AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick with Flux
Bottom line: The AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick with Flux: One-hand cocking and trigger release, so your iron never leaves the joint; main trade-off: ABS pump body, not the aluminum barrel higher-end desoldering pumps use.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ One-hand cocking and trigger release, so your iron never leaves the joint
- ✓ Six braid spools in 2.0mm, 2.5mm, and 3.0mm covers SMD pads through big through-hole
- ✓ Rosin already loaded into the braid, no separate flux pen needed for most joints
- ✓ Nylon nozzle is anti-static and heat resistant, so it survives contact with a hot joint
Cons
- ✗ ABS pump body, not the aluminum barrel higher-end desoldering pumps use
- ✗ 1.5m per spool goes fast on dense boards; 9m total across all six
- ✗ Manual vacuum pump, no powered desoldering station suction for multilayer ground planes
- ✗ Plunger recoil can jolt the board if it is not clamped down
Manufacturer description
The AUSTOR Desoldering Sucker and Solder Braid Wick kit is a 7-in-1 solder removal set built for the kind of rework that retro PC and console repair demands. The vacuum pump uses a double-ring design with a one-hand "vacuum" trigger button, so you can cock the plunger and fire it without setting down your iron. Its ABS body pairs a non-slip sponge grip with an anti-static, heat-resistant nylon nozzle. Alongside the pump you get six rosin-loaded copper desoldering braids in three widths: 2.0mm, 2.5mm, and 3.0mm, two spools of each, 1.5m per spool. The geometrically precise weave pulls…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick with Flux, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the tools & maintenance category before committing. On the listing's own facts, the case for it is "One-hand cocking and trigger release, so your iron never leaves the joint"; the main trade-off is "ABS pump body, not the aluminum barrel higher-end desoldering pumps use". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Common buyer scenarios for tools & maintenance: PC towers accumulate significant dust in 3–6 months, so cleaning frequency drives cordless vs. canned-air tradeoff decisions. Match the device's RPM or CFM rating to your case size, and confirm battery runtime covers a full tower cleaning before ordering. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
What sizes of desoldering braid come in this kit?
Three widths: 2.0mm, 2.5mm, and 3.0mm. You get two spools of each size, six total, at 1.5m per spool.
Does the solder wick have flux already on it?
Yes. The copper braid comes with rosin, so you do not need to apply separate flux for typical joints.
Can I use the solder sucker with one hand?
Yes. The double-ring design lets you cock the plunger and press the vacuum trigger button with the same hand, keeping your other hand on the iron.
What is the pump made of and will it melt?
The body is ABS with a non-slip sponge grip, and the nozzle is nylon, rated anti-static and heat resistant for contact with hot joints.
Is this good for repairing old motherboards and consoles?
It is aimed at exactly that work: correcting mistakes on small PCBs, removing relays and other components, cleaning small components, and re-soldering. It is highly rated by users.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
- Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
- High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
- 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size
Full Specifications
| ASIN | B07CB9V427 |
|---|---|
| Material | Copper |
| Item Weight | 3.87 ounces |
| Manufacturer | AUSTOR |
| Product Dimensions | 7.48 x 5.12 x 0.79 inches |
| Batteries Included? | No |
| Batteries Required? | No |
| Date First Available | April 4, 2018 |
| Item Package Quantity | 1 |
| Is Discontinued By Manufacturer | No |
| Full listing title | AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool |
Ready to buy?
AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool is vintage hardware; the used and vintage market on eBay carries most of the live inventory. Prices and condition vary by seller and move in real time, so we link the live listing rather than quote a cached price. It also has an Amazon listing — check it for current price and availability. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Tools & Maintenance
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- How to Build a Windows 98 Retro PC in 2026
More reviews from the SpecPicks archive
Browse all reviews →- SATA vs NVMe for a Ryzen 5800X Gaming Build: Does It Matter?
- Anthropic Shutdown Reignites the AI-Sovereignty Debate — and the Case for Local Inference
- Wired vs Bluetooth Headsets for Competitive FPS in 2026: The Latency Math
- Best CPU Coolers for Ryzen in 2026: 5 Tested Picks
- Best Storage for a Raspberry Pi 4 Home Server: microSD vs SATA SSD vs NVMe
- Ex-Sega Engineer's 'Super Realistic' CRT Emulator — What It Means for Retro Mini-Consoles
- RTX 3060 12GB vs Ryzen 9 3900X for Qwen2.5 14B: GPU or CPU in 2026?
- 1080p Gaming PC Build 2026: Cost, Parts, FPS
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5080
- Microsoft + Nvidia AI PCs Run Real Agents: The Local Hardware That Matches (2026)
- Using Claude to Drive Period-Correct Win98 Driver Installs on Voodoo and GeForce 4 Hardware
- Logitech G29 vs HORI Force Feedback: Best Beginner Sim-Racing Wheel in 2026
- Best Sim Racing Wheel and Shifter for Beginners in 2026
- Best Game Controller for PC in 2026: 5 Picks From DualSense to Arcade Stick
- Gemma 3 12B: RTX 3060 12GB vs Ryzen 7 5800X CPU Offload (2026)
- AI-Driven Vintage Driver Install on WinXP: Using Vision-LLM to Walk a Voodoo + Audigy Setup
- Best Gaming Monitor for Console + PC Dual Setup in 2026
- Noctua-Style Raspberry Pi 5 NAS Build Goes Viral — What Pi 4 Owners Can Borrow
- Run DeepSeek Locally on a 12GB RTX 3060: 2026 Quant Guide
- Best Budget SATA SSD for Gaming in 2026
- Best PC Game Controller in 2026
- ChatGPT Full-Duplex Voice: What Real-Time Speech Needs on Your Desk
- Intel Arc Pro B60 Gaming Guide: 24GB Battlemage in 2026
- Build a Low-Power Jellyfin Server on a Raspberry Pi 4 8GB in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090