RFHawk 100W PL259 Dummy Load
Bottom line: Per its Amazon listing, the RFHawk 100W PL259 Dummy Load: each order includes 1pcs rf 100w pl259 uhf male plug rf dummy load.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Packing including: 1pcs 100 Watt 50Ohm uhf dummy load
- ✓ Backed by RFHawk's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for RFHawk 100W PL259 Dummy Load, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Packing including: 1pcs 100 Watt 50Ohm uhf dummy load
- This 50 ohm dummy load pl259 type provides accurate 100W RF termination with DC-1GHz frequency range, ideal for antenna testing, ham radio setups, and RF system calibration. Its ≤1.20 VSWR ensures minimal signal reflection for reliable measurements.
- Designed with a standard pl259 male connector, this 100 watt pl259 uhf male dummy load seamlessly integrates with UHF type RF equipment, including signal generators, SWR meters, and transceiver systems. Perfect for ham radio accessories and lab environments.
- Engineered for precise 50 Ohm impedance matching, this 100 watt 50 ohm dummy load pl259 minimizes signal loss and distortion, making it essential for RF load testing, transmitter tuning, and coaxial system verification.
- Each order includes 1pcs rf 100w pl259 uhf male plug rf dummy load, 50 ohm,Compact and portable, it is a must-have for technicians, engineers, and amateur radio enthusiasts.
Full Specifications
| Brand | RFHawk |
|---|---|
| Color | Black |
| Antenna | Radio |
| Impedance | 50 Ohms |
| Unit Count | 1.0 Count |
| Model Number | 100W-PL259-1G |
| Built-In Media | 1pcs 100W pl259 dummy load |
| Mfr Part Number | 100W-PL259-1G |
| Number of Items | 1 |
| Number of Packs | 1 |
| Packing including | 1pcs 100 Watt 50Ohm uhf dummy load |
| AntennaDescription | Radio |
| Warranty Description | 1 years warranty |
| Item Dimensions L x W x H | 4.72"L x 2.36"W x 2.36"H |
| Full listing title | 100W PL259 Dummy Load, DC-1GHz 50 Ohm UHF Dummy Load for Ham Radio, Low VSWR with pl259 Connector Termination Loads for Antenna Testing, Radio Transmitter |
Ready to buy?
100W PL259 Dummy Load, DC-1GHz 50 Ohm UHF Dummy Load for Ham Radio, Low VSWR with pl259 Connector Termination Loads for Antenna Testing, Radio Transmitter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Google's Tiny Gemma 3 Board: What a $0 SBC Gemma Demo Means for Local AI
- Dual RTX 3060 12GB: 24GB of VRAM for GLM-5.2 on a Budget?
- 3D Printed Glow-Spike Bracelet: Adafruit Builder's Guide 2026
- FREENOVE Ultimate Starter Kit on Raspberry Pi 4 8GB: 30 Projects Tested for First-Time Makers and Robotics…
- Best Budget AM4 Build for Local LLM Inference in 2026
- Halloween Talking Prop: Qwen3 4B on Jetson Orin Nano Super vs Raspberry Pi 5 16GB
- Building a Silent Win98/XP Boot Drive: CompactFlash + IDE Adapter Setup
- DIY NVIDIA 3D Vision Emitter: Building One with an RP2040
- North Mini Code: The New Small Coding Model and the Hardware That Runs It
- China Mobile JT-4.1 Flash 236B: A Token-Efficient MoE and What It Takes to Self-Host
- Build a Home Assistant Smart-Home Hub on a Raspberry Pi 4 8GB in 2026
- Cursor Launches Its Own AI Model and Git Platform: What Changes
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- Adding a Manual Shifter to Your Sim Rig: Is the Thrustmaster TH8A Worth It for the G29?
- Retro Game Emulator Download 2026: Best Picks for AMD PCs
- What Happened to the LLM Training Data Shortage?
- DeepCool AK620 vs Noctua NH-U12S for Ryzen 7 5800X: Which Air Cooler Wins in 2026?
- RTX 3060 12GB vs RX 6700 XT 12GB for Phi-4 14B (2026)
- CompactFlash as a Win98 Boot Drive: The 2026 Setup Guide
- Adding a Sound BlasterX G6 to a Windows 98/XP Retro Gaming PC
- AI-Assisted Driver Hunting on Voodoo3 + GeForce 4 Ti: A 2026 Win98 Workflow
- Best Budget SATA SSD for a Retro PC Build in 2026
- Why FurMark Has a 'GPU Killer' Reputation
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090