100W SMA Dummy Load,DC-3GHz 100 Watt 50 ohm Dummy Load for Ham Radio,Low VSWR RF SMA Connector (100W-SMA-3G)
Bottom line: Per its Amazon listing, the RFHawk 100W SMA Dummy Load: packing including: 1pcs 100W 50 ohm dummy load with SMA male connector.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Packing including: 1pcs 100W 50 ohm dummy load with SMA male connector
- ✓ Backed by RFHawk's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for RFHawk 100W SMA Dummy Load, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Packing including: 1pcs 100W 50 ohm dummy load with SMA male connector
- This 50 ohm dummy load SMA type provides accurate 100W RF dummy load for ham radio with DC-3GHz frequency range, ideal for antenna testing, ham radio setups, and RF system calibration. Its ≤1.20 VSWR ensures minimal signal reflection for reliable measurements.
- Designed with a standard n male connector, this 3ghz dummy load 100W seamlessly integrates with SMA type RF equipment, including signal generators, SWR meters, and transceiver systems. Perfect for ham radio accessories and lab environments.
- Engineered for precise 50 Ohm impedance matching, this 100W SMA male ham radio dummy load minimizes signal loss and distortion, making it essential for RF load testing, transmitter tuning, and coaxial system verification.
- Each order includes 1pcs rf dummyload 50 ohm SMA,Compact and portable, it is a must-have for technicians, engineers, and amateur radio enthusiasts.
Full Specifications
| Brand | RFHawk |
|---|---|
| Color | Black |
| Weight | 3g |
| Impedance | 50 ohm |
| Model Number | 100W-SMA-3G |
| Built-In Media | 100W 50 ohm dummy load with SMA male connector |
| Frequency Range | 3G |
| Mfr Part Number | 100W-SMA-3G |
| Special Feature | SWR Calibration |
| Packing including | 1pcs 100W 50 ohm dummy load with SMA male connector |
| Temperature Range | -55°C~+125°C °C |
| Compatible Devices | Signal generators, SWR meters, transceiver systems, SMA type RF equipment |
| Additional Features | SWR Calibration |
| Included Components | 100W 50 ohm dummy load with SMA male connector |
| Warranty Description | 2 years warranty |
| Water Resistance Level | Not Water Resistant |
| Item Dimensions D x W x H | 3.94"D x 2.36"W x 2.36"H |
Ready to buy?
100W SMA Dummy Load,DC-3GHz 100 Watt 50 ohm Dummy Load for Ham Radio,Low VSWR RF SMA Connector (100W-SMA-3G) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Build a 2001 GeForce 3 Windows 98 Gaming PC in 2026: Parts and Setup
- Grok 4.5 Ranks #4 on GDPval: Cloud-vs-Local Math for 2026
- Ryzen AI Max vs RTX 4060: Which Fits Your Build?
- If Your Steam Deck Broke, Would You Buy Another?
- Ryzen AI Max+ 395 Motherboard Guide: What You Can Upgrade
- DeepSeek 4 Flash on 128GB MacBook: Local Inference Throughput Reality Check
- Best Gaming Webcam and Streaming Setup in 2026
- Prompt Injection Still Breaks Local AI Agents in 2026
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Best 32-Inch 4K Gaming Monitor for PS5 + PC 2026
- GLM-5.2 Is Now the Most Intelligent Open-Weights Model — and the Most Verbose
- Intel Arc Pro B60 AI Performance: 24GB VRAM Explained
- Best Racing Wheel Under $300: Logitech G29 vs HORI Force Feedback
- AMD Ryzen AI Max 400 'Gorgon Halo': 192GB Unified Memory APU Hits $3,999
- Ryzen 7 5800X3D vs Core i7-14700K on DDR4 for 1440p Gaming (2026)
- Qwen-Image vs ERNIE vs FLUX.2 Dev: RTX 5090 Style Test
- Installing 3dfx Voodoo Glide Drivers on Windows 98 in 2026
- RTX 4000 SFF Ada vs RTX PRO 4000 SFF Blackwell for Local LLMs: 20GB vs 24GB at 70W
- How to run Qwen 3 14B on Arc B580
- Crucial BX500 vs Samsung 870 EVO for an Emulation Box
- Best Sim Racing Wheel for Forza Horizon 6 on PC in 2026
- News: Mistral Enters Robotics With Robostral Navigate 8B
- Build a Pi Zero 2 W Retro Mini-TV: Full Parts List and Setup
- ComfyUI on an RTX 3060 12GB: Local Stable Diffusion Setup and Real Throughput
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090