Ergotron – MXV Single Monitor Arm, VESA Desk Mount – for Monitors Up to 34 Inches, 7 to 20 lbs – White
Bottom line: The Ergotron – MXV Single Monitor Arm, VESA Desk Mount – for Monitors Up ($252.00 on Amazon as of 2026-10-07): 13 in of lift, raising the screen as high as 18.5 in above the desk; main trade-off: only fits VESA 75x75 and 100x100 mounts; larger patterns need a different arm.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Pros & Cons
Pros
- ✓ 13 in of lift, raising the screen as high as 18.5 in above the desk
- ✓ 360-degree rotation and 180-degree tilt for portrait mode or sharing the screen
- ✓ Ships fully assembled with a two-piece clamp for desktops 0.47-1.25 in thick
- ✓ 10-year Ergotron warranty plus access to technical support
Cons
- ✗ Only fits VESA 75x75 and 100x100 mounts; larger patterns need a different arm
- ✗ Rated for 7-20 lb displays only; heavier or very light screens fall outside spec
- ✗ Through-desk grommet mounting needs the separately sold 98-110 accessory
- ✗ Laptop use needs the Notebook Tray (50-193-200), sold separately
Manufacturer description
The Ergotron MXV Single Monitor Arm gives one screen up to 34 inches a full range of movement, so you can place it where your posture needs it. It holds displays from 7 to 20 lbs and mounts to VESA 75x75mm and 100x100mm patterns, which covers most current office and gaming monitors. The arm gives you 13 inches of lift and reaches 18.5 inches above the desk. It rotates 360 degrees and tilts 180 degrees, so you can switch to portrait, angle the screen toward a coworker, or lower it for close-up work without moving your chair. The V-shaped arm is light and slim, and the low-profile clamp fits…
SpecPicks Verdict
SpecPicks scored Ergotron – MXV Single Monitor Arm, VESA Desk Mount – for Monitors Up… using a rating × review-volume × price-fit model applied to published specs and reviews across the home & kitchen category. Compare with similarly-priced alternatives in the home & kitchen category before committing. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.
Common buyer scenarios for home & kitchen of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will the Ergotron MXV fit my 34-inch ultrawide monitor?
It supports screens up to 34 inches diagonal that weigh 7 to 20 lbs and use a VESA 75x75mm or 100x100mm mount. Check your monitor's weight and VESA pattern against those limits before you buy.
How thick can my desk be for the included clamp?
The two-piece desk clamp fits desktops 0.47 to 1.25 inches thick. It works on freestanding tables, panel systems and cubicles. To mount through a hole in the desk, buy grommet mount 98-110 separately.
How high can the monitor go, and can it rotate to portrait?
The arm gives you 13 inches of lift and reaches 18.5 inches above the work surface. It rotates 360 degrees and tilts 180 degrees, so it can switch between landscape and portrait.
Can I use the MXV arm to hold a laptop instead of a monitor?
Yes, with the Ergotron Notebook Tray (50-193-200), which is sold separately. The tray attaches to the arm in place of a monitor.
What warranty comes with the Ergotron MXV monitor arm?
Ergotron covers the MXV with a 10-year warranty and offers technical support. Check the product listing or Ergotron's site for full warranty terms.
Key Features
- Broad compatibility: Fits single screens up to 34 inches diagonal and 7 to 20 pounds; compatible with VESA patterns 75x75mm and 100x100mm
- Fully assembled and ready to install: Includes two-piece desk clamp for panel and cubicle systems, plus freestanding tables; desk clamp attaches to desktops 0.47 to 1.25 inches thick; accessory grommet mount available (98-110) to install through a desk surface hole
- Comfortable working: Offers full monitor movement with 13 inches of lift, rising 18.5 inches from the worksurface; customize how you work or collaborate with 360 degrees of rotation and 180 degrees of tilt
- Stylish and functional: Modern V-shaped design is sleek and lightweight; low-profile clamp fits in tight spaces; creates a neat workspace with thoughtful cable management; supports a laptop instead of a monitor with an accessory Notebook Tray (50-193-200)
- Built to last: Extensive quality testing ensures your display stays stable and secure; Ergotron products set the standard for quality with a 10-year warranty and expert technical support
Full Specifications
| Brand | Ergotron |
|---|---|
| Color | White |
| Material | Aluminum |
| Model Number | 45-486-216 |
| Mounting Type | Tabletop Mount |
| Movement Type | Articulating |
| Mfr Part Number | 45-486-216 |
| Compatible Devices | Monitor |
| Enclosure Material | Aluminum |
| Maximum Tilt Angle | 100 degrees |
| Broad compatibility | Fits single screens up to 34 inches diagonal and 7 to 20 pounds; compatible with VESA patterns 75x75mm and 100x100mm |
| Warranty Description | 10 Years |
| Maximum-Supported Screen Size | 34 inches |
| Minimum-Supported Screen Size | 1 inches |
| Global Trade Identification Number | 00698833061987 |
| EU Spare Part Availability Duration | 10 years |
Ready to buy?
Ergotron – MXV Single Monitor Arm, VESA Desk Mount – for Monitors Up to 34 Inches, 7 to 20 lbs – White is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-10-07. Price and availability subject to change.
Related Home & Kitchen
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026 — From $35 to $500
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 ($800 on Sale)
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best 1440p Gaming GPUs in 2026
More reviews from the SpecPicks archive
Browse all reviews →- Raspberry Pi 4 8GB vs Pi 5 for a 2026 Homelab: Is the Pi 4 Still Worth It?
- How to run Llama 3.1 8B on Apple M4 Pro (2026)
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming + Streaming PC
- RTX 4090 vs RTX 5090 for Local LLM Inference: 24 GB vs 32 GB (2026)
- Ryzen 5 5600G as a Budget Local-LLM Host: iGPU + System RAM in 2026
- Best Coding LLM Stack for an RTX 3060 12GB and 32GB RAM (2026)
- Intel Arc AI Training in 2026: What Workloads Actually Work
- LongCat-2.0: A Frontier Model Trained Without Nvidia GPUs
- Asus ROG Harpe II Extreme: 24K-Gold, 65K-Sensor Gaming Mouse
- Single vs. Dual Channel Memory: Intel Core Ultra 7 270K
- Run a Local LLM on a Raspberry Pi 4 8GB: What Works in 2026
- RetroPie on a Raspberry Pi 4 8GB: The Definitive 2026 Emulation Build
- AMD Ryzen AI Halo vs NVIDIA DGX Spark: Local-AI Mini-Box Showdown
- Ryzen 7 5800X vs 5700X: Best 8-Core AM4 CPU 2026
- RX 9070 XT vs RTX 3060 12GB for Local LLMs in 2026
- Active Quake 3 and OpenArena Servers in 2026 — How to Find and Join Them
- Self-Host a 24/7 FM Radio Station on a Raspberry Pi Zero 2W
- Building a Modern BYOC LAN Party Box: 8 Period-Correct Rigs for QuakeCon-Style Events in 2026
- Best Controller for PC Emulation and Retro Console Crossover (2026)
- Build a RetroPie Arcade on a Raspberry Pi 4 8GB in 2026
- Ryzen AI Max+ 395 LLM Performance: What to Expect
- vLLM vs llama.cpp for Single-User Chat on a 12GB GPU (2026)
- Play Retro Games in Your Browser: Best Emulators 2025
- Transcend CF133 CompactFlash as a Retro PC Boot Drive: Setup + Gotchas
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090