Skip to main content
Chenyang PCI-E Express 16X to 16x Riser Extender Card with Molex IDE Power & Ribbon Cable 20cm
chenyang

Chenyang PCI-E Express 16X to 16x Riser Extender Card with Molex IDE Power & Ribbon Cable 20cm

Bottom line: The Chenyang PCI-E Express 16X to 16x Riser Extender Card ($8.99 on Amazon as of 2026-10-26 22:18 UTC): Full x16-to-x16 riser that also accepts x1, x4 and x8 cards; main trade-off: supported PCIe generation and bandwidth not stated in the listing.

$8.99 on Amazon, checked (price may vary)

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Buy on Amazon — $8.99 Compare to similar expansion cards

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

*Price sourced from Amazon.com. Last updated 2026-10-26. Price and availability subject to change.

Pros & Cons

Pros

  • ✓ Full x16-to-x16 riser that also accepts x1, x4 and x8 cards
  • ✓ 20cm flexible FFC ribbon routes through 1U, 2U and 3U chassis
  • ✓ Molex 12V/GND input adds power for PCIe video cards
  • ✓ Single-slot design keeps the extension simple to install
  • ✓ Molex power input suits retro PCs and older PSUs with spare 4-pin leads

Cons

  • ✗ Supported PCIe generation and bandwidth not stated in the listing
  • ✗ Fixed 20cm cable length; no longer or shorter option in this SKU
  • ✗ Needs a free Molex lead from the power supply
  • ✗ Extends only one slot; multi-card setups need extra risers

Manufacturer description

The Chenyang PCI-E Express 16X to 16x Riser Extender Card lets you move a graphics card or expansion card away from the motherboard slot. Use it when a tight case, a vertical mount or a retro build blocks a card from sitting directly in the slot. The card connects to a single x16 slot through a 20cm flexible FFC ribbon cable. The thin cable bends around tight corners, which helps in low-profile 1U, 2U and 3U rackmount chassis where a rigid riser will not fit. The slot at the far end takes PCIe x1, x4, x8 and x16 cards, so one riser covers a video card, a network adapter, a capture card or a…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored Chenyang PCI-E Express 16X to 16x Riser Extender Card using a rating × review-volume × price-fit model applied to published specs and reviews across the expansion cards category. chenyang's expansion cards lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for expansion cards of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Frequently Asked Questions

Will this riser work with a PCIe x1 or x4 card?

Yes. The listing says the riser supports PCIe 1X, 4X, 8X and 16X cards, so smaller cards fit in its x16 slot.

How long is the extension cable?

The cable is 20cm long. It is a flexible high-speed FFC ribbon cable designed to bend through compact 1U, 2U and 3U chassis.

Why does the riser have a Molex power connector?

The Molex (12V/GND) input supplies extra power to the riser for a PCIe video card. It draws from your power supply instead of relying only on the motherboard slot.

Do I have to connect the Molex power?

The listing describes the Molex input as extra power for PCIe video cards. Connect it whenever you run a graphics card through the riser. Check the product listing or the seller for guidance on low-power cards.

Does this riser support PCIe 3.0 or 4.0 speeds?

The product context does not state a PCIe generation or rated bandwidth. Check the product listing or contact Chenyang to confirm compatibility before using it with a current-generation GPU.

Key Features

  • PCIE Express 16X to 16x Riser Extender Card with Molex IDE Power & Ribbon Cable 20cm
  • high speed FFC cable is flexible for 1U,2U,3U chassis.
  • 1slot PCIE 16X riser card with normal ribbon cable.
  • Support PCIe 1X card and 4X,8X,16X card.
  • Extra molex(12V/GND) power supply for PCIe video card.

Full Specifications

Brandchenyang
StylePCI-E 16X to 16X+POWER
Style NamePCI-E 16X to 16X+POWER
Model NumberEP-074-CY
Mfr Part NumberEP-074-CY
Compatible DevicesDesktop, Laptop
Hardware InterfacePCI

Hardware benchmark data

Ready to buy?

Chenyang PCI-E Express 16X to 16x Riser Extender Card with Molex IDE Power & Ribbon Cable 20cm is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Buy on Amazon — $8.99

*Price sourced from Amazon.com. Last updated 2026-10-26. Price and availability subject to change.

Related Expansion Cards

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
Chenyang PCI-E Express 16X to 16x Riser Extender Card with Molex IDE Power & Ribbon Cable 20cm
$8.99
View on Amazon →