aemon Mini Flat Type Fuse Power Supply
Bottom line: The Amon aemon Mini Flat Type Fuse Power Supply: Mini flat-type blade format, sized for low-profile fuse blocks rather than full-size; main trade-off: no amperage rating in the listing data, so match the fuse value to your circuit.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Mini flat-type blade format, sized for low-profile fuse blocks rather than full-size
- ✓ Draws power at the fuse panel, so no long run back to the battery terminal
- ✓ Suits low-draw 12V loads like dash cams, USB chargers, and radar detectors
Cons
- ✗ No amperage rating in the listing data, so match the fuse value to your circuit
- ✗ Wire gauge and lead length are not published, which complicates load planning
- ✗ Title reads 'aemon' while the brand field reads 'Amon', so search results scatter
- ✗ No vehicle-compatibility list or warranty terms given; check the listing first
Manufacturer description
As the product name indicates, it is built around the mini flat-type fuse format, so it targets fuse blocks using the low-profile mini blade layout rather than full-size blades. The point of a fuse power supply is where it draws from: the fuse panel itself, instead of a run back to the battery terminal. For a dash cam, a radar detector, a USB charger, or another low-draw 12V accessory, you pull a circuit from a slot you already have rather than splicing into harness wiring or adding a separate distribution block. Sold under the Amon brand, the part has a 1,593-review history, which means…
SpecPicks Verdict
SpecPicks scored Amon aemon Mini Flat Type Fuse Power Supply using a rating × review-volume × price-fit model applied to published specs and reviews across the power supplies category. Amon's power supplies lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for power supplies of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this fit my car's fuse box?
It is a mini flat-type fuse part, so it suits fuse blocks that use the low-profile mini blade. Amon does not publish a vehicle compatibility list in this listing data - pull the fuse you plan to tap and compare the blade shape and size before ordering.
What amperage fuse does the Amon fuse power supply use?
The available product data does not state an amperage rating. Check the current product listing or the Amon packaging, and size the fuse to the accessory circuit you are powering rather than to the slot you are tapping.
Can I use it to power a dash cam?
A fuse tap is the usual way to feed a low-draw 12V device such as a dash cam, radar detector, or USB charger from an existing fuse slot. Confirm your device's current draw against the fuse rating you install, since the listing does not publish a maximum load.
Does it come with a warranty?
No warranty terms appear in the product data available here. Check the current Amazon product listing for Amon's stated warranty and the return window that applies at the time you order.
Full Specifications
| Brand | Amon |
|---|---|
| Voltage | 24 volts |
| Manufacturer Part Number | E511 |
Ready to buy?
aemon Mini Flat Type Fuse Power Supply is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Blue Yeti vs HyperX QuadCast 2 S: Best Streaming Mic 2026
- CPU-Only LLM Inference on a Ryzen 7 5800X: When 32GB of RAM Beats a 12GB GPU
- How to run Qwen 3 32B on NVIDIA GeForce RTX 4090
- Best SATA SSD for Gaming and Console Upgrades in 2026
- Noctua-Style Pi 5 NAS Build Goes Viral — Here's the Parts List
- Raspberry Pi Pico SDK 2.3.0 Ships: What Changed
- Fix Windows 98 SE on 1GB+ RAM: The Vcache Gotcha
- Best Budget Streaming Starter Kit for Twitch & YouTube in 2026
- Qwen3 Local: RTX 3060 12GB Build vs Mac Mini for Inference
- That $850 Prebuilt With $1,200 of Parts: What the Math Actually Says
- Is the KOORUI 27-inch 4K Mini-LED a Real Upgrade for Console Gaming?
- Can an RTX 3060 12GB Drive a 27-Inch 4K Monitor in 2026?
- Intel Optane DIMMs Run 1-Trillion-Parameter LLM on One Workstation
- Rescue a Dying Vintage IDE Drive: Imaging Retro Disks with a USB-to-IDE Adapter
- Self-Hosted Jellyfin on a Raspberry Pi 4 8GB: What 1080p Transcoding Really Costs
- RTX 5080 vs RTX 5070: Which Blackwell GPU Should You Buy in 2026?
- Noctua NH-U12S vs Cooler Master ML240L for Ryzen 5800X
- Intel Arc Pro B70 (BMG-G31) Posts Strong Linux Gaming Numbers — How It Stacks Up Against an RTX 3060
- AMD Ryzen 7 9800X3D Bundle: DDR5 + MSI B850 Wi-Fi 7 Guide
- Best Cooler for a Ryzen 7 5800X: Noctua NH-U12S vs CoolerMaster ML240L
- Building a 2001 Pentium III + GeForce 3 Win98SE Gaming Rig: A 2026 Build Log
- Best Sim Racing Setup for 2026: Wheels, Shifters and Pedals
- Best Gaming Headset for PC and Console in 2026
- Self-Hosting Immich on a Raspberry Pi 4 8GB: Power and Performance
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090