CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C)
Bottom line: The CanaKit 3.5A Raspberry Pi 4 Power Supply ($9.99 on Amazon as of 2026-11-20 23:20 UTC): 3.5A output exceeds the Pi 4's 3.0A spec, leaving headroom for USB peripherals; main trade-off: cable is permanently attached - no swapping it out if it fails. Another in-stock pick with the same Raspberry Pi 4: the CanaKit 3.5A Raspberry Pi 4 Power Supply with…, $12.99 on Amazon as of (price may vary).
As an Amazon Associate, SpecPicks earns from qualifying purchases. Full disclosure →
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Pros & Cons
Pros
- ✓ 3.5A output exceeds the Pi 4's 3.0A spec, leaving headroom for USB peripherals
- ✓ Built-in noise filter steadies the rail during boot and heavy CPU load
- ✓ 18 AWG cable resists the voltage drop that causes undervoltage warnings
- ✓ UL Listed, so it has passed independent electrical safety testing
Cons
- ✗ Cable is permanently attached - no swapping it out if it fails
- ✗ 5ft length may not reach outlets in rack or wall-mount installs
- ✗ USB-C only, so it will not power older micro-USB Pi 3 or Zero boards
- ✗ No inline power switch - you unplug the barrel end to cycle the board
Manufacturer description
3.5A USB-C power supply specially designed and tested for the Raspberry Pi 4 Includes noise filter for added stability 18 AWG Cable
SpecPicks Verdict
SpecPicks has no buyer-rating or benchmark data for CanaKit 3.5A Raspberry Pi 4 Power Supply, so this read rests on the manufacturer's listed specs and the current price in the single board computers category (how we evaluate). Compare with similarly-priced alternatives in the single board computers category before committing. On the listing's own facts, the case for it is "3.5A output exceeds the Pi 4's 3.0A spec, leaving headroom for USB peripherals"; the main trade-off is "Cable is permanently attached - no swapping it out if it fails". If those two points fit how you will use it, put it beside one or two close alternatives in the Compare tool to confirm the price.
Before ordering, check the listed dimensions, ports, power requirements and supported devices or systems in the spec table below against how you plan to use it, and confirm them on the retailer's listing. Prices and stock are set by the retailer and may have moved since this page was last updated.
Frequently Asked Questions
Will this stop the undervoltage lightning bolt on my Raspberry Pi 4?
In most cases, yes. The lightning-bolt icon appears when the Pi's 5V rail sags, which is typically caused by an underpowered charger or a thin cable. This unit supplies 3.5A over an 18 AWG conductor and includes a noise filter for added stability, addressing both causes.
Is 3.5A enough, or do I need more power for my Pi 4?
3.5A is above the Raspberry Pi 4's official requirement, and the extra current gives you headroom for USB peripherals such as external SSDs, keyboards, and powered hubs. This supply is specially designed and tested for the Pi 4 specifically.
Will this work with a Raspberry Pi 3 or Pi Zero?
No. This is a USB-C supply, and the Pi 3, Pi 3 B+, and Pi Zero use a micro-USB power input. It fits the Pi 4 and other boards with a USB-C power port.
How long is the cable, and can I replace it?
The cable measures 5 feet and uses 18 AWG conductors. It is part of the supply rather than a detachable cord, so plan your outlet placement around that 5-foot run.
Is this power supply electrically safe to leave running 24/7?
The unit is UL Listed, meaning it has been tested to recognized safety standards by an independent laboratory. That certification is why many buyers choose it for always-on Pi projects; check the product listing for current warranty terms.
Key Features
Quoted from the manufacturer's listing. Where it differs from the pros and cons above, those note the conditions the listing leaves out.
- 3.5A USB-C power supply specially designed and tested for the Raspberry Pi 4
- Includes noise filter for added stability
- 18 AWG Cable
- UL Listed
- 5ft Cable Length
Full Specifications
| Size | 3.5A |
|---|---|
| Brand | CanaKit |
| Model | USB-C |
| UnitCount | 1 |
| Manufacturer | CanaKit |
| IsAdultProduct | false |
| ItemPartNumber | USB-C |
Ready to buy?
CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C) is listed on Amazon. Price, availability, shipping and returns are set by Amazon and its sellers — check the listing for current terms. SpecPicks earns a small commission on qualifying purchases — thank you for supporting independent review work.
*Price sourced from Amazon.com. Last updated 2026-11-20. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Read our analysis
SpecPicks coverage that features this Single Board Computer.
Related Single Board Computers
CanaKit 3.5A Raspberry Pi 4 Power Supply head-to-head
Side-by-side specs, prices, and a pick for each matchup — no tab-switching.
More guides & deep dives from the SpecPicks archive
Browse all articles & guides →- Best 1440p Gaming GPUs in 2026
- Emulation Hardware in 2026: FPGA, Software, and Cart-Reader Ecosystems
- RTX 4070 Super vs RX 7800 XT — Which to Buy in 2026
- The Complete Voodoo5 5500 AGP Driver Guide (2026 Edition)
- How to Build a Windows 98 Retro PC in 2026
- Best Budget Gaming PC Build 2026 — ~$1,000 Parts List
- Best Retro Handhelds in 2026: Pocket, Mid-Tier and FPGA Picks
More reviews from the SpecPicks archive
Browse all reviews →- Sega Genesis Mini vs SNES Classic: Which Plug-and-Play Console Holds Up in 2026?
- Forza Horizon 6 Boots in 4 Seconds with Advanced Shader Delivery
- Raspberry Pi 5 8GB Review: Specs, Price & Use Cases (2025)
- Best Gaming PC Upgrades Under $200 in 2026: 5 Picks That Move the Needle
- Kimi K2.7 Code on an RTX 3060 12GB: Can a $300 GPU Run It?
- ComfyUI Ideogram 4: Setup, GPU Needs & Hardware Guide
- Qwen 3.6 27B at 2x tok/s: Luce DFlash on One RTX 3090
- RTX 3060 12GB Local LLM: Reddit Consensus on What Runs (2026)
- Build a Pi Zero W Handheld Retro Emulator in 2026: Full Parts List and Setup
- Build a Raspberry Pi Retro Handheld with the 8BitDo SN30 Pro
- Best CPU Cooler for a Ryzen 7 3700X: Air vs 240mm AIO in 2026
- OpenAI Codex Now Repeats a Task After Watching Once — Local Agentic Alternatives
- AI-Driven Win98 Voodoo Driver Install: A Repeatable Vision-LLM Playbook for the Sound Blaster Audigy FX
- Qwen 3.6 27B on 16GB: RTX 5060 Ti 16GB vs RX 9060 XT 16GB by Quant (2026)
- Intel Arc AI Inference: 2025 Performance & Setup Guide
- Best Budget 4K Monitor for an RTX 3060 Build in 2026: SANSUI vs KOORUI vs ASUS TUF
- Run DeepSeek Locally on a 12GB RTX 3060: 2026 Quant Guide
- Best Raspberry Pi Accessories for Home-Lab Builds in 2026
- Claude Code + Fable 5 Ported Command & Conquer to iOS in Hours: What Local Coding Rigs Need
- Cyberdeck Raspberry Pi 4/5 Mini Music Workstation Build Guide
- Best PC Gaming Controllers in 2026: 5 Picks for Every Budget
- Ryzen 7 5800X vs 5700X for Gaming and Streaming: Which AM4 Chip Wins in 2026?
- What Is AI? A Practical 2026 Guide for Makers
- Best GPU Upgrade From a GTX 1050 Ti for Local LLMs in 2026
Earliest SpecPicks reviews
Browse full archive →- Best GPU for Llama 3.1 8B (2026)
- Best GPU for Qwen 3 14B (2026)
- Best GPU for Qwen 3 32B (2026)
- Best GPU for Llama 3.1 70B (2026)
- Best GPU for DeepSeek-R1 32B (2026)
- Best GPU for Llama 3.1 405B (2026)
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 14B on NVIDIA GeForce RTX 5090
- How to run Qwen 3 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 70B on NVIDIA GeForce RTX 5090
- How to run DeepSeek-R1 32B on NVIDIA GeForce RTX 5090
- How to run Llama 3.1 8B on NVIDIA GeForce RTX 4090