Monoprice HD-SDI RG6 BNC Cable
Bottom line: The Monoprice HD-SDI RG6 BNC Cable ($13.82 on Amazon as of 2026-11-21 17:25 UTC): True 75-ohm BNC male ends rated to 3 Gbps, enough for HD-SDI and 3G-SDI.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ True 75-ohm BNC male ends rated to 3 Gbps, enough for HD-SDI and 3G-SDI
- ✓ 18 AWG pure copper conductor, not copper-clad steel
- ✓ Dual copper and aluminum shielding cuts interference on digital video runs
- ✓ 100% sweep tested at the factory before shipping
Cons
- ✗ Price, stock, shipping and returns are set by the retailer and may have changed since this page was last updated
Manufacturer description
The Monoprice Viper Series HD-SDI RG6 BNC cable is a 6-foot serial digital video run built for real broadcast signal paths, not general-purpose coax. True 75-ohm BNC male connectors on both ends handle up to 3 Gbps of bandwidth, which covers HD-SDI and 3G-SDI video transfer between cameras, switchers, monitors, and capture cards. Inside, an 18 AWG pure copper conductor is wrapped in dual copper and aluminum shielding, so the cable holds impedance under flexing while rejecting the interference that causes sparkle and dropped frames on long digital video runs. The RG6 digital-spec construction…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Monoprice HD-SDI RG6 BNC Cable, so this read rests on the manufacturer's listed specs and the current price in the retro crt & display accessories category (how we evaluate). Compare with similarly-priced alternatives in the retro crt & display accessories category before committing. Its clearest listed strength is "True 75-ohm BNC male ends rated to 3 Gbps, enough for HD-SDI and 3G-SDI"; check that against the figure your use case actually depends on, then compare close alternatives in the Compare tool.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Transfers HD-SDI video signals over RG6 digital video coaxial cable
- Connector A & B: True 75-ohm BNC Male connectors handle 3 Gbps bandwidth
- RG6 digital spec coaxial cable | Dual copper and aluminum shielding
- 18 AWG pure copper conductor
- 75-ohm impedance | Diameter: 0.303 inches | 100% sweep tested
Full Specifications
| Brand | Monoprice |
|---|---|
| Color | Black |
| Gauge | 18 |
| Model | 116183 |
| Frequency | 3 GHz |
| Cable Type | Coaxial |
| Item Shape | Round |
| Model Name | HD-SDI RG-6 BNC Cable |
| Unit Count | 1 Count |
| Item Length | 6 feet |
| Part Number | 116183 |
| Connector Type | Coaxial |
| Number of Pins | 1 |
| Outer Material | Polyethylene |
| Connector A & B | True 75-ohm BNC Male connectors handle 3 Gbps bandwidth |
| Number of Items | 1 |
| Special Feature | Not_Performance_Used |
| Connector Gender | Male-to-Male |
| Specification Met | Hd-sdi |
| Compatible Devices | Television |
| Full listing title | Monoprice HD-SDI RG6 BNC Cable - 6 Feet - Black | for Use in HD-Serial Digital Video Transfer, Mobile Apps, HDTV Upgrades, Broadband Facilities - Viper Series |
Ready to buy?
Monoprice HD-SDI RG6 BNC Cable - 6 Feet - Black | for Use in HD-Serial Digital Video Transfer, Mobile Apps, HDTV Upgrades, Broadband Facilities - Viper Series is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-21. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Related Retro CRT & Display Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Best 1440p Gaming GPUs in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
More reviews from the SpecPicks archive
Browse all reviews →- AI Bug-Hunters Are Flooding Security Reports: Running a Local Code-Audit LLM on an RTX 3060
- Raspberry Pi OS Moves to Linux 6.18 LTS — Real Performance Gains
- Best Budget 1TB SATA SSD 2026: BX500 vs WD Blue vs SanDisk Ultra 3D vs Samsung 870 EVO
- Can You Run Local TTS on an RTX 3060 12GB in 2026?
- 8BitDo Pro 2 vs DualSense for PC Emulation: Which Controller Wins
- Black Friday KVM Switch Deals: 5 Picks for Two-PC Desks
- 360mm vs 240mm AIO: Is the Bigger Radiator Worth It in 2026?
- Qwen3.6-27B at 72 Tok/s on RTX 3090: What's Real
- RetroPie Handheld 3D Print Guide: Cases, Settings & Parts
- Best SATA SSD for a Retro Windows XP or 98 Build (2026)
- Amstrad CPC Emulator Now Runs on the Raspberry Pi Pico 2
- When OpenAI Retires a Model: Build a Local RTX 3060 Hedge
- First-Time CPU Delidding: What to Expect and How to Get It Right
- Logitech G29 vs HORI Force Feedback: Which Sim Wheel for Beginners?
- ComfyUI on an RTX 3060 12GB: Local Stable Diffusion Setup and Real Throughput
- Local AI Server Build 2026: RAM, VRAM and NVMe for 13B+ Models
- Intel Arc Pro B60 24GB: AI Workstation GPU Guide 2025
- News: Mistral Enters Robotics With Robostral Navigate 8B
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming + Streaming PC
- Ryzen 7 5800X3D vs Core i7-14700K: The 2026 DDR4 Value Fight
- Build a Home AI Assistant on a Raspberry Pi 4 8GB in 2026
- Building a Local LLM Workstation on a Raspberry Pi 5 + Ryzen 7 5800X Hybrid
- PFlash on a Single RTX 3090: 10× Prefill Speedup at 128K Context vs llama.cpp
- Qwen2.5 7B on a Budget: RTX 3060 12GB vs Ryzen 5 5600G iGPU (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090