Skip to main content
2pcs LM2596 Adjustable Voltage Regulator 4.0-40V to 1.25-37V DC 36V to 24V to 12V to 5V Variable Volt Power Supply Car Motor Buck Step Down Converter with Red Voltmeter Display
Aokin

2pcs LM2596 Adjustable Voltage Regulator 4.0-40V to 1.25-37V DC 36V to 24V to 12V to 5V Variable Volt Power Supply Car Motor Buck Step Down Converter with Red Voltmeter Display

Bottom line: The 2pcs LM2596 Adjustable Voltage Regulator 4.0-40V to 1.25-37V DC 36V: Output adjusts anywhere from 1.25V to 37V for 12V, 5V, or odd retro rails; main trade-off: voltmeter needs 4V-plus input to read accurately.

Check price on Amazon

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Check price on Amazon → Compare to similar power protection

By , Founder & Editor-in-Chief · Listing data updated

Mike Perry — Hardware researcher since 2014. For retro PC hardware and period-correct parts, synthesises manufacturer documentation, community compatibility lists and marketplace listings rather than first-hand lab testing. Core beat: GPU performance across gaming, rendering, and local-LLM inference.

Pros & Cons

Pros

  • ✓ Output adjusts anywhere from 1.25V to 37V for 12V, 5V, or odd retro rails
  • ✓ Built-in voltmeter reads 0-45V with plus or minus 0.1V error
  • ✓ Button toggles the display between input and output volts, with LED to show which
  • ✓ Screw terminal blocks mean no soldering to wire it in

Cons

  • ✗ Voltmeter needs 4V-plus input to read accurately
  • ✗ Reverse-polarity protection only works with the P3 jumper cap pulled
  • ✗ No enclosure, so the bare PCB needs its own mounting and insulation
  • ✗ Output set by button presses instead of a locking trim pot

Manufacturer description

Product features:1. There are two buttons on the left side of the voltmeter, one is for input voltage display and the another is for output voltage display. You can press one of the two buttons to choose the voltmeter to display input voltage or output voltage.2.There are output voltage adjustment "-" button for decreasing output voltage and output voltage adjustment " +" for increasing output voltage.3. There are two LED indicators on this converter board, including the red LED and the green LED. The red LED will light on when you measure input voltage and green LED will light on when you…

Related Products

Other products in this category you may like:

SpecPicks Verdict

SpecPicks scored 2pcs LM2596 Adjustable Voltage Regulator 4.0-40V to 1.25-37V DC 36V… using a rating × review-volume × price-fit model applied to published specs and reviews across the power protection category. Aokin's power protection lineup sits within the broader category mid-tier; price and specs are the deciding factors over brand loyalty here. Judge it on the specification table and the price rather than on sentiment: check the figures that decide your use case, then put it side-by-side with two or three close alternatives in the Compare tool before clicking through.

Common buyer scenarios for power protection of this kind: matching it to an existing build, replacing a failing part, or upgrading from a previous-generation equivalent. Check the spec table below against your current setup — particularly socket / form-factor / power-rating fields — and confirm compatibility on the retailer's listing before purchase. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

  • Adjustable output voltage range from 1.25V to 37V continuously adjustable.
  • With voltmeter display, voltmeter error ± 0.1V, range 0 ~ 45V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage is above 4V)
  • Touch the button to switch the measurement input or output voltage, and there is an indicator to indicate which voltage is being measured, and keep the last setting, even if it is powered off and then on.
  • With terminal block, it can be easily used without soldering, and the wire bond point is retained.
  • The voltmeter can be turned off. When not needed, the jumper cap of P3 can be removed to provide reverse connection protection, and the reverse will not burn.

Full Specifications

BrandAokin
Model16073
Part Number16073
Power SourceCorded Electric
CompatibilitySwitch
Mounting TypeRack Mount
Maximum Frequency150 KHz
Specification MetCE, FCC, UL

Ready to buy?

2pcs LM2596 Adjustable Voltage Regulator 4.0-40V to 1.25-37V DC 36V to 24V to 12V to 5V Variable Volt Power Supply Car Motor Buck Step Down Converter with Red Voltmeter Display is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

Check price on Amazon →

Related Power Protection

Keep exploring SpecPicks

Other buying guides

Browse the catalog

Editorial

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
2pcs LM2596 Adjustable Voltage Regulator 4.0-40V to 1.25-37V DC 36V to 24V to 12V to 5V Variable Volt Power Supply Car Motor Buck Step Down Converter with Red Voltmeter Display
View on Amazon →