Exqutoo 620Pcs M3 Male Female Hex Standoffs Screws Assortment Kit
Bottom line: The Exqutoo 620Pcs M3 Male Female Hex Standoffs Screws Assortment Kit: 620 pieces: 220 standoffs, 180 nylon screws, 110 washers, 110 nuts; main trade-off: nylon only; no brass or steel for high-heat or heavy loads.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 620 pieces: 220 standoffs, 180 nylon screws, 110 washers, 110 nuts
- ✓ Nylon insulation guards PCBs against short circuits and rust
- ✓ 24-compartment organizer labeled by length and quantity
- ✓ Four lengths (6/10/15/20mm) fit PCBs, 3D printers, FPV drones
Cons
- ✗ Nylon only; no brass or steel for high-heat or heavy loads
- ✗ Male thread height fixed at 6mm, limiting tall standoff stacks
- ✗ M3 thread only; no M2 or M2.5 for smaller boards
- ✗ Nylon threads strip easier than metal if over-torqued
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Exqutoo 620Pcs M3 Male Female Hex Standoffs Screws Assortment Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the motherboards category before committing. On the listing's own facts, the case for it is "620 pieces: 220 standoffs, 180 nylon screws, 110 washers, 110 nuts"; the main trade-off is "Nylon only; no brass or steel for high-heat or heavy loads". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for motherboards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 620Pcs M3 Hex Standoff Kit: Includes 110pcs female standoffs and 110pcs male-female standoffs (6/10/15/20mm, male thread height 6mm not included), 180pcs M3 nylon screws (6/10/15/20mm), plus 110pcs washers and 110pcs nuts, total 620pcs for PCB and hardware assembly
- Durable Nylon Material: Made of high-quality nylon, lightweight yet strong, with excellent insulation, corrosion resistance, and wear resistance, helping protect electronic components from rust and ensuring long-lasting performance
- Precise Thread & Easy Installation: Features standard M3 threading for secure fastening and easy assembly with common tools, ensuring stable support for PCBs and reliable connections in electronic projects
- Wide Applications: Helps maintain consistent board height and prevents seams from bending, twisting, or short-circuiting; suitable for 3D printers, FPV, shutter locks, quadcopters, computers, power sockets, TV wall mounts, power strips, robots, drones, and more
- Easy Storage & Use: Includes a plastic organizer with 24 compartments, each corresponding to a labeled slot on the lid, clearly showing length and quantity for quick selection; (Tip: Choose a hex standoff shorter than your screw length for proper installation)
Full Specifications
| Size | 3 millimeters |
|---|---|
| Brand | Exqutoo |
| Color | Black/3.2mm,620Pcs,Hex |
| Material | Nylon |
| Set Name | M3 Hex Standoffs, Screws, Washers, and Nuts Kit |
| Size Name | 3 millimeters |
| Unit Count | 620.0 Count |
| Part Number | ZH-0055-1 |
| Thread Size | 3mm |
| Washer Type | Flat |
| Finish Types | Matte |
| Fastener Size | M3 |
| Fastener Type | Hex Standoffs, Washers, Screws, Nuts |
| Item Diameter | 3 Millimeters |
| Material Type | Nylon |
| Exterior Finish | Unfinished |
| Number Of Items | 620 |
| Number of Pieces | 620 |
| Screw Head Style | Hexagon |
| Washer Application | electronics |
| Full listing title | Exqutoo 620Pcs M3 Male Female Hex Standoffs Screws Assortment Kit, External & Internal Threaded Standoffs Spacers, Nylon Screws, Washers, Hex Nuts Included, for PCB Motherboard, Circuit Board |
Benchmark data for other processors
Ready to buy?
Exqutoo 620Pcs M3 Male Female Hex Standoffs Screws Assortment Kit, External & Internal Threaded Standoffs Spacers, Nylon Screws, Washers, Hex Nuts Included, for PCB Motherboard, Circuit Board is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Motherboards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- Best SATA SSDs for Gaming and Retro PC Builds in 2026
- Ollama vs llama.cpp on a 12GB GPU: Which Is Faster for Single-User Chat?
- Best Controller for PC Emulation in 2026: Pro 2 vs DualSense
- Sound Blaster AWE32 vs AWE64: The 1998 MIDI Decision
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
- Imaging Vintage IDE and SATA Drives in 2026: The Vantec CB-ISATAU2 Workflow
- Open Weights Are Reshaping Agentic Coding: A 2026 Local-Rig Reality Check
- Do you need a shifter for sim racing? Logitech G29 + Thrustmaster TH8A
- Best SSD for Local LLM Model Storage in 2026: NVMe vs SATA
- Best GPU for Qwen 3 14B (2026)
- Building a Period-Correct 2003 WinXP Gaming Rig with Sound Blaster Audigy and a Modern 8BitDo Controller
- Best Mac for running local LLMs in 2026
- Best Raspberry Pi Starter Kits for Beginners (2026)
- Best Budget Gaming PC Parts in 2026: A Ryzen + RTX 3060 Build
- Best Logitech Gaming Gear in 2026: Mice, Keyboards, and Wheels
- Imaging a vintage IDE hard drive with a USB adapter in 2026
- 4K 60Hz or 1440p 240Hz? Picking a Monitor for an RTX 3060-Class GPU
- NEEWER 18" vs UBeesize 22" Ring Light for Webcam Streaming (2026)
- Best Parts for a ComfyUI + Local LLM Workstation in 2026
- Build a Retro Emulation Handheld on Raspberry Pi Zero W with RetroPie
- A New Benchmark Says AI Fails at Real Knowledge Work — Does a Bigger Local Rig Help?
- Best Budget SSD for a Gaming PC in 2026: Crucial BX500 vs SanDisk vs Samsung 970 EVO Plus
- PiKVM Hardware Guide 2026: Boards, Kits & Storage
- Best CompactFlash and SATA/IDE Adapter for a Retro PC Boot Drive in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090