CRJ Electronics CRJ 4-Pin Peripheral Molex Extension Cable
Bottom line: The CRJ Electronics CRJ 4-Pin Peripheral Molex Extension Cable: Fully sleeved in high-density black braid to hide wiring in a windowed build; main trade-off: low-tolerance 4-pin connector needs careful pin alignment on every insertion.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ Fully sleeved in high-density black braid to hide wiring in a windowed build
- ✓ 12-inch (30cm) total length adds reach without coiling slack behind the tray
- ✓ All-black connector housings match dark PSU cables and drive bays
- ✓ Feeds legacy 4-pin IDE drives, case fans, and other Molex devices from one ATX rail
Cons
- ✗ Low-tolerance 4-pin connector needs careful pin alignment on every insertion
- ✗ 12 inches only, so long runs to a top-mounted drive cage still fall short
- ✗ Single Molex output, not a splitter to multiple drives or fans
- ✗ Molex is legacy, so it is useless on a modern SATA-only or ATX 3.x build
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CRJ Electronics CRJ 4-Pin Peripheral Molex Extension Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the power supplies & cables category before committing. On the listing's own facts, the case for it is "Fully sleeved in high-density black braid to hide wiring in a windowed build"; the main trade-off is "Low-tolerance 4-pin connector needs careful pin alignment on every insertion". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for power supplies & cables of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- This 4-pin peripheral molex extension cable allows you to extend the 4-pin power from your ATX power supply to your 4-pin IDE drives, cooling fans, and other devices.
- Premium cable construction features all black connectors and high density sleeving for minimal wire visibility.
- Note: due to the low-tolerance nature of the legacy 4-pin connector it's important to align the pins when connecting.
- Total cable length (including connectors) is 12 inches (30cm)
Full Specifications
| Note | due to the low-tolerance nature of the legacy 4-pin connector it's important to align the pins when connecting. |
|---|---|
| Brand | CRJ Electronics |
| Color | Black |
| Model | 4022 |
| Cable Type | 4-Pin Peripheral Extension |
| Item Shape | Round |
| Model Name | 4-Pin Peripheral Molex 12" Extension Cable |
| Unit Count | 1.0 Count |
| Item Length | 12 Inches |
| Part Number | 4351120202 |
| Connector Type | Female 4-pin Peripheral Molex, Male 4-pin Peripheral Molex |
| Number of Pins | 4 |
| Maximum Voltage | 12 Volts |
| Number of Items | 1 |
| Special Feature | Sleeved |
| Connector Gender | Male-to-Female |
| Compatible Devices | Personal Computer |
| Data Transfer Rate | 6 Gigabits Per Second |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Customer Package Type | sealed anti-static bag or coiled in protective tubing |
| Full listing title | CRJ 4-Pin Peripheral Molex Extension Cable - 12-inch (30cm), Black Sleeved - Extend 4-Pin Peripheral Molex Power for Computer ATX Power Supplies |
Ready to buy?
CRJ 4-Pin Peripheral Molex Extension Cable - 12-inch (30cm), Black Sleeved - Extend 4-Pin Peripheral Molex Power for Computer ATX Power Supplies is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Power Supplies & Cables
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Best GPU for 4K Gaming in 2026: Five Cards Ranked by FPS-per-Dollar
- Best X870E Motherboards for the Ryzen 7 9800X3D in 2026
- Super Mario 64 Nintendo DS Port Lands With Multiplayer Support
- Local LLM Benchmarks 2025: AMD Instinct vs Radeon Pro
- Best PC Controller in 2026: DualSense vs GameSir G7 SE vs HORIPAD
- Build a $20 DualSense PC Adapter: The Open-Source Sony Workaround
- Gemini 3.5 Flash vs Local LLM on RTX 3060 12GB: When Cloud Beats Self-Hosted
- Play Retro Games in Your Browser: Best Emulators 2025
- Best Budget GPU for 1440p Gaming in 2026: Is the RTX 3060 12GB Still It?
- CompactFlash as a Win98 Boot Drive: Transcend CF133 + IDE Adapter Walkthrough
- Best Plug-and-Play Retro Gaming Consoles in 2026: 5 Picks
- Self-Host Jellyfin on a Raspberry Pi 4 8GB in 2026: Setup and Real Transcode Limits
- Black Friday Standing Desk & Monitor Arm Deals: 5 Picks
- Best Controller for Raspberry Pi Retro Emulation in 2026
- How to Run a Public Website on a $10 ESP32 Without Servers
- RTX 3060 12GB vs Ryzen 5 5600G iGPU: Do You Need a GPU for 1080p Esports?
- GLM-5.2 Review: Running the Top Open-Weights LLM on an RTX 3060
- Raspberry Pi 4 8GB vs Ryzen 5 5600X: Gemma 3 1B Always-On
- Best SATA SSD to Upgrade a PlayStation 4 Pro in 2026
- Qwen 3.6 27B on a 12GB RTX 3060: Which Quant Actually Fits?
- Best Budget AM4 CPU for a 2026 AI + Gaming Build: 5800X vs 5700X vs 5600G
- Best Raspberry Pi 4 8GB Retro Emulation Setup in 2026
- Best GPU for AI Workstations in 2026
- Build a Budget Local-AI Rig in 2026: Ryzen 7 5800X + RTX 3060 12GB
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090