chenyang
chenyang PCI-E X1 Extension Adapter PCI Express X1 Low Profile Angled Riser Card Extender Relocate Adapter
Bottom line: The chenyang PCI-E X1 Extension Adapter PCI Express X1 Low Profile Angled: 10cm flexible FPC ribbon lets you place an x1 card away from crowded slots; main trade-off: 10cm length limits how far you can move the card.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 10cm flexible FPC ribbon lets you place an x1 card away from crowded slots
- ✓ Angled connector fits female x1 ports with limited clearance
- ✓ Extra power cable to keep the relocated card powered properly
- ✓ No driver needed; the system sees the card as if it were in the original slot
- ✓ Suits low-profile rack mount chassis and custom enclosures
Cons
- ✗ 10cm length limits how far you can move the card
- ✗ Not hot-swappable; you must power down to connect or remove
- ✗ PCIe x1 only; not a solution for x16 graphics card slots
- ✗ Card faces away from the board by default and needs rerouting
Manufacturer description
The chenyang PCI-E X1 Extension Adapter moves a PCI Express x1 card away from your motherboard. It uses a 10cm flexible FPC ribbon cable, so you can mount the card where a rigid slot can't reach. That makes it a practical riser for custom enclosures, low-profile rack mount chassis and cramped retro PC builds where nearby components block the slot. The angled connector lets you plug into a female PCIe x1 port even when there is little room around it. At the far end, the riser's PCIe socket sits directly in line with the socket on the motherboard, so card orientation stays the same. The card…
SpecPicks Verdict
SpecPicks scored chenyang PCI-E X1 Extension Adapter PCI Express X1 Low Profile… using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. chenyang's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is the chenyang PCIe x1 riser cable?
The flexible FPC ribbon is 10cm long, which is enough to move a PCIe x1 card around nearby obstructions inside a case or rack chassis.
Do I need to install a driver for this riser card?
No. The riser needs no driver, so the system sees the PCIe x1 card as if it were plugged straight into the motherboard slot.
Can I plug or unplug cards while the PC is running?
No. The riser is not hot-swappable. Shut down and unplug the system before you connect or remove the riser or the card.
Will it fit in a low-profile or rack mount case?
Yes, it is designed for that. The listing says it is especially suited to custom enclosures and low-profile rack mount chassis. The angled connector helps when space around the port is tight.
Why does the riser have an extra power cable?
The extra power cable is there to make sure the relocated PCIe x1 card gets proper power. Check the product listing for the exact connector type before you install it.
Key Features
- High Quality Flex Ribbon Riser Card. No Driver necessary and not support hot swappable.
- The angled type Allowing you to connect it to a female port, even if space around the port is limited.
- This riser card faces away from the mainboard; however, since it is flexible, it can be redirected. Please ensure that PCIE cards are securely mounted in an EMI safe location, and that no shorts have occurred due to poor PCIE card placement. The unit has additional power cable to ensure proper power support.
- This is PCI-e (PCI Express) 1X Slot Relocate FPC Cable.Length:10cm,It is especially suitable for custom enclosures and low-profile rack mount chassis.
- The Flexible Slot PCI-Express 1x Riser Card makes the PCI Express 1x Card away from motherboard , with the PCI Express socket directly in line with the socket on the motherboard.
Full Specifications
| Brand | chenyang |
|---|---|
| Style | Classic |
| Style Name | Classic |
| Unit Count | 1.0 Count |
| Model Number | CY-EP-017 |
| Mfr Part Number | CY-EP-017 |
| Number of Items | 1 |
| Compatible Devices | Personal Computer |
| Hardware Interface | PCI Express x1 |
Hardware benchmark data
Ready to buy?
chenyang PCI-E X1 Extension Adapter PCI Express X1 Low Profile Angled Riser Card Extender Relocate Adapter is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Expansion Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Voodoo3 3000 vs GeForce 256: 1999 Glide vs OpenGL Showdown
- Gemma-4-Harmonia-31B Uncensored on RTX 3060 12GB: Quantization, VRAM, and tok/s
- Best Steam Deck Dock and 4K Monitor Setup for TV-Mode Gaming in 2026
- Best Gaming Mouse Pad for FPS Esports (2026)
- Sound Blaster Audigy FX in a Period-Correct WinXP Build: 2026 Install and Tuning Guide
- Hackaday Europe 2026: Building a Retro PC From Scratch
- MTP Decoding on RTX 3060 12GB: When Multi-Token Prediction Helps (and Hurts)
- Best Budget Gaming CPU in 2026: 5 AM4 and Entry Picks Ranked
- Laguna XS.2 Lands in llama.cpp: What the Tiny Hybrid Model Means for Local Inference
- Best USB Microphone for Streaming in 2026: QuadCast 2 vs Yeti
- Why You Shouldn't Leave the Default Model on Copilot or Gemini
- Voodoo5 5500 AGP Won't POST: Complete Troubleshooting Guide for 2026 Restorations
- 3dfx Voodoo2 SLI on Windows 98 SE: Period-Correct Build, Glide Driver Setup, and Real Quake 3 Benchmarks
- Jetson Orin Nano Super vs Hailo-8 AI HAT+: Which Edge-AI Path Is Right for You?
- Best CPU Cooler for High-TDP Builds (2026)
- Mistral Medium 3.5 128B on Local Hardware: MLX 4-bit at ~70GB Explained
- SteamOS Boots on Intel Hardware: Enthusiast Hack Lands
- M5 vs DGX Spark vs Strix Halo vs RTX 6000: AI Workload Guide
- Best Retro-PC Storage & Drive-Imaging Kit in 2026: 5 Picks
- Best Cooler for the Ryzen 7 5800X: Noctua NH-U12S vs ML240L
- GPT-5.6 Sol Reportedly Cracks a 30-Year Statistics Conjecture in 90 Minutes
- Turtle Beach Recon 50 vs BERIBES: Best Budget Gaming Headset Under $40?
- Running Qwen3.5/3.6 with NextN MTP on an RTX 3090 Ti
- Microsoft's Copilot Super App vs a Local RTX 3060 Ollama Box in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090