CableCreation Cat6 RJ45 Connectors
Bottom line: The CableCreation Cat6 RJ45 Connectors: 100 connectors per bag - enough for a full house or lab rewire; main trade-off: not a pass-through design - pairs must be trimmed flush first.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 100 connectors per bag - enough for a full house or lab rewire
- ✓ Gold-plated contacts resist corrosion and protect signal integrity
- ✓ Fits solid and stranded UTP, 24-26 AWG, round or flat jacket
- ✓ Clear housing lets you verify wire order before crimping
- ✓ Backward compatible with Cat5e for re-terminating older runs
Cons
- ✗ Not a pass-through design - pairs must be trimmed flush first
- ✗ Steeper learning curve than feed-through ends for beginners
- ✗ No strain-relief boots included in the pack
- ✗ Requires a separate RJ45 crimping tool, not included
Manufacturer description
The CableCreation Cat6 RJ45 Connectors pack gives you 100 crimp-on ends for building your own Ethernet runs instead of paying per-cable for factory patch leads. Each CableCreation connector is built for solid or stranded UTP in the 24 to 26 AWG range, and works with both round and flat cable jackets, so one bag covers most in-wall runs and bench patching. Three-pin contact tabs bite through the conductor insulation for a precise, repeatable termination, and the gold-plated contacts protect signal integrity and resist corrosion over long service life. These are Gigabit Ethernet compliant and…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CableCreation Cat6 RJ45 Connectors, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the retro networking cards category before committing. On the listing's own facts, the case for it is "100 connectors per bag - enough for a full house or lab rewire"; the main trade-off is "Not a pass-through design - pairs must be trimmed flush first". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Are these pass-through RJ45 connectors?
No. Wires cannot pass through the front of these connectors. You trim the pairs flush, arrange them, and push them to the deepest seat before crimping. CableCreation lists ASINs B08HLH4RH3 and B08HLJJT9D for their pass-through versions.
Will these work with Cat5e cable?
Yes. They are Gigabit Ethernet compliant and backward compatible with Cat5e, so you can use the same connector stock for both Cat5e and Cat6 runs.
Do these work with solid core or stranded cable?
Both. They are designed for solid and stranded unshielded twisted pair, supporting round or flat cable from 24 to 26 AWG.
Do I need a special crimping tool?
You need standard RJ45 crimping pliers, which are not included in this pack. Because these are not pass-through ends, a standard non-trimming crimper works fine.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 100 Cat6 RJ45 Connector: These Cat 6 connectors fit to standard RJ45 port devices and are designed for solid or stranded unshielded twisted pair (UTP) cables,these Cat6 ends support round or flat stranded cables from 24 to 26 AWG gauge.
- Efficient and Secure Cat6 Cable Connections: Ethernet connectors feature three-pin contact tabs for precise penetration of the core, ensuring reliable, high-performance connections for Gigabit Ethernet networks.
- Gigabit Performance Category Cat6 RJ45 End: Compliant with Gigabit Ethernet standards, these Cat6 RJ45 ends are backward compatible with CAT5E cables. The gold-plated contacts enhance signal integrity and corrosion resistance for long-term reliability. The transparent housing enables intuitive visual checks of indicator status, facilitating real-time network monitoring.
- Operation: The wire can not be directly through the RJ45 connectors, you need to cut the first flush, in order to arrange, and then push the cable into the Cat6 connector until the deepest position, use crimping pliers for crimping. Note: This interface is not RJ45 straight-through type. For straight-through interface, please check our other products (ASIN: B08HLH4RH3/B08HLJJT9D).
- Portable and Reliable: 100 RJ45 Connectors is small and portable for large projects or multiple installation scenarios. Designed for computers, hubs, routers, switches.
- Note: This product does not come with holes for cables to pass through. For products with holes, please purchase ASIN: B08HLH4RH3 and B08HLJJT9D.
Full Specifications
| Note | This product does not come with holes for cables to pass through. For products with holes, please purchase ASIN: B08HLH4RH3 and B08HLJJT9D. |
|---|---|
| Brand | CableCreation |
| Color | Transparent |
| Gauge | 26.0 |
| Model | CL0190 |
| Cable Type | Ethernet |
| Item Shape | Flat |
| Unit Count | 100 Count |
| Part Number | CL0190 |
| Connector Type | RJ45 |
| Number of Pins | 8 |
| Maximum Current | 568 Amps |
| Maximum Voltage | 12 Volts |
| Number of Items | 100 |
| Special Feature | High Speed |
| Connector Gender | Female-to-Female |
| Specification Met | RoHS |
| Compatible Devices | Docking Station, Gaming Console, Laptop, Modem, Personal Computer |
| Data Transfer Rate | 1 Gigabits Per Second |
| Indoor Outdoor Usage | Indoor |
| Full listing title | CableCreation Cat6 RJ45 Connectors, 100-PACK Cat6 RJ45 Ends, Ethernet Cable Crimp Connectors UTP Network Plug for Solid Wire and Standard Cable, Transparent |
Ready to buy?
CableCreation Cat6 RJ45 Connectors, 100-PACK Cat6 RJ45 Ends, Ethernet Cable Crimp Connectors UTP Network Plug for Solid Wire and Standard Cable, Transparent is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Retro Networking Cards
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Intel Arc Pro B70 vs RTX 3060 12GB for Local LLMs
- Second Streaming PC vs NVENC: What an Old i7-9700K Is Still Good For
- Raspberry Pi 4 8GB vs Zero 2W for an AI Camera (2026)
- Best Cooling for AMD Ryzen Overclocking in 2026
- Noctua NH-U12S vs MasterLiquid ML240L for a Ryzen 7 5800X
- Core i7-9700K vs Ryzen 7 5800X for 1440p Gaming in 2026
- Best Retro Gaming Consoles and Controllers to Buy in 2026
- GLM-5.2 Local: What GPU Actually Runs the Top Open-Weights LLM
- Vision LLMs Driving Period-Correct WinXP and Win98 Installers: Field Report from a 4-PC Retro Fleet
- Kimi K3 Just Launched: What You Can (and Can't) Run Locally Instead
- Best NVMe SSD for a Compact Gaming PC: WD_BLACK SN770 in 2026
- Best SSD for a PS4 Pro Upgrade in 2026: 870 EVO vs BX500
- Best First Upgrades for a Prebuilt Gaming PC in 2026
- Ryzen 5 5600G vs Ryzen 7 5800X for a 24/7 Ollama Box
- AMD Ryzen 7 7700X3D Lands as a Newegg Exclusive at $329
- Best Budget Gaming Monitors Under $300 for 1080p in 2026
- AMD Ryzen AI Halo vs NVIDIA DGX Spark: Local-AI Mini-Box Showdown
- Best Streaming Starter Kit for Creators in 2026
- 2000s LAN Party Modern Setup Guide: Hardware, Cables, and Server Stack in 2026
- Sound Blaster G6 on a Modern Retro Build: When a USB DAC Beats an AWE32
- Raspberry Pi Locator Shuts Down in July: Where to Buy a Pi Now
- Samsung Odyssey 4K vs KOORUI 27" 4K Mini-LED: Which Wins?
- AI-Driven Driver Install on WinXP: Vision LLM Walks the Audigy FX Setup
- ComfyUI on an RTX 3060 12GB: Flux and SDXL Speeds in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090