Skip to main content
Laptop SATA to IDE Adapter, Convert 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port (Parallel Type)
GODSHARK

GODSHARK Laptop SATA to IDE Adapter

Status: Laptop SATA to IDE Adapter: Unavailable on Amazon as of . SpecPicks has no in-stock listing with matching specs on file; the search below lists current offers. eBay sellers may still list this model new or used.

Bottom line: The GODSHARK Laptop SATA to IDE Adapter: Powers the drive off the 44-pin IDE port, no extra power or data cables needed; main trade-off: rated for SATA drives up to 500GB, so larger SSDs are outside spec.

Unavailable on Amazon as of

As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →

Currently unavailable on Amazon. Not the same product — 3 in-stock alternatives:

Similar: FIDECO SATA/IDE to USB 3.0 Adapter — $19.19 on Amazon as of 2026-11-20 23:13 UTC (price may vary).

Similar: SABRENT USB-C Hard Drive Docking Station — $27.99 on Amazon as of 2026-11-20 19:15 UTC (price may vary).

Similar: BENFEI SATA to USB 3.0 Cable — $15.99 on Amazon as of 2026-11-20 23:14 UTC (price may vary).

Mike Perry — Hardware researcher since 2014, focused on GPU performance across gaming, rendering, and local-LLM inference. Synthesises community benchmarks, manufacturer specs, and public forum data into actionable buying guides.

Pros & Cons

Pros

  • ✓ Powers the drive off the 44-pin IDE port, no extra power or data cables needed
  • ✓ Plug and play with no drivers, so old laptops boot the SATA drive as a normal PATA disk
  • ✓ Lets you swap a failing 2.5-inch PATA HDD for a modern 2.5-inch SATA SSD
  • ✓ Supports IDE 66/100/133MB/s modes on vintage laptop controllers

Cons

  • ✗ Rated for SATA drives up to 500GB, so larger SSDs are outside spec
  • ✗ No hot-swap support, the laptop must be powered down before connecting
  • ✗ 44-pin male output only, useless for 40-pin desktop IDE ribbons
  • ✗ IDE 133MB/s ceiling caps SATA SSD speed well below the drive's rating

Manufacturer description

Features:This SATA to IDE Adapter is the perfect solution for adding SATA drives to motherboards lacking available SATA connectivity - SATA data and power connectors.Good adapter upgrade for older 2.5"SATA HDD to new 2.5" IDE HDDWorks with all SATA Drives up to 500GBNo driver needed, plug and play, but not support hot swappableOne end of the IDE Converter is 44 Pin IDE Male connector, the other end is 7 + 15 pin SATA Female connector.The 7 Pin is SATA DATA terminal and the 15 pin is SATA power terminal.Supports IDE 66/100/133MB/sPower supply from 44-Pin IDE.Compliant with serial ATA…

SpecPicks Verdict

SpecPicks has no buyer-rating or benchmark data for GODSHARK Laptop SATA to IDE Adapter, so this read rests on the manufacturer's listed specs (how we evaluate). Compare with similarly-priced alternatives in the storage adapters category before committing. On the listing's own facts, the case for it is "Powers the drive off the 44-pin IDE port, no extra power or data cables needed"; the main trade-off is "Rated for SATA drives up to 500GB, so larger SSDs are outside spec". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.

Before ordering, match it to the drive and the host: the drive interface it takes (SATA, NVMe or other), the drive sizes it accepts, whether it powers a 3.5" drive (desktop drives need 12V, which a USB port alone does not supply), and the USB or PCIe generation of the port you will plug it into, which caps the transfer speed. Prices and stock are set by the retailer and may have moved since this page was last updated.

Key Features

Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.

  • 2.5" SATA Hard Drive to IDE 44 Pin Adapter for Laptop Drives.
  • Serial SATA To IDE bridge board, Output interface 44 pin IDE.
  • Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.
  • Adapter is good for up grading an old computer with 2.5 inch SATA HDD to a new 2.5 inch IDE HDD.
  • 44 Pin IDE connector powers the Drive no other cables or adapters are needed. No driver needed, plug and play.

Full Specifications

BrandGODSHARK
Colorblack
FinishHdmi
Unit Count1.0 Count
Finish TypeHdmi
Model Number8541644265
Input Voltage4 Volts
Connector TypeIDE, SATA
Mfr Part Number8541644265
Number of Items1
Number of Ports1
Power Plug TypeNo Plug
Compatible DevicesLaptop, PC
Smart Home CompatibilityNot Smart Home Compatible
Full listing titleLaptop SATA to IDE Adapter, Convert 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port (Parallel Type)

Ready to buy?

Amazon shows no buyable offer for Laptop SATA to IDE Adapter at the last check. A similar in-stock product is FIDECO SATA/IDE to USB 3.0 Adapter. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.

View Similar — $19.19

Related Storage Adapters

More guides & deep dives from the SpecPicks archive

Browse all articles & guides →

More reviews from the SpecPicks archive

Browse all reviews →

Earliest SpecPicks reviews

Browse full archive →
This listing is unavailable. Similar, in stock:
FIDECO SATA/IDE to USB 3.0 Adapter
Similar, in stock — $19.19 →