caqeg 12V 40A Electric Radiator Fan Relay Kit
Bottom line: Per its Amazon listing, the caqeg 12V 40A Electric Radiator Fan Relay Kit: PRECISE TEMPERATURE CONTROL: Equipped with a 185°F on / 175°F off thermostat switch; the cooling fan relay activates the fan at 185°F and turns it off at 175°F.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ PRECISE TEMPERATURE CONTROL: Equipped with a 185°F on / 175°F off thermostat switch
- ✓ The cooling fan relay activates the fan at 185°F and turns it off at 175°F
- ✓ Backed by caqeg's warranty and support channels
Cons
- ✗ Confirm socket / form-factor / power-rating compatibility against your build before ordering
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
Description:100% Brand New, Never been used.Material: Plastic and MetalVoltage: 12V DC175~185 degree electric fan thermostat relay switch kit, It is a 3/8" pipe threadThe kits includes everything you'll need to hook up to your fanComes on at 185º AND Turns off at 175ºThe kits is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt systemFits for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines Please…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for caqeg 12V 40A Electric Radiator Fan Relay Kit, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro cpu coolers & fans category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 12V 40A ELECTRIC FAN THERMOSTAT RELAY KIT: This 12V DC thermostat relay kit activates the cooling fan at 185°F and shuts off at 175°F, featuring a 3/8" NPT thread temperature sensor with a 1/2" adapter included. It supports 10, 12, 14, and 16-inch electric fans and works with most 12V automotive systems
- PRECISE TEMPERATURE CONTROL: Equipped with a 185°F on / 175°F off thermostat switch, this kit keeps your engine at an optimal temperature. The cooling fan relay activates the fan at 185°F and turns it off at 175°F, preventing overheating and unnecessary fan operation. The radiator fan switch ensures precise cooling, enhancing engine lifespan and improving overall performance
- EASY INSTALLATION: Install effortlessly with the included electric fan wiring kit and wiring diagram, This kit includes a waterproof relay, 3/8" (or1/2")NPT thermostatic switch (185* on / 175* off), and fuse block. For single fan setups.
- VERSATILE FOR SINGLE & DUAL FAN SETUPS: Suitable for low and medium-profile electric fans. For dual fans, simply use two relay kits. High-profile fans may require upgraded wiring or a heavy-duty relay for stable and safe performance.
- WIDE ENGINE COMPATIBILITY: This electric radiator fan kit is designed for single fan setups and fits a wide range of vehicles, including cars, trucks, boats, and more. Perfect for use with cooling fan wiring harness kits or electric fan wiring kits, it provides precise cooling control. The fan control kit ensures optimal performance and compatibility, making it ideal for various vehicles requiring a single cooling fan
- NOTE: If you plan to install a high-profile cooling fan, you can curl or solder a larger wire into it. The 14AWG line (15 amps) is not big enough for high ampere traction.
Full Specifications
| Brand | caqeg |
|---|---|
| Wattage | 480 watts |
| Unit Count | 1.0 Count |
| Part Number | 03175 |
| Coil Voltage | 12 Volts (DC) |
| Contact Type | Normally Open |
| Compatibility | Switch |
| Mounting Type | Chassis Mount |
| Connector Type | Ring Terminal, Pigtail Connector |
| Operation Mode | Automatic |
| Contact Material | Copper |
| Specification Met | OEM |
| Included Components | 12V 40A Electric Radiator Fan Relay Kit |
| Minimum Switching Voltage | 12 Volts (DC) |
| Full listing title | 12V 40A Electric Radiator Fan Relay Kit, 185 On 175 Off Thermostat Control Switch, Electric Engine Fan Wiring Harness Sensor Kit for Radiator Cooling Fans Universal Car Engines |
Benchmark data for other processors
Ready to buy?
12V 40A Electric Radiator Fan Relay Kit, 185 On 175 Off Thermostat Control Switch, Electric Engine Fan Wiring Harness Sensor Kit for Radiator Cooling Fans Universal Car Engines is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- RTX 3060 12GB vs Arc B580 12GB for Local LLMs in 2026
- Qwen 3.6 27B with MTP: 2.5x Throughput on Local Hardware (Real Benchmarks)
- Best Mac for running local LLMs in 2026
- Meta Is 'Token Managing' Now: Cut Local-LLM Cost on a Single RTX 3060
- Best Handheld Gaming PC Under $200 in 2026
- AMD Ryzen AI Mini PC vs a DIY RTX 3060 Build for Local LLMs
- Best Streaming Setup Under $400: G502 + QuadCast 2 S + Cam Link 4K vs the Bundle Alternatives
- Raspberry Pi Projects on GitHub: 2025 Guide
- Raspberry Pi 4 as an SMB1 File Server for Windows 98 Retro Rigs
- Does Dual-Channel RAM Matter for Local LLM Inference?
- Best AM4 CPU for Gaming in 2026: 5 Ranked Picks
- Jellyfin on a Raspberry Pi 4 8GB in 2026: The 4K Transcode Reality Check
- Build a Raspberry Pi 4 AirPlay Receiver in 2026: Full Walkthrough
- DeepSeek on the US Entity List: What It Means for Local Inference
- Is Your First Homelab Right? A 2026 Hardware Sanity Check on a Ryzen 5 5600G
- Microsoft + Nvidia Agent PCs vs a DIY RTX 3060 12GB Local-Agent Box
- Best PC Gaming Controllers in 2026: 5 Top Picks
- Ryzen 7 5800X3D vs Core i7-14700K: The DDR4 Gaming Faceoff for 2026 Builders
- MiniCPM5-1B: The 1B Model That Beats Reasoning Peers by Knowing When to Shut Up
- 50+ Raspberry Pi Project Ideas for 2025 (By Skill Level)
- vLLM on Windows in 2026: What Actually Works on a 12GB Card
- Fix Windows 98 SE on 1GB+ RAM: The Vcache Gotcha
- Prompt Injection Still Breaks Local AI Agents in 2026
- Devin Maker Cognition Hits $26B: What a Capital-Backed Coding Agent Race Means for Local-LLM Builders
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090