Mount-It! Triple Monitor Mount 3 Screen Desk Stand
Bottom line: The Mount-It! Triple Monitor Mount 3 Screen Desk Stand ($71.99 on Amazon as of 2026-10-07): Holds three 13-27 inch monitors, up to 17.6 lbs each and 54 lbs total; main trade-off: mechanical swing arms, not gas springs - height changes need manual adjustment.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ Holds three 13-27 inch monitors, up to 17.6 lbs each and 54 lbs total
- ✓ All three screens rotate 180 degrees for landscape or portrait
- ✓ Outer arms tilt plus/minus 15 degrees and swivel plus/minus 45 degrees
- ✓ Weighted base or grommet mount - no desk clamp edge required
- ✓ Lifetime warranty with US-based technical support included
Cons
- ✗ Mechanical swing arms, not gas springs - height changes need manual adjustment
- ✗ 17.6 lbs per-arm limit rules out heavier 27-inch and ultrawide panels
- ✗ Center monitor lacks the tilt and swivel the two outer arms get
- ✗ Weighted base consumes desk depth a clamp-only mount would free up
Manufacturer description
The Mount-It! MI-1753 triple monitor mount replaces three separate stands with one weighted metal base, freeing the desk surface underneath while holding up to 54 lbs total. It fits three flat panels from 13 to 27 inches at up to 17.6 lbs each, using the VESA 75x75 or 100x100 patterns found on most computer monitors. Each screen rides a double-link swing arm that adjusts vertically along the center pole, so you can set an ergonomic viewing height without gas springs to calibrate or re-tension over time. The two outer arms tilt 15 degrees in either direction and swivel 45 degrees to angle…
SpecPicks Verdict
SpecPicks scored Mount-It! Triple Monitor Mount 3 Screen Desk Stand using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Mount-It!'s home & kitchen lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What size monitors does the Mount-It! MI-1753 fit?
It supports three flat monitors from 13 to 27 inches, including common 19, 20, 22, 23, 24, and 27 inch panels, with VESA 75x75 or 100x100 mounting holes.
How much weight can each arm hold?
Each of the three arms supports up to 17.6 lbs, for a combined capacity of 54 lbs. Check your monitor's spec sheet for its panel-only weight before mounting.
Can I rotate the monitors to portrait mode?
Yes. All three monitors rotate 180 degrees, so you can run any screen in portrait for code, documents, or trading charts and switch back to landscape as needed.
Does it clamp to the desk or use a grommet?
Both options ship in the box. A heavy-duty weighted metal base sits on the desk, and an integrated grommet mount lets you secure the pole through a desk hole instead.
Key Features
- Triple monitor setup for productivity and gaming – Create an efficient workstation with three aligned screens to improve workflow, reduce neck and shoulder strain, and support productivity, trading, or immersive gaming.
- Fits common monitor sizes correctly – Designed for three flat monitors from 13 to 27 inches, supporting up to 17.6 lbs per screen with VESA 75x75 or 100x100 mounting patterns used by most computer monitors.
- Adjustable mechanical monitor arms – Double-link swing arms adjust vertically on the center pole, allowing you to position each monitor at an ergonomic viewing height without gas springs or complex mechanisms.
- Practical tilt, swivel, and rotation – Two outer arms tilt ±15° and swivel ±45°, while all three monitors rotate 180° for easy switching between landscape and portrait orientation.
- Secure desk mounting with added stability – Heavy-duty weighted metal base provides solid support, and the integrated grommet mounting option allows the stand to be firmly secured to the desk surface.
- Clean cable management for a professional look – Integrated cable clips on each arm keep power and display cables organized and out of sight, helping maintain a clean, clutter-free multi-monitor setup.
Full Specifications
| Brand | Mount-It! |
|---|---|
| Color | Black |
| Material | High grade steel and aluminum |
| Model Number | MI-1753 |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating, Rotate, Swivel, Tilt |
| Mfr Part Number | MI-1753 |
| Compatible Devices | Monitor |
| Enclosure Material | High grade steel and aluminum |
| Maximum Tilt Angle | 15 degrees |
| Maximum-Supported Screen Size | 27 inches |
| Minimum-Supported Screen Size | 19 inches |
| Global Trade Identification Number | 00684758420718 |
| Full listing title | Mount-It! Triple Monitor Mount 3 Screen Desk Stand for LCD Computer Monitors for 19 20 22 23 24 27 Inch Monitors VESA 75 and 100 Compatible Full Motion, 54 lbs Capacity (MI-1753),Black |
Ready to buy?
Mount-It! Triple Monitor Mount 3 Screen Desk Stand for LCD Computer Monitors for 19 20 22 23 24 27 Inch Monitors VESA 75 and 100 Compatible Full Motion, 54 lbs Capacity (MI-1753),Black is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Best 1440p Gaming GPUs in 2026
- Best Retro Handhelds in 2026 — From $35 to $500
More reviews from the SpecPicks archive
Browse all reviews →- Rescue a Dying Retro PC: Image Your IDE Drive to CompactFlash First
- Best Parts for a Budget Ryzen + RTX 3060 Gaming PC Build in 2026
- GPT-5.6 Deleted a User's Files: Why Local, Sandboxed Agents Matter
- Mistral Medium 3.5 Dense Local Inference: Hardware Tiers from 24GB to 192GB
- Best CompactFlash + IDE Adapters for Retro PC Builds in 2026
- Mistral 7B vs Mistral Small 24B: GPU Requirements Compared
- Crucial BX500 vs Samsung 870 EVO vs WD Blue: Best Budget SATA SSD for Your Game Library (2026)
- Best Gaming Mouse for Warzone & FPS Esports in 2026
- Best Raspberry Pi for a Touchscreen Home Dashboard in 2026
- Ryzen AI Max+ 395 128GB vs Dual RTX 3060 for Local LLMs
- Best Handheld Gaming PC Under $200 in 2026
- Claude Fable 5 Tops the Intelligence Index: What Frontier Cloud AI Means for Local Rig Builders
- Intel Arc Pro B70 vLLM Support Lands — vs RTX 3060 12GB
- CompactFlash as a Silent IDE Boot Drive: A 1998-Era Build Log
- Wooden CPU Cooler: How to Build One and What to Expect
- Best Mid-Range CPU for Streaming and Gaming in 2026: Ryzen 7 5800X vs 5700X vs 5600G
- AI-Driven Driver Hunt: Installing Vintage Sound Cards on Windows 98 With Claude
- Qwen 3.6 35B-A3B on RTX 3060 12GB: Local LLM Throughput Guide (2026)
- Intel Arc Pro B60 vs RTX 3060 12GB for Local LLMs
- What Rig Runs an AI Agent Locally? Building for the Agent Era
- Intel's Bartlett Lake Core 9 273PQE Reportedly Loses to a Four-Year-Old CPU
- Best GPU for Local LLMs Under $400 in 2026: Why 12GB Still Wins
- OpenAI Says GPT-5.5-Cyber Beats Anthropic's Mythos on Security
- How nVidia Killed 3dfx — and Why Voodoo Still Haunts Every GPU Launch
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090