry Pi AI HAT+ Hits 26 TOPS for On-Device Inference
- Can the RTX 3060 12GB Still Game at 1440p in 2026?
- Best GPU for Gemma 3 27B in 2026: Where 12 GB Stops Being Enough
- Can a Raspberry Pi 4 8GB Run a Local LLM? Ollama Tiny-Model Benchmarks
- Best Cooler for a Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Moonshot AI Targets $30B: Can You Run a Kimi-Class Open Model on a 12GB GPU?
- Best CPU Cooler for Ryzen 7 5800X & AM4 Overclocking (2026)
- Building a 1999 GeForce 256 + Pentium III Win98 Rig in 2026
- Best Budget GPU for Local LLMs in 2026: RTX 3060 12GB vs the Alternatives
- Sound Blaster on a Retro Gaming PC: Period-Correct Audio and the Modern G6 Bridge
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090