StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan w/ TX3 Connector
Bottom line: The StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan: Dual ball bearing design built for long, continuous-duty life; main trade-off: airflow, RPM and noise ratings not listed in product details.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Dual ball bearing design built for long, continuous-duty life
- ✓ Slim 60x10mm frame fits tight vintage and server fan mounts
- ✓ 3-pin TX3 connector with tach wire for BIOS speed monitoring
- ✓ Includes 3-pin to 4-pin LP4 Molex adapter for PSU power
- ✓ Drop-in replacement for failed 60mm case and enclosure fans
Cons
- ✗ Airflow, RPM and noise ratings not listed in product details
- ✗ 3-pin design lacks 4-pin PWM speed control
- ✗ Molex adapter runs the fan without a readable speed signal
- ✗ 60mm size moves far less air than 80mm or 120mm fans
Manufacturer description
Is a small 60mm fan in your retro PC, NAS enclosure or server chassis rattling, or has it stopped spinning? The StarTech.com FAN6X1TX3 is a direct replacement case fan built for exactly that job. It measures 60x10mm, a slim profile that fits the tight 60mm mounts found in older desktop towers, 1U-style enclosures, drive cages and vintage builds. The fan uses a dual ball bearing design. Ball bearings tend to outlast sleeve bearings, especially in fans that run around the clock or are mounted horizontally. The 3-pin TX3 connector includes a tachometer wire, so your motherboard or BIOS can read…
SpecPicks Verdict
SpecPicks scored StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan using a rating × review-volume × price-fit model applied to published specs and reviews across the retro cpu coolers & fans category. StarTech.com's retro cpu coolers & fans lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for retro cpu coolers & fans of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What size is the StarTech.com FAN6X1TX3 fan?
It is a 60x10mm fan, meaning a 60mm square frame with a 10mm depth. Measure your existing fan and mount to confirm both dimensions before replacing.
Can I plug this fan into my motherboard?
Yes. It uses a 3-pin TX3 connector that fits standard 3-pin motherboard fan headers, and the tachometer wire lets the board report fan speed.
What if my system has no free fan header?
The box includes a 3-pin to 4-pin LP4 Molex adapter, so you can power the fan directly from a power supply Molex connector instead.
Will it work on a 4-pin PWM fan header?
A 3-pin fan physically fits most 4-pin headers, but it will not use PWM control. Speed control depends on whether your board supports DC voltage mode on that header.
What bearing type does this fan use?
It uses a dual ball bearing design, which StarTech.com specifies for reliability and longer life. Check the product listing for current warranty terms.
Key Features
- Dual ball bearing design
- 3-pin connector with tachometer wire
- Includes a 3-pin to 4-pin LP4 Adapter
- A dual ball bearing design ensures reliability and longer life
- Comes ready for either 3-pin motherboard fan headers or LP4 Molex power supplies
- Dual ball bearing design
Full Specifications
| Brand | StarTech.com |
|---|---|
| Model | FAN6X1TX3 |
| Voltage | 12 Volts |
| Wattage | 1.92 watts |
| Material | Plastic |
| Unit Count | 1.0 Count |
| Noise Level | 28 Decibels |
| Part Number | FAN6X1TX3 |
| Material Type | Plastic |
| Cooling Method | Air |
| Item Type Name | Cooling Fan |
| Number of Items | 1 |
| Air Flow Capacity | 15.49 Cubic Feet Per Minute |
| Compatible Devices | Desktop |
| Power Connector Type | 3 pin,3-pin,4-pin |
| Warranty Description | 2 Year |
| Maximum Rotational Speed | 2200 RPM |
| Item Dimensions L x W x H | 2.4"L x 0.4"W x 2.4"H |
| Global Trade Identification Number | 00065030786355 |
| Full listing title | StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan w/ TX3 Connector - 3 pin case Fan - TX3 Fan - 60mm Fan (FAN6X1TX3), Black |
Benchmark data for other processors
Ready to buy?
StarTech.com 60x10mm Replacement Ball Bearing Computer Case Fan w/ TX3 Connector - 3 pin case Fan - TX3 Fan - 60mm Fan (FAN6X1TX3), Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro CPU Coolers & Fans
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Noctua NH-U12S vs DeepCool AK620: Best Air Cooler for AM5 OC
- Best CPU Coolers for High-TDP Gaming Builds in 2026
- Viral: Hobbyists Are Tracking Every Plane With a $50 Raspberry Pi - Here Is What You Need
- Best CPU cooler for the Ryzen 7 5800X in 2026
- Inkling 975B Open Weights: What a Frontier Speech Model Means for Local Rigs
- Crucial BX500 vs Samsung 870 EVO: Best SATA SSD for Game Loads
- How to run DeepSeek-R1 32B on Apple M3 Ultra
- GLM-5.2 vs Qwen3 on a 12GB GPU: Best Open-Weights LLM for an RTX 3060
- GeForce 4 Ti 4600 AGP in a Windows XP Build: Drivers, Gotchas and Benchmarks
- KOORUI 27" 4K vs Samsung Odyssey 4K: Best 27-Inch Panel for PC and Console
- Best Budget SATA SSD for a Retro PC Build in 2026
- Mac Studio M3 Ultra vs RTX 5090 for AI Inference in 2026
- Best Noctua Cooling Products in 2026: A Brand Buying Guide
- Claude Fable 5 Launches at #1 on the Intelligence Index — What Local Builders Should Take Away
- Qwen3.6 27B on a Single RTX 3060 12GB: Why MTP Drops Context From 137K to 14K
- Best CPU Coolers for Ryzen 9000 (9800X3D / 9950X3D) in 2026
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Sound Blaster Audigy FX vs Sound Blaster Live! for Period-Correct Win98 Builds
- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- FIDECO vs Unitek vs Vantec: Best IDE-to-USB Adapter for Dumping Retro Drives
- Ryzen 7 5800X vs Ryzen 5 5600G for a Budget Gaming Build
- Best Budget SATA SSD for Everyday Upgrades (2026)
- NotebookLM Now Runs Code: Self-Hosting the Same Idea on a 12GB GPU
- Gemma-4-Harmonia-31B Uncensored on RTX 3060 12GB: Quantization, VRAM, and tok/s
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090