Mount-It! Triple Monitor Stand for Desk
Bottom line: The Mount-It! Triple Monitor Stand for Desk ($79.99 on Amazon as of 2026-10-21 16:27 UTC): Freestanding 12.5 x 13.4 in base needs no clamp or desk drilling.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Freestanding 12.5 x 13.4 in base needs no clamp or desk drilling
- ✓ Outer arms swivel 360 degrees, tilt 45 down and 80 up
- ✓ Center mount adjusts independently from the two wing arms
- ✓ Fits VESA 75x75 and 100x100 without a separate adapter plate
- ✓ Lifetime warranty plus US-based technical support included
Cons
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
The Mount-It! Triple Monitor Stand turns a single desk into a three-screen command center without a drill or a clamp in sight. Its freestanding base measures 12.5 inches wide by 13.4 inches deep, so it sits on the desk surface and works on glass tops, cubicle returns, and rentals where mounting hardware isn't allowed. Each of the three arms holds a display up to 15.4 lbs on a VESA 75x75 or 100x100 pattern, sized for flat screens up to 27 inches in a straight line or 24 inches when you run curved panels. Alignment is handled arm by arm. The outer arms tilt 45 degrees down and 80 degrees up…
SpecPicks Verdict
SpecPicks scored Mount-It! Triple Monitor Stand for Desk using a rating × review-volume × price-fit model applied to published specs and reviews across the sim racing category. Mount-It!'s sim racing lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for sim racing of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What size monitors does this triple stand fit?
Three flat screens up to 27 inches in a straight-line layout, or up to 24 inches if your monitors are curved. Each arm holds up to 15.4 lbs.
Does it clamp to the desk or need drilling?
Neither. It is freestanding on a 12.5 in wide by 13.4 in deep base, which is why it works on glass desks and cubicle surfaces where clamping isn't an option.
Will it work with my monitors' mounting holes?
It supports VESA 75x75 and 100x100 patterns. If your display uses a larger pattern such as 200x100, you would need a VESA adapter plate, sold separately.
Can I angle the side monitors inward for sim racing or trading?
Yes. The outer arms swivel 360 degrees and tilt 45 degrees down or 80 degrees up, and the center mount adjusts independently so you can wrap the wings without moving your main screen.
Key Features
- Designed for triple-screen productivity – Build a focused workstation with three aligned displays, ideal for productivity, trading, coding, content creation, or immersive gaming setups.
- Correctly sized for everyday monitors – Supports three flat screens up to 27 inches in a straight-line configuration or 24 inches in curved setups, holding 15.4 lbs per monitor with VESA 75x75 or 100x100 patterns.
- Independent full-motion monitor arms – Outer arms tilt 45° down / 80° up, swivel 360°, and adjust vertically on the pole, while the center mount also tilts, swivels, and moves independently for precise alignment.
- Stable freestanding desk base – Solid, compact base (12.5” W x 13.4” D) provides dependable stability without clamps or drilling, making it ideal for desks where mounting isn’t an option.
- Clean, professional cable routing – Integrated cable management on each arm keeps power and display cables neatly organized and out of sight for a clutter-free setup.
- Heavy-duty steel construction – Reinforced pole and arm design delivers reliable strength and stability when used within the recommended monitor size and weight limits.
Full Specifications
| Brand | Mount-It! |
|---|---|
| Color | Black |
| Material | Other |
| Unit Count | 3 Count |
| Model Number | MI-2789 |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating |
| Built-In Media | Unit Only |
| Mfr Part Number | MI-2789 |
| Number of Packs | 1 |
| Compatible Devices | Monitor |
| Enclosure Material | Other |
| Maximum Tilt Angle | 45 Degrees |
| Maximum-Supported Screen Size | 24 Inches |
| Minimum-Supported Screen Size | 19 Inches |
| Full listing title | Mount-It! Triple Monitor Stand for Desk, 3 Monitor Mount Fits 19–27" Screens, Holds 15.4 lbs Each, Full Motion Triple Monitor Arm with Tilt Swivel Rotate, VESA 75x75, 100x100, Stable Freestanding Base |
Ready to buy?
Mount-It! Triple Monitor Stand for Desk, 3 Monitor Mount Fits 19–27" Screens, Holds 15.4 lbs Each, Full Motion Triple Monitor Arm with Tilt Swivel Rotate, VESA 75x75, 100x100, Stable Freestanding Base is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-21. Price and availability subject to change.
Related Sim Racing
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
More reviews from the SpecPicks archive
Browse all reviews →- ComfyUI Ideogram 4: Setup, GPU Needs & Hardware Guide
- Ryzen 9800X3D vs 7800X3D: Best CPU for an RTX 5070 Build
- Steam Controller (2026) Scores 83/100 in Early Reviews
- VRAM calculator: what can you actually run on your GPU?
- RTX 3060 Driver Crashes and Stuttering: Troubleshooting Guide (2026)
- How Creative's Sound Blaster Ruled PC Audio for 20 Years
- Building a Retro PC Server Farm with AI: Hosting Quake 3, UT99 & OpenArena in 2026
- CompactFlash as an IDE Hard Drive: Silent, Solid-State Storage for Win98 & DOS Builds
- Quietest AM4 CPU Cooler in 2026: Noctua NH-U12S vs DeepCool AK620 vs AC Infinity
- ASUS Beta BIOS Restores Ryzen 9000 Memory Encryption Ahead of AMD
- Baidu Unlimited OCR Runs Locally: Document AI on an RTX 3060 12GB
- How to run Llama 3.1 70B on Apple M3 Ultra
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
- Inside the Intel 8087: Decapping a 1980 Math Coprocessor's Microcode
- Best GPU for Local Stable Diffusion Under $400: Why the RTX 3060 12GB Still Wins
- CompactFlash as a Hard Drive: The Win98 Retro Storage Guide
- Microsoft's SkillOpt Boosts GPT-5.5 With Just a Trained Markdown File
- Can the Ryzen 5 5600G Run Local LLMs Without a GPU?
- Asus ROG Harpe II Extreme: A 24K-Gold, 65K-Sensor Gaming Mouse
- $1,500 Gaming PC Build 2026: Parts, Cost, 1440p FPS
- RX 9070 XT vs RTX 5080 for a 9800X3D Build (2026)
- Ryzen 7 9800X3D vs 7800X3D: The Real-Game FPS Gap at 1080p, 1440p, and 4K
- Imaging Vintage IDE Drives in 2026: The Retro-PC Backup Workflow
- Can a Raspberry Pi 4 Run a Local LLM? Ollama tok/s Tested
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090