YPbPr Component Video Male-to-Male RCA Cable (6 Feet)
Bottom line: The HD Retrovision YPbPr Component Video Male-to-Male RCA Cable: 75 ohm coaxial cable matches video impedance to reduce ghosting and reflections; main trade-off: 6 ft (1.8 m) length is too short for long runs to a projector or across a room.
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
Pros & Cons
Pros
- ✓ 75 ohm coaxial cable matches video impedance to reduce ghosting and reflections
- ✓ 360° full-coverage shielding cuts crosstalk between video and audio lines
- ✓ Carries YPbPr component video and stereo analog audio in one cable
- ✓ Handles every YPbPr resolution up to and including 1080p
- ✓ RCA plugs fit snugly without a death-grip and don't slip out easily
Cons
- ✗ 6 ft (1.8 m) length is too short for long runs to a projector or across a room
- ✗ Male-to-male only; your source needs component outputs or a separate adapter
- ✗ Analog only; no HDMI or digital audio support
- ✗ Component YPbPr only; won't carry RGB, SCART or S-Video signals
Manufacturer description
The HD Retrovision YPbPr Component Video Male-to-Male RCA Cable connects your component video and stereo analog audio equipment at distances up to 6 feet (1.8 meters). Use it to run a component source to a TV, scaler, switch or capture device with as little loss of the analog signal as possible. Each line uses 75 ohm (75Ω) coaxial cable, which is the standard impedance for video. A mismatched cable can cause reflections and ghosting, and this one avoids that. Full 360° shielding blocks crosstalk between the video and audio lines, so picture and sound stay clean even when the cable is bundled…
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for HD Retrovision YPbPr Component Video Male-to-Male RCA Cable, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the accessories category before committing. On the listing's own facts, the case for it is "75 ohm coaxial cable matches video impedance to reduce ghosting and reflections"; the main trade-off is "6 ft (1.8 m) length is too short for long runs to a projector or across a room". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
How long is this HD Retrovision component cable?
It is 6 feet (1.8 meters) long, so it suits gear sitting near your TV, scaler or switch rather than long runs across a room.
Does this cable support 1080p?
Yes. It supports all YPbPr component video resolutions up to and including 1080p. The resolution you actually get depends on what your source outputs and what your display accepts.
Does it carry audio as well as video?
Yes. It is designed for YPbPr component video plus stereo analog audio, so one cable carries both picture and left/right sound between your devices.
Will this plug directly into my retro console?
Only if the console or its adapter has female RCA component outputs. This is a male-to-male interconnect, so consoles with a proprietary AV port need a separate component cable or adapter first.
Why does 75 ohm impedance and shielding matter for component video?
75 ohm is the standard impedance for video signals, and matching it helps prevent reflections and ghosting. The 360° shielding keeps interference and crosstalk between the video and audio lines out of the picture and sound.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- Properly interface your YPbPr component video + stereo analog audio equipment located up to 6 feet (1.8 meters) away
- Made with optimal-fitting RCA connectors without a death-grip and which also don't slip out too easily
- Supports all YPbPr video resolutions up to and including 1080p
- Full coverage 360° shielding prevents audio and video crosstalk
- Proper 75Ω (75 ohm) coaxial cable impedance for optimal video quality
Full Specifications
| Brand | HD Retrovision |
|---|---|
| Cable Type | Coaxial, Component, Composite |
| Connector Type | RCA |
| Special Feature | Shielded Cable |
| Compatible Devices | Television |
Ready to buy?
YPbPr Component Video Male-to-Male RCA Cable (6 Feet) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
Related Accessories
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
- How to Build a Windows 98 Retro PC in 2026
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- Best 1440p Gaming GPUs in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
More reviews from the SpecPicks archive
Browse all reviews →- Intel i7-9700K vs Ryzen 7 5700X for a Budget 2026 Gaming Build
- Rescue a Dying Vintage IDE Drive by Cloning It to CompactFlash
- Ryzen 5 5600G vs Ryzen 7 5700X for a Budget Gaming PC
- Self-Host Jellyfin on a Raspberry Pi 4 8GB: Real Transcoding Numbers
- OpenAI Tripled Revenue to $5.7B but Burned $3.7B: What It Means for Local AI
- Data Center CPU Demand Surge: AI Agents and the GPU Ratio Shift
- Best Streaming Kit for Beginners in 2026: Mic, Cam, and Lights
- Best Gaming Headset for PC and Console in 2026
- ComfyUI on an RTX 3060 12GB: Stable Diffusion Throughput and VRAM Limits in 2026
- AMD Ryzen AI Halo vs NVIDIA DGX Spark — or Just an RTX 3060?
- Samsung's 240Hz 1440p Gaming Monitor Drops to $169
- OpenAI Names Its Biggest Data Center Yet, With NVIDIA Backing: What It Means
- Open-WebUI vs LM Studio: Best Local LLM Front-End in 2026
- RTX 4000 SFF Ada vs RTX PRO 4000 SFF Blackwell for Local LLMs: 20GB vs 24GB at 70W
- Raspberry Pi 4 8GB vs Pi Zero W: Which Fits Your First Project?
- pxpipe: Hide Text in PNGs to Cut Claude Code Token Costs up to 70%
- BOSGAME VTA-439: AMD Ryzen AI 9 HX 470 Mini PC for Linux
- Best 4K Gaming Monitor in 2026: 5 Picks From Budget to Premium
- 768GB Intel Optane DIMM Rigs: Can Cheap Persistent Memory Really Run a 1T-Parameter LLM?
- Best CPU Cooler for AM5 Overclocking: Noctua NH-U12S vs Cooler Master ML240L
- Best CPU Cooler for Ryzen 7 5800X Overclocking in 2026
- How to run Qwen 3 14B on Apple M3 Ultra
- Best Storage Upgrades for a Legacy or Retro PC in 2026
- Set Up a Local LLM Coding Assistant in VS Code on an RTX 3060 12GB (2026)
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090