Fuhengli Computer PC Power Supply Tester
Bottom line: The Fuhengli Computer PC Power Supply Tester: Tests 8 connector types: 20/24-pin ATX, IDE, floppy, PCI-e 6-pin, 4-pin, EPS 8-pin, SATA; main trade-off: does not fit PCI-e 8-pin connectors - a real gap for modern GPUs.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Tests 8 connector types: 20/24-pin ATX, IDE, floppy, PCI-e 6-pin, 4-pin, EPS 8-pin, SATA
- ✓ 1.8-inch LCD shows +3.3V, +5V, +12V1, -12V, 5VSB and PG signal readings
- ✓ Buzzer alarm fires the moment a rail reads outside its normal range
- ✓ Aluminum alloy enclosure resists corrosion and stays light in a toolbag
Cons
- ✗ Does not fit PCI-e 8-pin connectors - a real gap for modern GPUs
- ✗ +12V2 rail is not shown on the LCD when testing 20/24-pin
- ✗ IDE, floppy and SATA results show only as LEDs, not numeric voltages
- ✗ LCD scratches easily; ships with a protective film you may need to peel
Manufacturer description
The Fuhengli PC Power Supply Tester turns a guessing game into a two-minute diagnostic. Plug your ATX PSU into the 20-pin or 24-pin header and the 1.8-inch LCD reports +3.3V, +5V, +12V1, -12V, 5VSB, and the PG (power-good) signal at a glance, so you can tell a genuinely dead supply from a dead motherboard before you order a replacement part. Eight connector types are covered: 20-pin ATX, 24-pin ATX, HDD/IDE, 4-pin floppy, PCI-e 6-pin, 4-pin, EPS 8-pin, and SATA. IDE, floppy, and SATA rails report through the LED row on the left edge rather than the screen, while PCI-e, 4-pin, and EPS…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for Fuhengli Computer PC Power Supply Tester, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies category before committing. On the listing's own facts, the case for it is "Tests 8 connector types: 20/24-pin ATX, IDE, floppy, PCI-e 6-pin, 4-pin, EPS 8-pin, SATA"; the main trade-off is "Does not fit PCI-e 8-pin connectors - a real gap for modern GPUs". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Does this tester work with PCI-e 8-pin GPU power connectors?
No. The manufacturer states it does not fit PCI-e 8-pin. It covers PCI-e 6-pin, EPS 8-pin, 4-pin, 20-pin ATX, 24-pin ATX, IDE/HDD, floppy 4-pin, and SATA.
What voltages does the LCD screen actually display?
From the 20-pin or 24-pin connector the 1.8-inch LCD shows +3.3V, +12V1, +5V, -12V, 5VSB, and PG. It does not display +12V2 from those headers. PCI-e 6-pin, 4-pin, and EPS 8-pin readings appear as +12V2.
How do I read SATA and IDE results?
Those are indicated by the LED lights on the left side, not the screen. A healthy 5-wire SATA connector lights +12V, +5V, and +3.3V; a 4-wire SATA lights only +12V and +5V. IDE/HDD and floppy each light +12V and +5V.
Why does the screen look scratched out of the box?
It is a protective film, not damage. The manufacturer applies it because the screen scratches easily, and notes you can peel it off yourself if you prefer the bare screen.
Is this a reliable buy for the price?
It is a low-cost first step before replacing a suspect supply. Check the product listing for current warranty terms.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- [8-in-1 ATX Power Supply Tester] -- Support test 20-pin ATX / 24-pin ATX / HDD (IDE) / Floppy 4-pin / PCI-e 6-pin / 4-pin / EPS 8-pin (NOTE: can not fit for PCI-e 8-pin) / SATA connectors
- [Aluminum Alloy Enclosure] -- Light and Easy to Carry, High Strength, Nice Thermal Conductivity & Corrosion Resistance
- [1.8'' LCD Screen] -- Outputted Voltages shows on the 1.8'' LCD Screen, Easy to Read ( The 1.8'' LCD Screen was Powered by 20-pin / 24-pin Connector ), Note: The Product Screen Has a Load of Scratches All Over It?Because The Screen is Easy to Scratch, We Put a Protective Film on It, If You Think It's Not Beautiful, You Can Tear It Off by Yourself
- [Beep Alarm] -- When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know
- NOTE: The voltage of 20pin / 24pin connectors is displayed by the LCD Screen, as "+3.3V", "+12V1", "+5V", "-12V", "5VSB", "PG" (except "+12V2" on LCD Screen); The voltage of PCI-e 6P / 4P / EPS P8 connectors is displayed by the LCD Screen as "+12V2"
- NOTE: The voltage of IDE (HDD), Floppy, SATA connector is displayed by the lights on the left of the power tester, IDE (HDD) connector is displayed by "+12V" & "+5V" lights; Floppy connector is displayed by "+12V" & "+5V" lights; SATA connector is displayed by "+12V", "+3.3V" & "+5V" lights
Full Specifications
| Brand | Fuhengli |
|---|---|
| Wattage | 500 watts |
| Model Name | Fuhengli PC Power Supply Tester |
| Unit Count | 4.2 Ounce |
| Form Factor | ATX |
| Model Number | PC - PSU Tester |
| Compatibility | PC |
| Connector Type | atx,eps,floppy,pci-e,sata |
| Cooling Method | Air |
| Output Wattage | 500 watts |
| Item Dimensions | 4.9 x 2.6 x 0.63 inches |
| Mfr Part Number | PC - PSU Tester |
| Compatible Devices | Personal Computer |
| Connector Quantity | 3 |
| Power Supply Design | Internal |
| Maximum Input Voltage | 250 volts_of_alternating_current |
| Minimum Input Voltage | 125 volts_of_alternating_current |
| Item dimensions L x W x H | 4.9 x 2.6 x 0.63 inches |
| System Bus Connector Type | 20-pin,24-pin,8-pin |
| Connector Type Used on Cable | atx,eps,floppy,pci-e,sata |
| Full listing title | Computer PC Power Supply Tester | 1.8'' LCD Screen, Aluminum Alloy Enclosure, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester |
Ready to buy?
Computer PC Power Supply Tester | 1.8'' LCD Screen, Aluminum Alloy Enclosure, ATX/ITX/IDE/HDD/SATA/BYI Connectors Power Supply Tester is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
More reviews from the SpecPicks archive
Browse all reviews →- 32GB of DDR5 Drops to $240 in New Newegg Build Bundles
- Small Form Factor Gaming PC Build Guide for 2024
- Hailo-10H AI Accelerator on Raspberry Pi 5: Real Tok/s for On-Device LLMs
- Best Streaming Gear for New Creators in 2026
- Best Noctua and Quiet-Tier CPU Coolers in 2026
- NVMe vs SATA SSD for Local LLMs: Does Disk Speed Matter?
- Best Controller for Forza Horizon 6 on PC (2026)
- Best Steam Deck Dock for 4K Gaming on a TV in 2026
- RTX 3090 vs RTX 4090 for LLM Inference: Same 24GB (2026)
- Best Steam Deck Dock for 4K Desktop Gaming in 2026: JSAUX Docking Station Tested Against the Use Case
- Advanced Shader Delivery on the RX 9070 XT: Benchmark Results
- Qwen 3.6-27B on an RTX 5070 Ti (16GB): What Fits at 50K Context and How Fast
- Voodoo5 5500 PCI in a Modern Board: Install, Glide & Win98 Setup
- Build a RetroPie Handheld with the Raspberry Pi Zero W in 2026: Full BOM + Setup
- How to Image and Preserve a Vintage IDE Hard Drive in 2026 (CompactFlash + USB Adapter Workflow)
- Best Mini PC for Local LLM Inference in 2026: Ryzen vs Apple vs Intel
- How to run Qwen 3 14B on Apple M4 Pro
- GPU Benchmark Data Freshness and Source Attribution in 2026
- Forza Horizon 6 Runs Smooth on Steam Deck — the Dock-and-Settings Combo
- Build a Silent Windows 98 Gaming PC With a CompactFlash IDE Drive
- AI-Driven Win98 Voodoo3 Driver Recovery on a Raspberry Pi 5 Companion
- Ryzen 7 5800X + RTX 5060 Combo Drops to $439 With Free Cooler
- Claude Fable 5: Anthropic Admits 'Wrong Tradeoff' on Throttling
- Downsized Your Homelab? Here's What It's Worth
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090