EASYLONGER ES960 CPAP Battery Backup 297.6Wh LiFePO4
Bottom line: The EASYLONGER ES960 CPAP Battery Backup 297.6Wh LiFePO4: 297.6Wh LiFePO4 pack covers 2+ nights of CPAP use without humidifier or heated tube; main trade-off: 297.6Wh exceeds the 160Wh TSA limit, so it is not approved for air travel.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 297.6Wh LiFePO4 pack covers 2+ nights of CPAP use without humidifier or heated tube
- ✓ Ships with 4 cables for ResMed S9, AirSense 10/11, AirCurve 10/11, AirMini, DreamStation 1/2
- ✓ FSA/HSA eligible, so pretax health spending accounts can cover the purchase
- ✓ Three recharge paths: 60W USB-C PD (6-8 hrs), 72W AC adapter (5-6 hrs), or 100W+ solar
- ✓ 6 output ports run laptops, phones, Steam Deck, or a car fridge drawing under 180W
Cons
- ✗ 297.6Wh exceeds the 160Wh TSA limit, so it is not approved for air travel
- ✗ Humidifier and heated tube are unsupported; the 2+ night figure assumes both are off
- ✗ Output tops out at 180W, ruling out higher-draw appliances and tools
- ✗ Sefam, iBreeze, Prisma and similar units need an added DC or cigarette-lighter cable
SpecPicks Verdict
SpecPicks scored EASYLONGER ES960 CPAP Battery Backup 297.6Wh LiFePO4 using a rating × review-volume × price-fit model applied to published specs and reviews across the power protection category. EASYLONGER's power protection lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power protection of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
- FSA/HSA Eligible CPAP Battery with 4 Cables – Compatible with ResMed S9, AirSense 10/11, AirCurve 10/11, AirMini, Philips DreamStation 1/2, and Luna G3(Heated tube not supported).
- Multi-Night CPAP Power – 297.6Wh high-capacity battery supports 2+ nights of CPAP use (without humidifier/heated tube; runtime varies by settings). Note: Exceeds 160Wh TSA limit, not TSA-approved for air travel.
- Wide CPAP Compatibility – Works with most CPAP systems including Sefam S.Box, Resvent iBreeze, Apex iCH, Löwenstein Prisma series, F&P SleepStyle, Breas Z1/Z2, and Transcend series (a DC adapter or cigarette lighter cable is required).
- Versatile Power Station – 6 output ports for added convenience. Powers laptops, tablets, phones, drones, handheld gaming consoles, Steam Deck, car refrigerators, air pumps, and other devices under 180W.
- Safe & Durable LiFePO4 Battery – Provides stable, reliable power output for long-duration CPAP use in different environments. 3000+ cycle lifespan ensures long-term durability and dependable performance.
- Fast Recharge Options – 1) 60W USB-C PD charger (6–8 hrs), 2) 72W AC adapter (5–6 hrs), 3) ≥100W solar panel (not included).
Full Specifications
| Brand | EASYLONGER |
|---|---|
| Color | Brown |
| Current | DC |
| Voltage | 12 Volts (DC), 24 Volts (DC) |
| Amperage | 15 Amps |
| Portable | Yes |
| Model Name | GP50 |
| Unit Count | 1.0 Count |
| Reusability | Rechargeable |
| Connectivity | USB-C |
| Model Number | GP50 |
| Power Source | Corded Electric |
| Warranty Type | Limited |
| Battery Weight | 6.6 Pounds |
| Connector Type | USB Type A, USB Type C |
| Output Current | 3.5 Amps |
| Output Wattage | 84 Watts |
| Item Dimensions | 8.86 x 3 x 6.2 inches |
| Number of Items | 1 |
| Number of Ports | 7 |
| Full listing title | EASYLONGER ES960 CPAP Battery Backup 297.6Wh LiFePO4, Multi-Night CPAP Power Supply for AirSense 11/10, AirCurve 10/11, AirMini, DreamStation/2 – Travel, Camping, Outdoor, Blackout & Emergency Use |
Ready to buy?
EASYLONGER ES960 CPAP Battery Backup 297.6Wh LiFePO4, Multi-Night CPAP Power Supply for AirSense 11/10, AirCurve 10/11, AirMini, DreamStation/2 – Travel, Camping, Outdoor, Blackout & Emergency Use is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Protection
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- USB Wi-Fi 6 vs PCIe Wi-Fi 6E: Which Actually Fixes Gaming Lag?
- RX 7900 XTX 24GB vs RTX 4080 16GB for Local LLM Inference (2026)
- CompactFlash as Your IDE Hard Drive: A Silent, Reliable Retro PC Boot Disk
- Best GPU for LLM Training and Inference in 2026
- Half an MI350X in a PCIe Slot: Inside AMD’s 144GB MI350P, the First Air-Cooled CDNA 4 Card
- Are We the Last Generation of PC Builders?
- Best Parts for a Local LoRA Fine-Tuning Workstation in 2026
- GitHub Copilot vs Claude Code vs OpenCode Benchmark 2026
- Step 3.7 Flash Benchmarks: What You Can Actually Run on 12GB
- Surprise AI Bills: Moving LLM Work to a Local RTX 3060 12GB Rig
- Using Claude to Auto-Generate Period-Correct DOSBox-X Configs for 90s PC Games
- Best Raspberry Pi 4 Starter Kit Bundle for First-Time Robotics Builders in 2026
- OpenAI and Anthropic Are Giving Startups Free Compute — Here's the Local Rig That Replaces It
- Best PC Cooling Solutions for AM4 and AM5 Builds in 2026
- Grok Imagine Hits #5: Can a $300 RTX 3060 Run Local Image AI?
- Best CPU for Local LLM Inference in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- RTX 5090 vs RTX 4090 — is the Blackwell upgrade worth it?
- Best CPU Cooler for AM4 Ryzen 7 5800X Overclocking Under $100 in 2026
- CompactFlash and IDE-to-USB Adapters for Retro PC Builds in 2026
- Best GPU for 1440p Esports at 240Hz in 2026
- Best $1000 Gaming PC Build for 2026: Parts We'd Actually Buy
- Microsoft + NVIDIA's 'Agent PC': What Local Hardware Does an On-Device AI Agent Actually Need in 2026?
- Best Budget SSD for Gaming and Boot Drives in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090