Skip to main content
chenyang PCI-E Express 16X to 16x Male to Female Riser Extender Card Ribbon Cable 20cm
chenyang

chenyang PCI-E Express 16X to 16x Male to Female Riser Extender Card Ribbon Cable 20cm

Bottom line: The chenyang PCI-E Express 16X to 16x Male to Female Riser Extender Card ($7.99 on Amazon as of 2026-10-26 22:22 UTC): 20cm FFC ribbon offsets a card from the slot to clear coolers or blocked slots; main trade-off: PCIe generation rating not stated; high-bandwidth GPUs may need testing.

$7.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $7.99 Compare to similar expansion cards

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-10-26. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ 20cm FFC ribbon offsets a card from the slot to clear coolers or blocked slots
  • ✓ Flexible flat cable is designed to bend into 1U, 2U and 3U rackmount chassis
  • ✓ Female x16 slot accepts x1, x4, x8 and x16 PCIe cards
  • ✓ Full x16 male-to-female design keeps the native slot layout end to end
  • ✓ Compact riser ends fit retro PC cases and custom enclosures

Cons

  • ✗ PCIe generation rating not stated; high-bandwidth GPUs may need testing
  • ✗ Fixed 20cm length; no option for shorter or longer runs in this listing
  • ✗ No mounting bracket or screws listed, so the card must be secured separately
  • ✗ Flat ribbon is more fragile to sharp creases than a shielded twinax riser

Manufacturer description

The chenyang PCI-E Express 16X to 16x riser extender cable moves a graphics card or expansion card up to 20cm away from the motherboard slot. One end is a male x16 edge connector that plugs into the board. The other is a female x16 slot that takes your card. A flexible FFC (flat flexible cable) ribbon joins the two ends. The ribbon is designed to bend for 1U, 2U and 3U rackmount chassis. It suits low-profile servers, cramped retro PC cases and custom enclosures where a card cannot sit straight in its slot. The female end accepts PCIe x1, x4, x8 and x16 cards, so one chenyang riser can serve…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored chenyang PCI-E Express 16X to 16x Male to Female Riser Extender Card… using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. chenyang's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

How long is the chenyang PCIe x16 riser cable?

The ribbon cable is 20cm long. It runs between a male x16 connector that plugs into the motherboard and a female x16 slot that holds the card.

Will this riser work with a PCIe x1 or x4 card?

Yes. The listing says the female slot supports PCIe x1, x4, x8 and x16 cards, so smaller expansion cards fit as well as full-length x16 cards.

Can I use this riser in a 1U or 2U server chassis?

The high-speed FFC ribbon is described as flexible enough for 1U, 2U and 3U chassis. That makes it suitable for mounting a card sideways or offset inside a low-profile rackmount case.

Does this riser support PCIe 4.0 or 5.0 graphics cards?

The product listing does not state a PCIe generation rating. Check with the manufacturer before relying on it for a current high-bandwidth GPU, and test for stability once it is installed.

Which end plugs into the motherboard?

The male x16 edge connector goes into the motherboard's PCIe slot. Your card seats into the female x16 slot at the other end of the 20cm ribbon.

Key Features

  • PCI-E Express 16X to 16x Male to Female Riser Extender Card Ribbon Cable 20cm
  • Layer PCB bard designing.
  • slot PCI-E 16X riser card with normal ribbon cable.
  • high speed FFC cable is flexible for 1U,2U,3U chassis.
  • Support PCIe 1X card and 4X,8X,16X card.

Full Specifications

Brandchenyang
StylePCI-E 16X to 16X
Style NamePCI-E 16X to 16X
Model NumberEP-075-CY
Mfr Part NumberLYSB00S6GKPVO-CMPTRACCS
Compatible DevicesPersonal Computer, Laptop
Hardware InterfacePCI

Hardware benchmark data

Ready to buy?

chenyang PCI-E Express 16X to 16x Male to Female Riser Extender Card Ribbon Cable 20cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $7.99

*Price sourced from Amazon.com. Last updated 2026-10-26. Price and availability subject to change.

Related Expansion Cards

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
chenyang PCI-E Express 16X to 16x Male to Female Riser Extender Card Ribbon Cable 20cm
$7.99
View on Amazon →