Skip to main content
StarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable - IDE / EIDE cable - UDMA 66/100 - 40 pin IDC (F) to 40 pin IDC (F) - 1.6 ft - IDE66, Gray
StarTech.com

StarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable

Bottom line: The StarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable: Runs two ATA drives as Master and Slave from one IDE port; main trade-off: 18in may not reach drive bays in full towers.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Runs two ATA drives as Master and Slave from one IDE port
  • ✓ Rated for UDMA 66/100 and lists ATA 66/100/133 drive support
  • ✓ 18in length keeps mid-tower and compact case wiring tidy
  • ✓ Fits HDDs, CD/DVD-ROM, Zip and tape drives with 40-pin headers
  • ✓ Listed as compatible with the StarTech.com USB2SATAIDEU adapter

Cons

  • ✗ 18in may not reach drive bays in full towers
  • ✗ Flat ribbon design blocks more airflow than rounded cables
  • ✗ No SATA support, so only legacy IDE/EIDE devices work
  • ✗ 2.5in laptop IDE drives need a separate 44-pin adapter

Manufacturer description

Need to put two IDE drives on one channel in an older PC? The StarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable connects two ATA 66/100/133 drives to a single IDE port on your motherboard, one set as Master and one as Slave. It is a flat ribbon cable with 40-pin IDC female connectors and is rated for UDMA 66/100, so it works for retro builds and for rescuing data off old drives. At 18 inches (1.6 ft), the cable fits mid-tower and compact cases, where a long ribbon would only add clutter. Use it for hard disk drives, CD-ROM and DVD-ROM drives, Zip drives, tape backup units or any…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for StarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the cables & connectors category before committing. On the listing's own facts, the case for it is "Runs two ATA drives as Master and Slave from one IDE port"; the main trade-off is "18in may not reach drive bays in full towers". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How many drives can I connect with this StarTech.com IDE cable?

Two. It is a dual drive cable that connects two ATA devices to one IDE port, one set as Master and the other as Slave.

How long is the cable?

The cable is 18 inches (1.6 ft) long, which suits most mid-tower and compact cases. In a large full tower, measure the distance from the motherboard IDE header to your drive bays first.

Will it work with a CD-ROM or DVD drive as well as a hard drive?

Yes. StarTech.com lists hard disk drives, CD-ROM, DVD-ROM, Zip drives, tape backup drives and other ATA peripherals with a 40-pin IDE connector as supported devices.

What transfer modes does this cable support?

It is rated for UDMA 66/100, and the listing says it connects ATA 66/100/133 drives. Real-world speed also depends on your drive and your IDE controller.

Can I use this cable with a USB adapter to read old IDE drives?

Yes. The listing names the StarTech.com USB2SATAIDEU adapter as a compatible part, so you can connect legacy IDE drives to a modern computer over USB to recover data.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • IDE / EIDE cable
  • UDMA 66/100
  • 40 pin IDC (F) to 40 pin IDC (F)
  • 1.6 ft
  • for P/N: USB2SATAIDEU

Full Specifications

BrandStarTech.com
ColorGray
ModelIDE66
for P/NUSB2SATAIDEU
Frequency100 MHz
Cable TypeUSB
Item ShapeRound
Model Name18in Dual Drive Ultra
Unit Count1 Count
Item Length1.6 Feet
Part NumberIDE66
Connector TypeIde (Eide/Pata)
Number of Pins40
Maximum Voltage5 Volts (DC)
Number of Items1
Special FeatureHigh Speed, Versatile Compatibility
Connector GenderFemale-to-Female
Compatible DevicesComputer, DVD Player
Data Transfer Rate0.1 Gigabits Per Second
Indoor Outdoor UsageIndoor, Outdoor
Full listing titleStarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable - IDE / EIDE cable - UDMA 66/100 - 40 pin IDC (F) to 40 pin IDC (F) - 1.6 ft - IDE66, Gray

Ready to buy?

StarTech.com 18in Dual Drive Ultra ATA IDE Hard Drive Cable - IDE / EIDE cable - UDMA 66/100 - 40 pin IDC (F) to 40 pin IDC (F) - 1.6 ft - IDE66, Gray is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Cables & Connectors

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →